2012-04-18 Shaun Ruffell * Released 2.6.1 2012-04-11 20:19 +0000 [r10657-10660] Shaun Ruffell * drivers/dahdi/xpp/xpp_dahdi.c, drivers/dahdi/xpp/xpp_dahdi.h: xpp: Fix compilation when CONFIG_DAHDI_WATCHDOG is defined. Looks like a hold over from when dahdi_span_ops was first implemented in r8985 "dahdi: Move the callbacks in dahdi_span into its own structure" [1]. [1] http://svnview.digium.com/svn/dahdi?view=revision&revision=8985 Signed-off-by: Shaun Ruffell Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10658 * drivers/dahdi/dahdi-base.c: dahdi: Fix compilation when CONFIG_DAHDI_WATCHDOG is defined. From: Mike Sinkovsky Internal-Issue-ID: DAHLIN-288 Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10655 2012-04-11 09:16 +0000 [r10651-10654] Tzafrir Cohen * drivers/dahdi/xpp/firmwares/FPGA_1161.201.hex: FPGA_1161.201.hex rev 10545: fix reset of XR1000 Previous commit (r10651) included an incorrect version. Including full message from that commit for the description. rev. 10502 of the FPGA firmware for the new E-Main rev. 4 fixes a potential issue when used on Xorcom XR1000 systems: an issue with the power supply may cause the unit to reset. Note that there is no issue with previous models, with a normal setup of an Astribank, or other XRx000 systems. Signed-off-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10652 * drivers/dahdi/xpp/firmwares/FPGA_1161.201.hex: FPGA_1161.201.hex rev 10532: fix reset of XR1000 rev. 10502 of the FPGA firmware for the new E-Main rev. 4 fixes a potential issue when used on Xorcom XR1000 systems: an issue with the power supply may cause the unit to reset. Note that there is no issue with previous models, with a normal setup of an Astribank, or other XRx000 systems. Signed-off-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10649 2012-04-05 20:34 +0000 [r10644-10648] Shaun Ruffell * drivers/dahdi/voicebus/Kbuild, drivers/dahdi/wct4xxp/Kbuild: wcte12xp, wctdm24xxp, wct4xxp: Print warning about potential GPL violation w/HOTPLUG_FIRMWARE=no. Print a warning message that it may be a GPL violation to redistribute these binaries if the firmware for the VPMOCT032/64/128/256 is compiled in. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10646 * drivers/dahdi/wcb4xxp/base.c: wcb4xxp: Remove asm/system.h include. Not needed anymore and will break compilation on Kernel versions >= 3.4 since commit 0195c00244dc2e [1] [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=0195c00244dc2e Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10641 * drivers/dahdi/dahdi_dummy.c: dahdi_dummy: Include timer.h instead of time.h It appears that some kernel configurations do not include timer.h in any of the include files that are included by dahdi_dummy. The timer_structs are defined in timer.h and not time.h, so this change is correct even though I never could find a configuation myself that actually failed to compile. This has negligible impact since dahdi_dummy is not compiled by default. Internal-Issue-ID: DAHLIN-185 Reported-by: Steve Murphy Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10640 2012-04-03 22:02 +0000 [r10628-10637] Shaun Ruffell * drivers/dahdi/dahdi-base.c: dahdi: Fix compilation when CONFIG_DAHDI_NET is defined. 'irq' field was removed from dahdi_span in r10276 "dahdi: Remove dahdi_span.irq and move dahdi_span.irqmisses into dahdi_device." [1] which was first released in dahdi-linux 2.6.0. [1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10276 Reported-by: Pavel Selivanov Internal-Issue-ID: DAHLIN-278 Patches: hdlc.patch by Pavel Selivanov (license #5420) Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10634 * drivers/dahdi/dahdi-base.c: dahdi: Fix compilation when CONFIG_DAHDI_ECHOCAN_PROCESS_TX is defined. 'ec_state' was renamed to 'dahdi_echocan_state' in r6529 [1] but support for CONFIG_DAHDI_ECHOCAN_PROCESS_TX was first committed in r9442 [2]. So it appears that I never compiled tested this exact commit when it went in for the 2.5.0 release. [1] http://svnview.digium.com/svn/dahdi?view=revision&revision=6529 [2] http://svnview.digium.com/svn/dahdi?view=revision&revision=9442 Reported-by: Pavel Selivanov Internal-Issue-ID: DAHLIN-279 Patches: ec.patch uploaded by Pavel Selivanov (License #5420) [ edited the patch slightly for minor formatting ] Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10633 * drivers/dahdi/dahdi_dynamic_loc.c: dahdi_dynamic_loc: Change and check the dyn->pvt pointer under lock. Fixes a crash on unload if the sync_tick callback was running at the same time the dynamic local span was destroyed. It was possible for dahdi_dynamic_local_transmit to dereference a pointer that may have already been freed. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10627 * drivers/dahdi/dahdi_dynamic_eth.c: dahdi_dynamic_eth: Make ztdeth_exit() symetrical with ztdeth_init() and fix race on unload. Minor change to follow generally recommended practice. Prevents new packets from being queued up for devices when they are about to be cleaned up. Also clean up any skbs that may still be on the queue after unloading. Also closes anoter potential kernel oops on module unload. It was possible to delete the private structure while the master span process was running. The result was an attempt to page memory from interrupt context. Make sure that the pvt function is set and cleared under the zlock. Also do not assume that the pvt pointer is valid in ztdeth_transmit. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10626 * drivers/dahdi/dahdi_dynamic.c: dahdi_dynamic: Close race on unload if red alarm timer was running when unloaded. I saw a kernel oops that was the result of the timer running after the dahdi_dynamic module was unloaded. Now we wait for the timer to complete, and then delete it again in case it reactivated itself. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10625 * drivers/dahdi/dahdi_dynamic.c: dahdi_dynamic: Remove calls to __module_get(). The board drivers are the ones calling the unregister function, and therefore we do not need to worry about them unloading while calling the destroy callback. When destroying spans with the ioctl, replace __module_get() with try_module_get. This avoids hitting a BUG in module_get on kernel versions < 2.6.29. ALSO move the call to try_module_get out of the dahdi_dynamic_release function and into destroy. This way if the destroy callback isn't called because the dynamic driver is unloading the dynamic device can be left on the list to be cleaned up by the dahdi_dynamic_unregister_driver function(). Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10624 * drivers/dahdi/dahdi-base.c, include/dahdi/kernel.h, drivers/dahdi/dahdi_dynamic.c: dahdi_dynamic: Do not call into dahdi_dynamic without holding reference. Instead of registering a function pointer, register a dahdi_dynamic_ops structure that contains the owner as well as the ioctl callback. This way dahdi.ko can bump up the reference count on dahdi_dynamic.ko before calling the ioctl callback. Also, use the registration mutex to guard against the module being unloaded between the time the structure pointer was checked, and the module reference is taken. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10623 2012-04-02 14:05 +0000 [r10620] Shaun Ruffell * drivers/dahdi/voicebus/vpmoct.c, drivers/dahdi/firmware/Makefile, drivers/dahdi/voicebus/Kbuild: wctdm24xxp, wcte12xp: Allow VPMOCT032 firmware to be compiled into driver. Enables the driver to update firmware on systems that do not have the firmware loader configured / enabled (Linux config option CONFIG_FW_LOADER). Compiling the firmware into the driver increase the memory footprint by around ~440K. Internal-Issue-ID: DAHDI-963 Reported-and-Tested-by: Guenther Kelleter Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10618 2012-03-29 15:28 +0000 [r10614] Shaun Ruffell * drivers/dahdi/wctdm24xxp/base.c: wctdm24xxp: Remove forward declaration of inline for GCC 3.4.4 GCC 3.4.4 does not allow forward declaration of inline functions. Internal-Issue-ID: DAHLIN-286 Reported-by: Guenther Kelleter Patches: wctdm24xxp-inline.patch uploaded by Guenther Kelleter (License #6372) Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10613 2012-03-28 Shaun Ruffell * Released 2.6.0-rc1 2012-03-22 18:36 +0000 [r10591-10594] Shaun Ruffell * drivers/dahdi/wct4xxp/base.c: wct4xxp: Trivial formatting changes around request_irq. Quiet some checkpatch warnings introduced by the last patch. I kept this separate since it may have obscured the real change made in the previous commit if combined. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10590 * drivers/dahdi/wct4xxp/base.c: wct4xxp: Disable all interrupts explicitly in interrupt handler. The driver makes the assumption that interrupts are disabled but this cannot be guaranteed. We'll explicity disable interrupts on the local processor while the interrupt handler is running. This eliminates the "IRQF_DISABLED is not guaranteed on shared IRQs" warning when loading the driver. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10589 * drivers/dahdi/dahdi_dynamic_eth.c: dahdi_dynamic_eth: Fix compilation on kernels < 2.6.22. Resolves the follwing build error: drivers/dahdi/dahdi_dynamic_eth.c: In function ‘ztdeth_exit’: drivers/dahdi/dahdi_dynamic_eth.c:448: error: implicit declaration of function ‘cancel_work_sync’ RHEL kernel versions 2.6.18-238 (5.6) and greater had cancel_work_sync() backported which is what I did my original smoke test on. Reported-by: Oron Peled Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10588 * drivers/dahdi/dahdi_dynamic_eth.c: dahdi_dynamic_eth: Prevent crash is packet arrives before span is fully configured. It was possible after a dynamic ethernet span was created for a packet to come in before the dahdi_span was fully initialized. The result would be a NULL pointer dereference. Now just discard any packets that might come in during this time window. Internal-Issue-ID: DAHLIN-280 Reported-by: Pavel Selivanov Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10587 2012-03-21 20:35 +0000 [r10575-10576] Tzafrir Cohen * drivers/dahdi/xpp/card_fxs.c: xpp: FXS: added a 'lower_ringing_noise' parameter * Adds a new parameter, 'lower_ringing_noise', to module xpd_fxs. * Makes the "power-down" behaviour that was added in upstream svn r10478, switchable in runtime. * By default (false), makes the vbat_h behave like it did before the power-down change. - I.e: vbat_h is held throughout the ringing period (during both ring-up/ring-down) - So this patch revert part of r10478 * When switched to true, activate the "power-down" behaviour. - I.e: vbat_h follows the ring-up/ring-down. - This behaviour lowers the noise caused by group ringing of FXS channels in the same unit, but causes problems with CallerID. Signed-off-by: Oron Peled Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10574 * drivers/dahdi/xpp/card_fxs.c: xpp: FXS: atomic vbat_h power handling * In do_chan_power() make vbat_h changes atomic. * As a result we can ignore duplicate requests. This will allow cleaner logic in the next commit. * Added proper debug messages. Signed-off-by: Oron Peled Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10573 2012-03-21 19:36 +0000 [r10564-10572] Shaun Ruffell * drivers/dahdi/dahdi-sysfs.c: remove a duplicate dev_set_name() Remove duplicate definition from dahdi-sysfs.c Signed-off-by: Oron Peled Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10447 * include/dahdi/kernel.h, drivers/dahdi/dahdi_dynamic.c: dahdi_dynamic: Since dynamic devices are 'parentless' we must name them. This in conjunction with r10449 "A parent-less device should not crash dahdi", this allows dahdi_dynamic spans to work post the dahdi_devices changes in 2.6.0. The full address of the device is not used since kernels prior to 2.6.31 limit the length of a devicename to 20 characters. The full address of the device can be pulled out of the "hardware_id" and "type" fields of the span. This patch is just to get things working again. dahdi_dynamic devices *may* still have issues if the auto_assign_spans module parameter is 0. Internal-Issue-ID: DAHLIN-280 Reported-by: Pavel Selivanov Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10563 * drivers/dahdi/dahdi_dynamic_eth.c: dahdi_dynamic_eth: Move tx packet flushing to process context. The masterspan can be, and often is, called with interrupts disabled but dev_queue_xmit() needs to be called with interrupts enabled. This potentially fixes a deadlock. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10562 * include/dahdi/kernel.h: dahdi: Update dev_set_name / dev_name for RHEL 5.6+. This is needed because dev_name() is mapped to kobject_name() in a backport, but the kobject name isn't set until after device_add(). The result would be parentless devices would fail since dahdi would not think a name was set for these devices. For these systems, we'll set both the bus_id string and the underlying kobject_name. Signed-off-by: Shaun Ruffell Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10561 * drivers/dahdi/dahdi-base.c, drivers/dahdi/dahdi-sysfs.c: A parent-less device should not crash dahdi * A parent-less device should not crash dahdi: - Access span->parent->dev instead of span->parent-dev.parent in soem cases. - Access span->parent->dev via new inline span_device() - Use span_device() in all dahdi_dev_{dbg,info}() * Allow low-level drivers to set their device name. - Drivers that don't use this feature get the default name based on the parent device name - Parent-less devices which don't set their name, fails to register with -EINVAL Signed-off-by: Oron Peled Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10449 * drivers/dahdi/voicebus/voicebus.h, drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wctdm24xxp/base.c: wcte12xp, wctdm24xxp: Add compile-time option to disable ASPM for PCIe devices. Certain BIOSes appear to enable ASPM even though it is not fully supported by the platform. Also, since the PCIe links for TDM cards are always in use it does not make sense to allow them to transition to the disabled state. Just turn off power management on the PCIe links completely. For more information see http://lwn.net/Articles/449448/. Internal-Issue-ID: DAHLIN-283 Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10557 * drivers/dahdi/wct4xxp/base.c: wct4xxp: Add compile-time option to disable ASPM for PCIe devices. Certain BIOSes appear to enable ASPM even though it is not fully supported by the platform. Also, since the PCIe links for TDM cards are always in use it does not make sense to allow them to transition to the disabled state. Just turn off power management on the PCIe links completely. For more information see http://lwn.net/Articles/449448/. Internal-Issue-ID: DAHLIN-283 Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10558 * drivers/dahdi/wct4xxp/base.c: wct4xxp: __t4_frame_in and __t4_framer_out slowdowns. This is a partial revert of r10234 "wct4xxp: __t4_framer_in and __t4_framer_out speedups." There were some platform + firmware version combinations that would fail to properly configure the framer with the aforementioned speedups. The originally reported sympton was that interrupts would fail to start and while troubleshooting I also saw cases where one of the spans would stay in alarm after starting. By adding in additional reads to the version register, the overall process of writing / reading from the framer control registers is slowed down which increases reliability. This change does *not* affect the main path of TDM data which is DMAed directly into buffers in host memory and are not read / written to / from framer registers directly. Reported-and-Tested-by: Vahan Yerkanian Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10559 * drivers/dahdi/dahdi-base.c, include/dahdi/kernel.h: dahdi: Add dahdi_pci_disable_link_state for kernel < 2.6.25. Will allow the ASPM (Active State Power Management) state to be disabled on PCIe devices before kernel version 2.6.25. Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10556 2012-03-20 11:20 +0000 [r10553] Tzafrir Cohen * drivers/dahdi/xpp/firmwares/USB_RECOV.hex, drivers/dahdi/xpp/firmwares/USB_FW.hex, drivers/dahdi/xpp/firmwares/FPGA_1161.201.hex: xpp: firmwares: useless 0x1A at EOF Remove a mostly harmless 0x1A (^Z) at the end of the file. If you add a NL after it, it breaks the firmware loading. Signed-off-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10550 2012-03-18 19:00 +0000 [r10537-10538] Tzafrir Cohen * drivers/dahdi/xpp/firmwares/Makefile, drivers/dahdi/xpp/firmwares/FPGA_1161.201.hex (added), drivers/dahdi/xpp/firmwares/USB_FW.201.hex (added): xpp: firmwares to support E-Main 4 USB firmware (USB_FW.201.hex 10402) and FPGA firmware (FPGA_1161.201.hex 10480) with support of the new E-Main 4 Astribank mainboard. (This was accidentally labeled as 'E-Main 3' in some previous commit messages) Also includes Makefile fixes from r10536. Signed-off-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10535 * drivers/dahdi/xpp/firmwares/USB_FW.hex: xpp: USB_FW rev 10401: minor 6FXS/2FXO caps issue Fixes an issues with the 6FXS/2FXO module: if an extra FXS or FXO module is added to a system with such a module, an excessive number of port licenses was accidentally required (as if the 6FXS/2FXO module required 8FXS/8FXO licenses). Internal-Issue-ID: #1371 Signed-off-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10534 2012-03-16 16:11 +0000 [r10524-10526] Shaun Ruffell * drivers/dahdi/dahdi_dummy.c: dahdi_dummy: Fix compilation since dahdi-linux 2.6.0. Even though dahdi_dummy is no longer built by default, the adoption of dahdi_devices in 2.6 broke the ability to compile. This was not intended as there are some packagers who still patch the Kbuild file to enable dahdi_dummy. Internal-Issue-ID: DAHLIN-274 Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10486 * drivers/dahdi/xpp/xproto.c: xpp: '%d' -> '%lu' when displaying module_refcount on kernel versions >= 3.3 Upstream commit bd77c047 "module: struct module_ref should contains long fields" changed the return of module_refcount from int to unsigned long. This change eliminates a warning from the string format specifier. Signed-off-by: Shaun Ruffell Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10485 Conflicts: drivers/dahdi/xpp/xproto.c * drivers/dahdi/xpp/xpd.h: xpp: Use 'bool' type for boolean module parameters on kernel versions >= 2.6.31. Eliminates warnings that are a result of upstream commit 72db395ffa "module_param: check that bool parameters really are bool." Signed-off-by: Shaun Ruffell Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10484 Conflicts: drivers/dahdi/xpp/xpd.h 2012-03-15 17:36 +0000 [r10489-10490] Tzafrir Cohen * drivers/dahdi/xpp/card_fxs.c: xpp: FXS: better power-down to lower noise * Now every linefeed control command which is not RING'ing powers-down the SLIC. This reduce audible noise when several channels are ringing. * Simplify code by removing redundant calls to do_chan_power() before linefeed_control() * Manage vbat_h state so we skip do_chan_power() calls when there isn't a state change * Export vbat_h state to /proc/.../fxs_info Signed-off-by: Oron Peled Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10478 * drivers/dahdi/xpp/card_global.c, drivers/dahdi/xpp/card_global.h: xpp: reset Astribank SPI busses * A driver reload should reset Astribank hardware * This patch send an SPI reset after we get AB_DESCRIPTION reply from Astribank Signed-off-by: Oron Peled Acked-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10474 2012-03-15 15:03 +0000 [r10481] Shaun Ruffell * drivers/dahdi/wctdm24xxp/base.c: wctdm24xxp: Shorten RINGOFF debounce interval from 512ms to 128ms. In commit r10168 "wctdm24xxp: Use time interval for debouncing FXO ring detect" [1], I inadvertently changed the debounce interval of the RINGOFF event from 128ms to 512ms. The result was a potential failure to detect CID, depending on line conditions, since Asterisk would bump the rx gains on the channel in the middle of the CID spill as opposed to before the CID spill. This fixes a regression first introduced in DAHDI-Linux 2.6.0. [1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10168 Internal-Issue-ID: DAHDI-951 Reported-and-Tested-by: Jack Wilson Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10473 2012-02-07 22:19 +0000 [r10457] Tzafrir Cohen * drivers/dahdi/xpp/firmwares/USB_RECOV.hex (added), drivers/dahdi/xpp/firmwares/Makefile: USB_RECOV.hex: recovering from xpp hardware issues USB_RECOV.hex, rev. 9760. It may be used to recover from certain issues of the USB controller of the Astribank (when an Astribank is not detected as such) by Support staff. Signed-off-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10455 2012-01-25 20:51 +0000 [r10445] Tzafrir Cohen * drivers/dahdi/xpp/firmwares/FPGA_FXS.hex, drivers/dahdi/xpp/firmwares/FPGA_1141.hex, drivers/dahdi/xpp/firmwares/FPGA_1151.hex: Astribank I firmwares rev. 7107 A slightly newer firmware (Xorcom rev. 7107) for older (non Astribank II) Astribank modules. Was accidentally left uncommited. Includes minor bug fixes. No change for any relatively recent (Astribank II) Astribank. Signed-off-by: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10443 2012-01-17 14:50 +0000 [r10442] Tzafrir Cohen * README, drivers/dahdi/Kbuild: Build OSLEC EC if in the tree Build the OSLEC echo canceller (drivers/staging/echo and dahdi_echocan_oslec) if the code of oslec is present in the tree. Also closing another issue regarding documentation of building OSLEC, as it is now even clearer than before. Patch has been used in the Debian package for quite some time. Signed-off-by: Tzafrir Cohen (closes issue DAHLIN-110) Reported by: biohumanoid (Pavel Selivanov) Patches: oslec_auto.diff uploaded by tzafrir (license 5035) (closes issue DAHLIN-261) Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10440 2012-01-10 22:09 +0000 [r10415-10419] Shaun Ruffell * drivers/dahdi/xpp/xbus-core.c: xpp: handle failures during dahdi_register_device() * If dahdi_register_device() failed, not all resources were freed. When dahdi_unregister_device() was called later (during driver removal) a panic was caused. * Add proper error handling for possible failures in xbus_register_dahdi_device(): - new xbus_free_ddev() safely free an xbus->ddev - This is called from all failures points. - It is also called from xbus_unregister_dahdi_device() Signed-off-by: Oron Peled Acked-By: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10410 * drivers/dahdi/xpp/xpp_dahdi.c, drivers/dahdi/xpp/xbus-core.c: xpp: Don't deactivate XPDs on unregistration * A bug was introduced during migration to dahdi_device code: http://svnview.digium.com/svn/dahdi?view=rev&rev=10273 * Marking XPDs as non-functional (card_present=0, XPD_STATE_NOHW) was moved from xbus_request_removal() into xpd_dahdi_preunregister() * As a result, unregistering an Astribank, made it non-functional so trying to re-register it later caused errors (e.g: "Cannot open" error message from xpp_open()) * This fix move XPD deactivation into the proper location (during xbus_deactivate() Signed-off-by: Oron Peled Acked-By: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10409 * drivers/dahdi/xpp/xpp_dahdi.c: xpp: bugfix: fix bad refcount Code path called in error condition contained an superflous put_xpd() call Signed-off-by: Oron Peled Acked-By: Tzafrir Cohen Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10408 * drivers/dahdi/wct4xxp/vpm450m.c: wct4xxp: VPM module creates noise on alternate channels on E1 spans. The VPMOCT128 module was using the VPMOCT256 timeslots assigments which would mean that channels that should be marked alaw were being set in ulaw. This only affected E1 spans since by default all spans are configured for ulaw by default. This fixes a regression introduced in r10290 [1] "wct4xxp: Add support for TE820 and VPMOCT256", first released in 2.6.0, that only affects E1 spans on a quad and dual-span card when used with the hardware echocanceler. [1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10290 Internal-Issue-ID: DAHDI-945, DAHLIN-275 Signed-off-by: Shaun Ruffell Acked-by: Russ Meyerriecks Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10414 * drivers/dahdi/wctdm24xxp/base.c: wctdm24xxp: FXS on-hook transmission timer incorrect. The DAHDI_ONHOOKTRANSFER ioctl was incorrectly setting the ohttimer to 0. The result was that an FXS port was leaving the on-hook transfer state before finishing the transmission. This was discovered while looking at why ./fxstest dtmfcid was not able to pass the DTMF callerid digits to an attached FXO port properly. Fixes a regression introduced in r10167 "wctdm24xxp: Use interval for checking FXS on hook transfer timer." [1], first released in 2.6.0. [1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10167 Signed-off-by: Shaun Ruffell Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10413 2012-01-04 22:19 +0000 [r10406] Shaun Ruffell * / (added): Creating branch for 2.6.