2012-04-18  Shaun Ruffell <sruffell@digium.com>

        * dahdi-tools version 2.6.1 released.

2012-03-28  Shaun Ruffell <sruffell@digium.com>

        * dahdi-tools version 2.6.1-rc1 released.

2012-03-22 19:01 +0000 [r10596]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hook: xpp: astribank_hook: wait for udev to settle
	  When running the astribank_hook (only on Astribanks, in
	  XPP_HOTPLUG_DAHDI mode), wait for all other Astribanks to create
	  all the required device files. Signed-off-by: Oron Peled
	  <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10585

2012-03-20 11:53 +0000 [r10547-10555]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_license.c: xpp: astribank_allow: useless debug on
	  write Remove a useless debug message in the "write" operation.
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10549

	* xpp/astribank_license.c, xpp/echo_loader.c, xpp/xtalk/xtalk.c,
	  xpp/astribank_allow.c, xpp/fpga_load.c: xpp: fix build warnings
	  Unlike original: also fixed fpga_load. Signed-off-by: Tzafrir
	  Cohen <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10543

	* xpp/oct612x/octdeviceapi/oct6100api/oct6100_miscellaneous_priv.h,
	  xpp/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_chip_open.c,
	  xpp/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_channel.c,
	  xpp/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tsst.c,
	  xpp/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_interrupts.c,
	  xpp/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_conf_bridge.c:
	  xpp: oct612x: fix build warnings Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10542

2012-03-15 21:49 +0000 [r10515-10523]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/USB.pm: xpp: Update product ID's
	  in Dahdi::Hardware::USB Signed-off-by: Oron Peled
	  <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10505

	* xpp/astribank_hexload.8: xpp: fix manpage of astribank_hexload *
	  Fixed 'astribanks_tool' string Signed-off-by: Oron Peled
	  <oron.peled@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10503

	* xpp/astribank_license.c (added), xpp/astribank_allow.8,
	  xpp/astribank_license.h (added), xpp/Makefile,
	  xpp/astribank_allow.c: xpp: Customizable license markers *
	  License strings markers (BEGIN.../END...) can be customized * By
	  default, generate a "generic" license markers * We accept any
	  (paired) markers from the valid list Signed-off-by: Oron Peled
	  <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10502

	* xpp/echo_loader.c: xpp: bugfix: handle echo_loader errors * I/O
	  errors of the device were not propagated up by echo_loader * As a
	  result, Octasic load failure did not prevented USB renumeration *
	  Make consistent return values: - In our functions: ret < 0 is
	  error - In Octasic functions (UINT32): return Octasic error codes
	  * All error paths prints error messages (so we see how the error
	  propagates) * Also changed error order testing in init_octasic():
	  Return status should be tested before the values of by-reference
	  parameters Signed-off-by: Oron Peled <oron.peled@xorcom.com>
	  Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10499

	* xpp/echo_loader.c, xpp/astribank_usb.h: xpp: echo_loader.c: add
	  AB id to messages * Define new macros AB_INFO(), AB_ERR() that
	  prefix their message with the astribank information (usb device +
	  serial number) * Replace all INFO()/ERR() messages in
	  echo_loader.c with the new macros Signed-off-by: Oron Peled
	  <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10498

	* build_tools/dump_sys_state: improve build_tools/dump_sys_state *
	  Use the new dahdi_sysfs_copy script * Clean old/unused code * Add
	  notification output * Now always creates a tarball - the gzipped
	  copy is many times smaller. * Without arguments, tarball name is:
	  sys_dump.<hostname>_<date>_<time>.tar.gz Signed-off-by: Oron
	  Peled <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10497

	* build_tools/dahdi_sysfs_copy (added): new
	  build_tools/dahdi_sysfs_copy Short perl script to copy dahdi
	  related sysfs trees into a designated directory. Signed-off-by:
	  Oron Peled <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10496

	* xpp/xpp_fxloader: xpp: xpp_fxloader: improve output * Replaced
	  (almost) all $LOGGER to echo: - In interactive use -- that what
	  we want anyway - When called from UDEV, the subprocess
	  stdout/stderr is piped to $LOGGER anyway (at the end of the
	  script) - No need for many $LOGGER instances (each with its own
	  pid) Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by:
	  Tzafrir Cohen <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10495

	* xpp/mpptalk_defs.h, xpp/mpp.h, xpp/mpptalk.c: xpp: clean
	  'Extrainfo' EEPROM field * Extrainfo field contains junk data *
	  Caused by: - The field is initialized to 0xFF values - There was
	  no null termination (and no room to add it) * New code: - Ensure
	  that show_extrainfo() have null termination even if EEPROM field
	  is full. - Replace trailing 0xFF characters with '\0' when
	  reading this field - Since our default burned EEPROM contain
	  Extrainfo field full of 0xFF characters, this would make them
	  look as null filled. Internal Issue-Id: #1341 Signed-off-by: Oron
	  Peled <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Origin:
	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10491

2012-01-04 22:20 +0000 [r10407]  Shaun Ruffell <sruffell@digium.com>

	* / (added): Creating branch for 2.6

2012-01-03  Shaun Ruffell <sruffell@digium.com>

        * dahdi-tools version 2.6.0 released.

2011-12-04 17:08 +0000 [r10366-10368]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_usb.c: xpp: two extra product IDs: 1112, 1164 Two
	  extra USB product IDs used in some odd maintenance scenarios.
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader: xpp: xpp_fxloader: regressions from r10348 *
	  Avoid a duplicated run of udev on some systems. * Fix usage of
	  astribank_tool's output. Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-11-30 20:15 +0000 [r10348-10358]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: DAHDI-perl: Fix PCI ID
	  for Rhino R4T1 (0b0b:0305) (Closes issue DAHTOOL-56)
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader: xpp: recovery firmware in xpp_fxloader
	  USB_RECOV.hex is an extra firmware that may be useful for
	  recovering from certain Astribank hardware faults in some
	  scenarios. This adds support for either loading it manually
	  ('/usr/share/dahdi/xpp_fxloader recover-sb') or through udev,
	  *if* the required udev rules were set on the system.
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader, xpp/xtalk/xusb.c: xpp: Serialized Parallel
	  load; E-Main-3 firmware This introduces support for loading
	  multiple firmwares in parallel also for the case of a manual
	  load. This is anyway the case for an automatic load from udev. *
	  libusb needs to scan the bus all too often. This causes
	  occasional failures for opening devices. * Thus introduce a
	  semaphore to serialize uses of libusb. E-Main-3 firmware differs
	  by a different value of bcdDevice: * Read this from the sysfs
	  devices tree. * Fall back to lsusb -v (much slower) is sysfs not
	  available. Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-11-21 15:25 +0000 [r10343]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hexload.c: xpp: astribank_hexload: we need more
	  lines * Newer firmwares may have more lines. * While we're at it,
	  add better debug printing. * Remove some unused debugging code.
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2011-11-02  Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.6.0-rc1 released.

2011-11-02 21:57 +0000 [r10311]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_maint.c, dahdi_cfg.c: Fix GCC 4.6 "set but not used"
	  warnings Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2011-11-02 20:55 +0000 [r10308]  Shaun Ruffell <sruffell@digium.com>

	* xpp/perl_modules/Dahdi/Span.pm: dahdi_genconf: Allow it to
	  recognize the TE8xx 8-port cards. Signed-off-by: Shaun Ruffell
	  <sruffell@digium.com>

2011-11-02 20:10 +0000 [r10306]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* doc/dahdi_cfg.8, dahdi_cfg.c: dahdi_cfg: add '-S <spanno>' and
	  '-C <chan-ranges>' * dahdi_cfg -S <num>: only apply changes to
	  span <num>. * If span is analog (no 'span=<num>,<channels>,...'
	  statement in system.conf), we need to set range: -C <channels> *
	  With the <basechan> and <channels> attributes in sysfs we easily
	  configure each device on the fly. Simply run: dahdi_cfg -S
	  <spanno> -C <basechan>+<channels>-1 from udev script
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by:
	  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2011-11-01 18:10 +0000 [r10293]  Russ Meyerriecks <rmeyerreicks@digium.com>

	* Makefile, dahdi_pcap.c (added): dahdi_pcap: Imported user space
	  utility for managing pcap streams This utility will export packet
	  captures for channels in dahdi. It requires CONFIG_DAHDI_MIRROR
	  to be defined in dahdi-linux as it uses the unsupported
	  DAHDI_MIRROR ioctl interface. Internal-Issue-ID: DAHTOOL-49 From:
	  Torrey Searle <tsearle@gmail.com> Signed-off-by: Russ Meyerriecks
	  <rmeyerriecks@digium.com> Acked-by: Shaun Ruffell
	  <sruffell@digium.com>

2011-10-23 14:43 +0000 [r10264-10267]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: dahdi_perl: Use
	  $Dahdi::sys_base for sysfs pathes Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm: xpp_order
	  generator: ignore EC XPD The xpp_order configuration generator
	  should only loop over telephony devices, not all spans.
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm: chandahdi gen:
	  extens can have any num of digits Don't force extens we generate
	  to have exactly 4 digits (simple formatting limitation).
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hexload.8, xpp/astribank_tool.8,
	  xpp/astribank_allow.8: Typos in man pages: toolyou Signed-off-by:
	  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2011-09-29 17:00 +0000 [r10213-10216]  Shaun Ruffell <sruffell@digium.com>

	* dahdi_test.c: dahdi_test: Enforce range from 0.0% - 100.0% for
	  accuracy. Also makes sure that the percentage output from the
	  verbose and non-verbose modes of timer_test are the same and
	  print a cumulative accuracy which smooths out the jitter for each
	  pass. If the time it takes to read in 1 second worth of data is
	  longer than 1 second accuracy will be 0%. (closes issue #18573)
	  Reported by: smurfix Signed-off-by: Shaun Ruffell
	  <sruffell@digium.com>

	* dahdi_maint.c: dahdi_maint: Print 'unsupported' warning if
	  framing errors is -1. Warn the user if attempting to monitor a
	  statistic that the particular board driver does not appear to be
	  collecting. The wcte12xp in r10212 in now fills in -1 for any
	  statistic it does not collect and other digital cards can do the
	  same. Signed-off-by: Shaun Ruffell <sruffell@digium.com>
	  Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>

	* xpp/perl_modules/Dahdi/Span.pm: dahdi_genconf: Use 'dahdi_scan'
	  to determine span_type for B410P cards. The wcb4xxp driver does
	  not put enough information in the proc filesystem to determine if
	  the ports are in TE or NT mode. Previously the ports would always
	  just setup the dahdi-channels.conf file in TE mode. After this
	  change the dahdi_scan utility is used to detect if the ports are
	  in TE or NT mode and setup dahdi-channels.conf appropriately.
	  Internal-Issue-ID: DAHTOOL-54 Signed-off-by: Shaun Ruffell
	  <sruffell@digium.com>

	* xpp/perl_modules/Dahdi/Span.pm: dahdi_genconf: Assume spans with
	  unknown term types are software selectable. Resolves a regression
	  on the 2.5 branch that would result in: $ dahdi_genconf
	  dahdi_genconf: missing default group (termtype=UNKNOWN) E1 / T1
	  spans use software configuration to set CPE / NET mode. This
	  patch will just assume that a termtype is software selectable if
	  it was "UNKNOWN" when first scanning the span. Internal-Issue-ID:
	  DAHTOOL-55 Signed-off-by: Shaun Ruffell <sruffell@digium.com>
	  Tested-by: David Purdue <support@noojee.com.au>

2011-09-09 13:45 +0000 [r10194-10198]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_maint.c, doc/dahdi_maint.8 (added): Man page for
	  dahdi_maint Fix dahdi_maint's usage message while we're at it.
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* doc/dahdi_monitor.8: Update the dahdi-monitor man page
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_hardware, xpp/dahdi_genconf, xpp/lsdahdi: fix typos in
	  some xpp utils Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-09-05 09:05 +0000 [r10177]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/waitfor_xpds: xpp: waitfor_xpds: higher and configurable
	  timeout On several pathological cases we may need to wait more
	  than 40 seconds. Make that timeout configurable.

2011-08-25 10:32 +0000 [r10153]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/USB.pm: dahdi-perl: Also get USB
	  loaded driver from usbfs Signed-off-by: Oron Peled
	  <oron.peled@xorcom.com> Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-08-18 15:38 +0000 [r10142]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen/Freepbxdb.pm (added):
	  dahdi-perl: Freepbxdb config generator Use 'dahdi_genconf
	  freepbxdb' to generate the required astdb entries for Asterisk to
	  use the extensions generated by dahdi_genconf. Requires asterisk
	  to be running. This module is intended for testing as it bypasses
	  standard FreePBX functions only and hence may not work properly
	  with Freepbx. Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-08-10 15:31 +0000 [r10104]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/README.Astribank: README.Astribank: HWEC and build
	  instructions Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-08-09 13:11 +0000 [r10101]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Span.pm: xpp: pri_termtype: match complete
	  SPAN patterns Match complete span patterns, to avoid pattern
	  'SPAN/1' from matching e.g. span 12 (SPAN/12). Signed-off-by:
	  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2011-08-05  Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.5.0 released.

2011-08-02 17:28 +0000 [r10085-10087]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* README: Extra README fixes: 'th' and ztcfg Signed-off-by: Tzafrir
	  Cohen <tzafrir.cohen@xorcom.com>

	* README: spelling: ocnfig.status and such Signed-off-by: Tzafrir
	  Cohen <tzafrir.cohen@xorcom.com>

2011-07-21  Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.5.0-rc2 released.

2011-07-21 17:29 +0000 [r10071]  Russ Meyerriecks <rmeyerreicks@digium.com>

	* patlooptest.c: patlooptest: Ignore the first buffered event Fixes
	  the feature introduced in r9909 that allows patlooptest to
	  monitor channel events. Patlooptest was reporting events that we
	  don't care about, prior to reading from the channel. This fix
	  ignore the first event read on a channel and reports all
	  subsequent events properly. Signed-off-by: Russ Meyerriecks
	  <rmeyerriecks@digium.com>

2011-07-21 13:40 +0000 [r10068]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hook: astribank_hook: startup lock and more *
	  Silently exit right away if user did not set XPP_HOTPLUG_DAHDI. *
	  Only one Astribank should be allowed to run the startup script: -
	  Protect that section with a "lock" (symlinking a file). - Sadly
	  we can't rely on /run and may have to wait for a r/w file-system.
	  - And thus even this waiting needs to be run in the background as
	  to not hold udev. Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-07-12  Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.5.0-rc1 released.

2011-07-12 23:01 +0000 [r10040]  Shaun Ruffell <sruffell@digium.com>

	* xpp/perl_modules/Dahdi/Span.pm: Span.pm: Process the
	  /proc/dahdi/<x> files atomically. It is possible that the
	  contents of the proc files can change while the perl modules are
	  in the processing of processing them. Specifically, if lsdahdi is
	  called on boot before the channels are configured, the channel
	  will be "probed" to determine if it's an FXO or FXS channel and
	  that can result in the output of proc changing. When the size of
	  proc changes, the script can get confused about where the
	  beginning of the next line is. This patch reads in the proc file
	  completely into memory first, and then starts processing each of
	  the lines. This resolves the "Unrecognized garbage 'INACTIVE)' in
	  -" that is displayed on boot with the recent trunk of DAHDI.
	  Signed-off-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by:
	  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2011-07-11 18:02 +0000 [r10034]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hexload.c: xpp: astribank_hexload: yes, we
	  HAVE_OCTASIC Hardwire this for now, as this does not come from
	  autoconf.

2011-07-10 16:25 +0000 [r10030-10032]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hexload.8, xpp/waitfor_xpds, xpp/README.Astribank,
	  xpp/echo_loader.h (added), xpp/xpp_fxloader,
	  xpp/astribank_tool.c, xpp/Makefile, xpp/astribank_allow.c, xpp,
	  xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/astribank_hexload.c,
	  xpp/dahdi_registration, xpp/echo_loader.c (added): xpp: support
	  loading Octasic EC firmware Echo Cancellation firmware is loaded
	  by xpp/stribank_hexload (Using the oct612x code). *
	  astribank_hexload: options -O/-o/-A for handling the Octasic echo
	  cancellation firmware. * astribank_tool: report that. *
	  xpp_fxloader: Run astribank_hexload, if needed. * dahdi_perl: The
	  EC module is an extra XPD, but not a "telephony device" and hence
	  not a span. Deal with that. * waitfor_xpds: may need to wait a
	  bit longer for firmware loading. Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

	* xpp/oct612x (added): xpp: A copy of oct612x in dahdi-tools
	  Include a copy of the oct612x Octasic echo canceller interface to
	  be used by astribank_hexload to load the echo canceller firmware
	  to a Xorcom Astribank.

2011-07-05 20:13 +0000 [r10026]  Shaun Ruffell <sruffell@digium.com>

	* system.conf.sample: system.conf.sample: Add note regarding cross
	  connecting spans on B410P. There is an issue with the hardware on
	  the B410P that makes it unreliable to connect one of the ports to
	  another port for testing. Signed-off-by: Shaun Ruffell
	  <sruffell@digium.com>

2011-06-23 17:33 +0000 [r9986]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Xpp.pm: fix registration order for more
	  than 9 Astribanks The sorting function for SORT_XPPORDER
	  accidentally sorted the Astribank priorities from the xpp_order
	  file (/etc/dahdi/xpp_order) lexicographically instead of
	  numerically, that is: 10 before 2. Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com>

2011-06-16 09:35 +0000 [r9979]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_genconf, xpp/perl_modules/Dahdi/Span.pm: dahdi_genconf:
	  apply termtype to Digium HA8 BRI Make the pri_termtype setting in
	  genconf_parameters apply to any BRI/PRI carddeclared as "soft
	  NT". ATM, this is only the Xorcom E1/T1 device and the Digium HA8
	  (BRI) module of the TDM card. Signed-off-by: Tzafrir Cohen
	  <tzafrir.cohen@xorcom.com> Acked-by: Shaun Ruffell
	  <sruffell@digium.com>

2011-06-07 19:44 +0000 [r9975]  Kinsey Moore <kmoore@digium.com>

	* patgen.c, patlooptest.c, pattest.c: tools: Allow pattern tools to
	  access channels above the device file limit pattest and patgen
	  already had this capability, but there were cases in which they
	  would act unexpectedly. Now, if the name specified is not a
	  character device file, it will be treated as a channel number if
	  possible. Acked-by: Shaun Ruffell <sruffell@digium.com>

2011-06-07 10:28 +0000 [r9973]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hexload.c: xpp: this is the right place for
	  astribank_close()

2011-05-24 15:14 +0000 [r9919-9920]  Shaun Ruffell <sruffell@digium.com>

	* zonedata.c: zonedata: Add support for United Arab Emirates. This
	  was provided for interop with analog lines provided by Etisilat.
	  DAHDI-796. Signed-off-by: Shaun Ruffell <sruffell@digium.com>

	* zonedata.c: zonedata: Add support for Costa Rica. Add in the
	  costa Rica zonedata. (closes issue #19069) Reported by:
	  desafiocostarica Signed-off-by: Shaun Ruffell
	  <sruffell@digium.com>

2011-04-18 21:20 +0000 [r9909]  Kinsey Moore <kmoore@digium.com>

	* patlooptest.c: tools: Allow patlooptest to activate and handle
	  buffer events The new buffer events code introduced in revision
	  9905 gives userspace processes an interface to activate detection
	  of buffer over and underflows. This change allows patlooptest to
	  take advantage of that feature to better inform users of the
	  cause of pattern errors. Acked-by: Shaun Ruffell
	  <sruffell@digium.com> (original patch by Matt Fredrickson)

2011-03-16 14:32 +0000 [r9830-9831]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_is_starting.c: astribank_is_starting.c: do have
	  timeout (typo) Due to a typo the option for not using a timeout
	  was always used. Regression since r9426.

	* dahdi.init: dahdi.init: LSB short description

2011-03-10 18:48 +0000 [r9825]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xtalk/xtalk.c (added), xpp/astribank_hexload.8, xpp/mpptalk.c
	  (added), xpp/xtalk/xusb.h (added), xpp/xtalk/debug.c (added),
	  xpp/xpp_fxloader, xpp/xtalk/xtalk.h (added),
	  xpp/astribank_tool.c, xpp/xtalk/xtalk_defs.h (added),
	  xpp/astribank_allow.c, xpp/mpptalk.h (added), xpp/mpptalk_defs.h
	  (added), xpp/xtalk/debug.h (added), xpp/astribank_hexload.c,
	  xpp/xtalk/xlist.c (added), xpp/debug.c (removed),
	  xpp/astribank_usb.c, xpp/mpp_funcs.c (removed), xpp/debug.h
	  (removed), xpp/xtalk/xlist.h (added), xpp/Makefile,
	  xpp/astribank_usb.h, xpp/mpp_funcs.h (removed),
	  xpp/astribank_tool.8, xpp/astribank_allow.8, xpp/mpp.h,
	  xpp/pic_loader.c, xpp/xtalk (added), xpp/xtalk/xusb.c (added):
	  xpp: use 'xtalk' for the USB access code * Move most of the USB
	  access code from xpp/ to xpp/xtalk/ . * astribank_tool and such
	  tools can now use a shorter -D mmm/nnn rather than a full path.
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by:
	  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2011-03-03 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.4.1 released.

2011-02-08 14:42 +0000 [r9733-9744]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, xpp/perl_modules/Dahdi/Chans.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi-perl: more
	  left-over $span->xpd Replace the remaining $span->xpd with
	  xpd_of_span(). Following up on r9648. Merged revisions 9731 via
	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk

	* xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: fix xpp
	  driver in dahdi_hardware Don't require 'dahdi_hardware -v' to
	  show the driver for a USB device. Only works when the usbfs is
	  not used (when /proc/bus/usb is not mounted). Signed-off-by:
	  Tzafrir Cohen <tzafrir.cohen@xorcom.com> Merged revisions 9699
	  via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk

	* /, xpp/perl_modules/Dahdi/Span.pm: dahdi-perl: left-over
	  $span->xpd Replace one remaining $span->{XPD} with xpd_of_span().
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> Merged
	  revisions 9648 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

	* /, xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi_genconf:
	  Don't generate configurations that use channel 16 on E1 CAS
	  Attempting to use channel 16 on E1 CAS is disallowed since that
	  channel is reserved for RBS signaling. Configurations should not
	  be generated that attempt to use it. Closes DAHDI-763. Patch by
	  dmartinez. Merged revisions 9485 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

	* /, xpp/xpp_fxloader: xpp_fxloader: Don't try to load FPGA
	  firmware twice When called from udev to load the FPGA firmware,
	  make sure that this is not the event generated for the first
	  end-point of the existing two, as we need to talk with the second
	  one. This is probably better done in the udev rules, but will be
	  slightly more complicated to apply only to the FPGA loading and
	  not to USB firmware loading. Merged revisions 9482 via svnmerge
	  from http://svn.digium.com/svn/dahdi/tools/trunk

	* dahdi_scan.c, /: dahdi_scan: Show CAS framing on the framing
	  line. Also, always append "/CRC4" on any span where that was
	  specified as an option. Signed-off-by: Shaun Ruffell
	  <sruffell@digium.com> Acked-by: Kinsey Moore <kmoore@digium.com>
	  Merged revisions 9473 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

	* dahdi_scan.c, /: Fixed up the loss of crc4-multiframe alignment
	  logic Loss of crc4-multiframe alignment on an E1 link is not a
	  condition which brings the span down. The span will continue to
	  run as long as it can maintain double frame alignment. Because of
	  this, we cannot place the LMFA alarm in the usual spaninfo.alarms
	  member, due to userspace programs using this as a catch-all for a
	  span being up or down. We can detect the alarm by watching the
	  frame error counter (fecount). If it continuously increments, the
	  span is configured for crc4, and the span remains OK (alarms =
	  0), then we are in loss of crc4-multiframe state. In order to
	  test this alarm, you'll need to synthesize a loss of crc4
	  alignment on the span. You can usually do this by configuring the
	  local span to use crc4 and the remote end to not use crc4. I used
	  the Fireberd 6000 in my lab to do this. dahdi-743 & dahdi-420
	  Acked-by: Shaun Ruffell <sruffell@digium.com> Merged revisions
	  9458 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm, /: Dahdi::Hardware:
	  Support beroNet BN4S0e PCI Express card Add extra PCI IDs to
	  support "beroNet BN4S0e PCI Express 4x S0 Karte". Origin:
	  http://bugs.debian.org/600839 Merged revisions 9452 via svnmerge
	  from http://svn.digium.com/svn/dahdi/tools/trunk

	* autoconfig.h.in, xpp/astribank_is_starting.c, /, configure,
	  configure.ac: astribank_is_starting: use semop if no semtimedop
	  astribank_is_starting should use a timeout for the semaphore, but
	  if the GNU-specific semtimedop() is not available, we'll just
	  fall back to using semop with no time out. Not as good, but
	  better than nothing. (closes issue #16783) Reported by: abelbeck
	  Merged revisions 9426 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

	* /, zonedata.c: tonezone: Add Macao,China to tone zone data Adding
	  Macao tone zone data according to
	  http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf (closes
	  issue #17744) Reported by: alfredtang Patches: zonedata.patch
	  uploaded by alfredtang (license 1094) Merged revisions 9313 via
	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk

2010-08-31 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.4.0 released.

2010-08-31 16:12 +0000 [r9220]  Kinsey Moore <kmoore@digium.com>

	* ppp/dahdi.c: PPP: Fix an incorrect function call that was causing
	  dahdi.so to fail to load

2010-08-18 13:49 +0000 [r9159]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen.pm: DAHDI-perl: Config (sort
	  of) for dynamic channels Generate some sort of configuration for
	  dynamic channels. Usable enough for testing.

2010-08-18 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.4.0-rc1 released.

2010-08-13 18:40 +0000 [r9133]  Shaun Ruffell <sruffell@digium.com>

	* dahdi_scan.c: dahdi_scan: Use 'linecompat' to identify digital
	  spans. This fixes the case where the BRI spans on the Hx8 cards
	  were displayed as analog spans.

2010-08-03 12:14 +0000 [r9079]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm,
	  xpp/perl_modules/Dahdi/Chans.pm: dahdi-perl: also detect Aligera
	  cards (closes issue #17783) Reported by: frawd Patches:
	  dahdi-tools_aligera.patch uploaded by frawd (license 610)

2010-08-01 22:39 +0000 [r9076]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_scan.c, dahdi_maint.c: fix build of dahdi_scan and
	  dahdi_maint with -linux 2.3 New functionality that was added in
	  r8992 and r8993 uses new items defined only in dahdi-linux trunk
	  (and eventually: 2.4). As in both cases it's a single place to
	  check, we'll just ifdef it away.

2010-07-30 15:28 +0000 [r9066-9067]  Kinsey Moore <kmoore@digium.com>

	* dahdi_cfg.c: dahdi_cfg: Display more appropriate error messages
	  when an invalid signaling is chosen along with suggestions on how
	  to fix the problem.

	* xpp/perl_modules/Dahdi/Chans.pm: perl: make sure the channel
	  parser recognizes "Reserved" for unusable channels and fix a bug
	  preventing E&M-E1 from being detected properly

2010-07-28 12:30 +0000 [r9031]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/twinstar: twinstar: err on an invalid command.

2010-07-26 18:56 +0000 [r8991-8994]  Russ Meyerriecks <rmeyerreicks@digium.com>

	* dahdi_scan.c: Removed no longer existing alarm condition

	* dahdi_scan.c: Modified dahdi_sync to report detailed alarms

	* dahdi_maint.c: wip: dahdi_maint can now trip the alarm sim

	* dahdi_maint.c: dahdi_maint: Fixed outdated usage text

2010-07-22 11:41 +0000 [r8964]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader: increase maximal firmware delay to 15 seconds
	  Hmm... how badly congested can the startup of Centos be?

2010-07-21 08:47 +0000 [r8948-8954]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hexload.8, xpp/astribank_tool.8,
	  xpp/astribank_allow.8: More hyphen/minus fixes.

	* xpp/xpp_fxloader: xpp_fxloader: replace a sleep with a sleep loop
	  For newer kernels there's no need to sleep at all. For Centos5
	  systems there seems to be a need for a large sleep for firmware
	  load at boot time. So let's make it a loop.

	* xpp/README.Astribank: README.Astribank: new VMWI settings

2010-07-14 10:58 +0000 [r8923-8924]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen.pm: dahdi_genconf: better error
	  message for a bad generator module

	* xpp/perl_modules/Dahdi/Span.pm, xpp/genconf_parameters: Allow
	  using CONNECTOR/LABEL in genconf_parameters Allow using
	  CONNECTOR/LABEL in addition to SPAN and NUM for pri_termtype in
	  genconf_parameters

2010-07-06 17:52 +0000 [r8854]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Extra PCI IDs for
	  Junghanns PCI-E card (dahdi-perl)

2010-06-29 15:21 +0000 [r8827]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_tool.c: dahdi_tool: center span window as well. If your
	  window was larger than 80X25, you got a main "window" in the
	  center and the span one in the corner. This puts the span one in
	  the center as well.

2010-06-15 15:44 +0000 [r8777]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_cfg.c: Convert all '%i' to '%d' in dahdi_cfg Various values
	  in system.conf were parsed using %i. This means that a value with
	  a leading 0x was considered hexadecimal and a value with a
	  leading 0 would be considered octal ('030' == '24' == '0x1E').
	  This was never documented and seems a potential cause for
	  confusion in case a leading zero sneaks in. It is thus removed.

2010-06-03 20:56 +0000 [r8746]  Doug Bailey <dbailey@digium.com>

	* patlooptest.c: Add enhanced command line parsing and add more
	  options into how errors are flagged and what is displayed. Still
	  runs with the old usage: patlooptest <dahdi device> [<timeout>]

2010-06-02 17:05 +0000 [r8741]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: An extra PCI ID for an
	  OpenVox card I ran into.

2010-05-20 13:10 +0000 [r8670]  Sean Bright <sean@malleable.com>

	* /, xpp: Add dahdi_maint and xpp/twinstar.8 to svn:ignore

2010-05-17 13:26 +0000 [r8630-8638]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, xpp/waitfor_xpds, xpp/astribank_hook: Fix bashism (Raphael
	  Geissert, checkbashism)

	* xpp/perl_modules/Dahdi/Hardware/USB.pm: A more correct way to
	  pass parameters

2010-05-09 14:09 +0000 [r8615]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_cfg.c: Remove duplicate code: rad_apply_channels
	  rad_apply_channels() was the same as apply_channels()

2010-05-04 15:33 +0000 [r8606]  Kevin P. Fleming <kpfleming@digium.com>

	* dahdi_cfg.c: Report correct span number in dahdi_cfg verbose
	  output. When the DAHDI configuration file does not configure
	  every single span in the system, but leaves spans unconfigured,
	  the verbose output from dahdi_cfg would show incorrect span
	  numbers when reporting the line configuration, as it printed the
	  index into the array of configured spans, instead of their actual
	  span numbers.

2010-05-03 13:54 +0000 [r8589]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader: xpp_fxloader: make sure 1163 is not missed.

2010-04-29 15:06 +0000 [r8580]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader: Load xpp firmware in the background (udev) Move
	  loading the the xpp firmwares (when called from udev) to a
	  background sub-process. This helps with: * Don't block udev * It
	  seems that with older systems (e.g. CentOS 5) we need to wait a
	  bit for the device file to appear (in one of the upcoming udev
	  events). If we keep blocking udev, we won't have the device file.
	  The 'sleep' does not seem to be required for newer systems (e.g.
	  Debian Lenny).

2010-04-22 09:55 +0000 [r8547]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/Makefile: astribank_is_starting does not depend on libusb.

2010-04-18 12:52 +0000 [r8529-8535]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi.init: Add proper dependencies to the 'stop' action as well.

	* doc/pattest.8, xpp/dahdi_genconf, xpp/astribank_is_starting.8,
	  doc/dahdi_cfg.8, doc/dahdi_test.8, doc/fxotune.8,
	  doc/dahdi_diag.8, doc/dahdi_scan.8, doc/patgen.8,
	  doc/dahdi_monitor.8: man pages: hyphen to minus Groff considers
	  '-' a hyphen. If we want a minus (or a dash) we need to use '\-'.

2010-04-14 14:55 +0000 [r8520]  Kinsey Moore <kmoore@digium.com>

	* system.conf.sample: Add documentation for e&me1 (E&M over E1
	  lines).

2010-04-12 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.3.0 released.

2010-04-12 20:18 +0000 [r8503-8508]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/USB.pm: Also detect USB devices
	  connected on a hub.

	* xpp/perl_modules/Dahdi/Span.pm: Also detect type for Sangoma
	  E1/T1 cards.

2010-04-01 15:45 +0000 [r8451]  Shaun Ruffell <sruffell@digium.com>

	* Makefile: dahdi_maint: install dahdi_maint on 'make install'

2010-03-29 21:04 +0000 [r8444]  Kinsey Moore <kmoore@digium.com>

	* dahdi_maint.c: Add a space between words and correct an error
	  message.

2010-03-25 15:29 +0000 [r8422-8430]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: wcb4xxp - add Swyx 4xS0
	  SX2 QuadBri PCI IDs to dahdi-perl (issue #16493) Reported by:
	  nic_bellamy

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Some more wcb4xxp PCI IDs
	  for Junghanns cards (issue #15446) (issue #16447) Reported by:
	  lpistone Tested by: okrief

2010-03-23 13:41 +0000 Russ Meyerriecks <rmeyerriecks@digium.com>

	* dahdi-tools version 2.2.1.1 released.

2010-03-10 17:37 +0000 Russ Meyerriecks <rmeyerriecks@digium.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Added IDs for gen5 firmware

2010-01-11 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.2.1 released.

2010-01-10 15:39 +0000 [r7793-7829]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, xpp/README.Astribank: Another round of updates to
	  README.Astribank. zap->dahdi and others Merged revisions 7754 via
	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk

	* xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: only get
	  'serial' and 'devnum' attributes from Astribanks We can tell if a
	  device is an Astribank by the vendorId and productId attribute.
	  Get other attributed only after we give up on other devices.
	  (closes issue #16552) Merged revisions 7558 via svnmerge from
	  https://origsvn.digium.com/svn/dahdi/tools/trunk

	* /, xpp/xpp_fxloader: xpp_fxloader: adapt to newer kernels This
	  commit prepares xpp_fxloader to get hotplug envirnment from newer
	  kernel versions: * DEVICE will eventually be replaced with
	  DEVNAME. Accept both (and look at DEVNAME first). * If we get
	  DEVICE, we'll probably get an invalid path based at /proc/bus/usb
	  . Fix it to use /dev/bus/usb . * While we're at it, allow using
	  PRODUCT from the envirnment instead of from the command-line.
	  This should allow fixing udev rules but will also work with
	  existing rules in DAHDI-linux from trunk (for systems where they
	  are valid). Merged revisions 7752 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

	* /, xpp/waitfor_xpds, xpp/twinstar_hook, xpp/xpp_fxloader: xpp:
	  Comment-only changes: copyright, keywords Merged revisions 7463
	  via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk

	* /, xpp/twinstar: Add perldoc for twinstar. This also avoids a
	  bogus, empty twinstar.8 man page. Merged revisions 7219,7263 via
	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
	  ........ r7219 | tzafrir | 2009-09-27 13:49:40 +0200 (Sun, 27 Sep
	  2009) | 5 lines xpp: install twinstar by default; Add a man page
	  Add a man page to twinstar (as perl POD) and get it installed by
	  default. ........ r7263 | tzafrir | 2009-09-29 22:45:50 +0200
	  (Tue, 29 Sep 2009) | 2 lines xpp: fix a typo in documentation
	  ........

	* README, /: Fix README for asciidoc 8.5.2 Tweak title a bit to
	  avoid asciidoc consider it a header for a syntax block. Merged
	  revisions 7792 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

2009-12-15 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.2.1-rc2 released.

2009-12-01 13:14 +0000 [r7655]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/Makefile: Also install the twinstar tool on the system
	  Originaly part of trunk r7219.

2009-11-22 11:48 +0000 [r7621]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/astribank_hexload.c, xpp/perl_modules/Dahdi/Hardware/USB.pm,
	  xpp/mpp_funcs.c, xpp/astribank_tool.c, xpp/astribank_usb.h,
	  xpp/mpp_funcs.h, xpp/astribank_tool.8,
	  xpp/perl_modules/Dahdi/Xpp/Mpp.pm, xpp/mpp.h: xpp: MPP protocol
	  v.1.4 * New firmware loading protocol - Older one (1.3) is still
	  supported for now * Support loading firmwares from Astribanks
	  with a minimal firmware (1163) * astribank_tool -Q: always query,
	  regardless of verbosity level xpp rev: up to 7559 Merged
	  revisions 7609 via svnmerge from
	  https://origsvn.digium.com/svn/dahdi/tools/trunk

2009-11-19 23:11 +0000 [r7611]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader, xpp/astribank_tool.c: xpp: support loading
	  USB firmware into 1163 devices as well Demote some messages to
	  debug while we're at it. Merged revisions 7596 via svnmerge from
	  http://svn.digium.com/svn/dahdi/tools/trunk

2009-11-05 09:41 +0000 [r7466-7492]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_sync, xpp/perl_modules/Dahdi/Xpp/Xpd.pm: Use the
	  timing_priority attribute, if available, to provide more corrent
	  LED indiction and such. 

	* xpp: use xpd sysfs attr. timing_priority to set NT/TE 

	* dahdi.init, xpp/astribank_is_starting.c (added), 
	  xpp/waitfor_xpds, xpp/astribank_is_starting.8 (added),
	  xpp/twinstar_hook, xpp/xpp_fxloader, xpp/Makefile,
	  xpp/astribank_hook, init.conf.sample: Add optional "hotplug mode"
	  to init scripts The hotplug mode is only used in
	  XPP_HOTPLUG_DAHDI=yes is set in /etc/dahdi/init.conf . If it is
	  set and the system actually has Astribanks, most of the init
	  script will actually be run from the context of a udev event.

	* xpp: Add astribank_is_starting: astribank_is_running is used to
	  tell when we may have an Astribank that is initializing (and may
	  be re-enumerating and thus not listed as a device). It uses a
	  semaphore as we can always write to one and we can't always write
	  to a file. xpp: A man page for astribank_is_starting xpp rev: 7321 

	* dahdi.init: move module loading to a separate function Move the
	  module loading parts of the dahdi init script to a seperate
	  function - load_modules. To be used by a later commit. There is
	  not functional change here (but the diff is confusing). 

	* Add XPP_HOTPLUG_DAHDI mode: cfg initiated mostly from hotplug If
	  XPP_HOTPLUG_DAHDI=yes is set in /etc/dahdi/init.conf (which is
	  not the default), the normal run of the 'start' operation of the
	  dahdi init script will only be responsible for loading modules.
	  The rest will be done (if there are indeed Astribanks on the
	  system) by a second call to the init script once all of them have
	  connected. The astribank_hook has also been mostly rewritten.
	  Most of the functionality of twinstar_hook moved to it. The
	  current twinstar_hook is a simple example script.
	  XPP_HOTPLUG_DAHDI mode assumes that all Astribanks on the system
	  are listed in /etc/dahdi/xpp_order (which can be generated using,
	  e.g. 'dahdi_genconf xpporder') 

	* Fix XPP_HOTPLUG_DAHDI: logic; end of init.d script 'Hotplug mode'
	  was introduced in r7335. * The logic in the script was broken. -
	  Negative logic is not such a grand idea to start with. *
	  Interactive invocation of init.d ends when expected and not
	  sooner. This change makes waitfor_xpds wait longer. Rather than
	  waiting for all the Astribanks to load, it will now wait until
	  the initialization of dahdi from the Astribanks hook script is
	  run. This allows running e.g.: /etc/init.d/dahdi start;
	  /etc/init.d/asterisk start It also means that
	  'astribank_is_starting' is actually used as a semaphore and not
	  only as stamp file. As before, those changes have no effect if
	  hotplug mode is not explicitly enabled (setting
	  'XPP_HOTPLUG_DAHDI=yes' in init.conf). 

	* xpp: make astribank_is_starting build without warnings.
	  autoconfig.h is needed as semtimedop() requires _GNU_SOURCE. xpp
	  rev: 7471

	* xpp/perl_modules/Dahdi/Config/Params.pm,
	  xpp/perl_modules/Dahdi/Config/Gen.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/System.pm,
	  xpp/genconf_parameters: CAS DAHD/Asterisk configuration
	  generation support Also support generating (open)R2 config in
	  chan_dahdi.conf, while we're at it. Default configuration remains
	  ISDN as before if no extra settings are given in
	  genconf_parameters. 
	  

	* dahdi-perl: chan_dahdi.conf generator can generate openr2 conf If
	  configured to use R2 ("pri_connection_type R2" in
	  genconf_parameters), the chandahdi generator of dahdi_genconf
	  will now generate configuration for the openr2 support in
	  chan_dahdi. 

	* xpp: Dahdi::Config::Gen.pm: improvements in preperation for
	  T1-CAS: - New channo_range() method which returns range strings
	  for any list of channel numbers (handle sorting, validation,
	  etc.) - Reimplement bchan_range() as a small wrapper around
	  channo_range(). - Another small wrapper is chan_range() that
	  works on channel objects. - Also a parse_chan_range() does the
	  reverse (from range string to a list of channel numbers). This
	  isn't used at the moment. xpp rev: 7306 

	* dahdi-perl: Add basic T1-CAS support for dahdi_genconf - Support
	  added in generators of system.conf and of chan_dahdi.conf . -
	  Some strange asumptions about being FXS/FXO depending on being
	  timing provider/supplier. - New gen_cas() method for Chandahdi
	  and System. - Now gen_digital() is a bit cleaner. - Call
	  gen_cas(), gen_openr2(), gen_digital() according to the
	  'pri_connection_type' config (CAS, R2, PRI/BRI). xpp rev: 7307
	  

	* dahdi_perl: improved config generation for T1 CAS A few extra
	  options for a CAS span signalling. xpp rev: 7343, 7346, 7369 

	* xpp: reduce the clutter of firmware loading Make the new XPP
	  tools much less verbose: * demote messages to be debug * Convert
	  multi-line messages to be single-line messages Making
	  xpp_fxloader run in debug mode can be done by setting DEBUG=yes
	  in /etc/dahdi/init.conf. 

	* dahdi-perl fixes, mostly xpp-specific. * Fix pattern for PCI BRI
	  cards * Fix recognizing xpp devices by @connector in xpp_order *
	  Print more helpful comments in xpp_order * Remove most (if not
	  all) need of /proc/bus/usb * Handle other similar "is_twinstar"
	  errors.

	* dahdi_genconf: xpp_order generator: Extra '#' after connector
	  comment Add an extra '#' right after the connector string to make
	  it simpler to use the connector string from the generated
	  xpp_order. xpp rev: 7292 

	* xpp: make /proc/bus/usb/devices optional Get the information we
	  read from /proc/bus/usb/devices from /sys/bus/usb/devices .
	  Tested on my Debian Unstable with 2.6.30 kernel. The default is
	  still /proc/bus/usb and sysfs is only used if the procfs file is
	  not found. Also fixes a case of using the sysfs attribute busnum,
	  that does not exist in kernel 2.6.9 . Devise the bus number from
	  the name of the node. 

	* dahdi-perl: Avoid '"is_twinstar" on unblessed reference' Dpn't
	  panic if a device is not found in the list of hardware. This is
	  not only indication of a bug, but can also happen if a device
	  appeared after the script was started. 

	* zonedata.c: zonedata: Add tone definitions for Panama. (closes
	  issue #14832) Reported by: jlduran Patch by: jldruan

	* Pass correct channel number to DAHDI_GET_PARAMS when passing span
	  numbers to dahdi_scan. When filtering, we weren't taking into
	  account the number of channels in the spans that we were
	  skipping. (closes issue #15553) Reported by: tony Patches:
	  20090723_issue15553.patch uploaded by seanbright (license 71)
	  Tested by: seanbright 

	* xpp: cleanup gcc warnings and one real astribank_tool bug xpp
	  rev: 7281 

	* Add a missing trailing slash on the install-libs target (closes
	  issue #15793) Reported by: pprindeville Patches:
	  dahdi-tools-makefile.patch uploaded by pprindeville (license 347) 

	* dahdi_genconf: Add the TC400P transcoder card to our hardware
	  list (seanbright) 

2009-06-08 17:02 +0000 [r6677-6678]  Sean Bright <sean.bright@gmail.com>

	* dahdi-tools version 2.2.0 released.

	* Makefile: Since this 'echo' is part of a larger statement, we
	  don't need the @ symbol. Cleans up an error I am seeing on
	  Ubuntu.

	* Makefile: Get rid of parallel build warnings from GNU make.

2009-05-28 14:04 +0000 [r6668]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/waitfor_xpds: xpp: if $dahdi_hardware is empty, don't use it
	  in an error message

2009-05-27 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.2.0-rc3 released.

2009-05-26 09:55 +0000 [r6655-6657]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Reword the message after 'make config' for the case no
	  hardware found Check the output of dahdi_hardware and give a
	  different message for the case it found no hardware. (closes
	  issue #14792) Reported by: Dovid Patches:
	  dahdi_hardware_nodev_make.diff uploaded by tzafrir (license 46)

	* xpp/waitfor_xpds: Properly fix usage of waitfor_xpds in
	  non-standard settings. From xpp rev. 7137.

2009-05-19 16:46 +0000 [r6643-6647]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Params.pm, xpp/dahdi_genconf,
	  xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/System.pm,
	  xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/genconf_parameters:
	  dahdi-perl: make dahdi_genconf default to hardhdlc
	  dahdi_genconf's 'bri_hardhdlc' parameter changes. Should
	  generally work with no need for manual configuration unless you
	  use a bristuffed driver (zaphfc, qozap). See notes in
	  genconf_parameters.

	* xpp/waitfor_xpds, dahdi.init: dahdi.init: moved test for
	  astribanks into waitfor_xpds If the system starts with an
	  Astribank with no firmware, the firmware loading may take a while
	  and the Astribank only becomes ready some time after the DAHDI
	  init script starts. This means that the test at the beginning of
	  xpp_startup() in dahdi.init fails to find an Astribank, and the
	  init script simply continues ignoring this. This changeset moves
	  the testing inside the script waitfor_xpds. The script now: 1.
	  Tests for an Astribank using dahdi_hardware and exists
	  immediately if none found. 2. A loop (of maximum 10 seconds)
	  waits for the first Astribank to be detected by the driver. 3.
	  Waiting for the initialization of all the Astribanks to complete
	  (The original waitfor_xpds) The support for the old procfs
	  iinterface has been removed, as it has never been used with
	  DAHDI.

	* xpp/Makefile, xpp/astribank_tool.8, xpp/astribank_allow.8
	  (added): xpp: install astribank_allow As we install it, we need a
	  matching man page.

2009-05-17 12:01 +0000 [r6630-6632]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen/Users.pm: A closer-to-reality
	  users.conf generation module

	* xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm,
	  xpp/perl_modules/Dahdi/Xpp/Mpp.pm, xpp/genconf_parameters: Fix
	  typos in xpp documentation

2009-05-14 14:02 +0000 [r6619]  Shaun Ruffell <sruffell@digium.com>

	* dahdi_cfg.c: dahdi_cfg: Default to the us tonezone if not
	  specified in system.conf. If there are not "loadzone" and
	  "defaultzone" lines in /etc/dahdi/system.conf, default to the us
	  zone. This mimics the behavior of older zaptel releases.
	  DAHDI-29.

2009-05-13 20:18 +0000 [r6613-6617]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/mpp_funcs.c, xpp/astribank_tool.c: astribank_tool: Support
	  'reset' of pre-MPP protocol as fallback As of USB firmware rev.
	  6926, the Astribank control connection protocol has changed in an
	  incompatible manner. If astribank_tool fails to open a device
	  when running a reset command, try to reset the device with the
	  command from the old (pre-MPP) protocol (A single 0x20 byte). No
	  support whatsoever for any other feature of the old protocol.
	  From xpp rev. 7067. (previous commit was xpp rev. 7066).

	* xpp/mpp_funcs.c: xpp: better error reporting when failing to talk
	  to a pre-MPP Astribank.

	* xpp/perl_modules/Dahdi/Chans.pm, xpp/perl_modules/Dahdi/Span.pm:
	  dahdi-perl: Patterns for Rhino E1/T1 cards.

2009-05-12 07:50 +0000 [r6601-6603]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/README.Astribank: A few more chan_zap -> chan_dahdi in
	  README.Astribank .

	* xpp/perl_modules/Dahdi/Chans.pm: DAHDI-perl: Fix detection of
	  empty slots in Rhino cards.

2009-05-09 06:33 +0000 [r6579-6585]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/README.Astribank: Fix a broken link

	* xpp/README.Astribank: documentation updates: xpp_order, new USB
	  loading, and more

	* xpp/perl_modules/Dahdi.pm: dahdi-perl: scan only "number" files
	  under /proc . (In case someone, such as dahdi_dynamic_ethmf adds
	  there some other entries)

2009-04-29 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.2.0-rc2 released.

2009-04-27 19:45 +0000 [r6512]  Kevin P. Fleming <kpfleming@digium.com>

	* configure, acinclude.m4: incorporate the autoconf 2.63 fixes here
	  too

2009-04-26 10:29 +0000 [r6492]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, xpp/xpp_order (removed): Remove useless sample file The
	  sample xpp_order will be generated anyway when running
	  'dahdi_genconf xpporder' (see
	  xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm) . No need to
	  clutter the main DAHDI installation with it.

2009-04-23 17:03 +0000 [r6476]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, xpp/xpp_order: xpp: xpp_order is another config file
	  that should go to /etc/dahdi Also slightly fix the sample config.

2009-04-22 10:25 +0000 [r6427-6442]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi.init: make sure '/etc/init.d/dahdi stop' ends with a
	  newline

	* ppp/dahdi.c: Yet another left-over DAHDI_PARAMS. ppp almost
	  builds

	* xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm:
	  Dahdi::Config::Gen::Xpporder: use number rather than object in
	  warning

2009-04-21 13:44 +0000 [r6419-6421]  Sean Bright <sean.bright@gmail.com>

	* dahdi_monitor.c: Correct error check for fopen() calls in
	  dahdi_monitor.c. dahdi_monitor.c was checking for an error
	  calling fopen() by determining if the return value was less than
	  0. fopen(), however, returns a FILE * and returns NULL on
	  failure. (closes issue #14894) Reported by:
	  gknispel_proformatique Patches:
	  dahdi_monitor_fix_check_fopen_result.patch uploaded by gknispel
	  (license 261)

	* dahdi_monitor.c: Use correct return value type for getopt(). In
	  dahdi_monitor.c, the return value of getopt() was being assigned
	  to a char while the function actually returns an int. Fix
	  suggested by reporter. (closes issue #14893) Reported by:
	  gknispel_proformatique

	* dahdi_monitor.c: Whitespace and coding guidelines changes

2009-04-20 13:44 +0000 [r6417]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_hardware, xpp/perl_modules/Dahdi/Xpp/Xbus.pm,
	  xpp/test_parse.c, xpp/twinstar, xpp/twinstar_hook,
	  xpp/twinstar_setup, xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm
	  (added), xpp/perl_modules/Dahdi/Xpp/Mpp.pm: xpp: twinstar-related
	  perl improvements * New generator Dahdi::Config::Gen::Xpporder
	  can generate and xpp_order config for an existing setup. * Add
	  more TwinStar related logic to Dahdi::Xpp::Mpp. Simplifies the
	  twinstar utility accordingly. * twinstar_hook: for the multiple
	  Astribanks case. * twinstar_setup: More logic tests. Now
	  delegates configuration generation to dahdi_genconf (with new
	  Xpporder generator). * dahdi_hardware: Show number of channels
	  with -v

2009-04-16 17:32 +0000 [r6375]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_fxloader: xpp_fxloader: exit properly when run with
	  incorrect argument

2009-04-10 09:53 +0000 [r6344]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/Makefile, xpp/astribank_hook (added): Move astribank_hook
	  from linux to tools. Install it by default

2009-04-07 08:13 +0000 [r6337]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/hexfile.c: hexfile.c was accidentally left out of r6313

2009-04-02 20:56 +0000 [r6278-6313]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/pic_loader.h (added), xpp/astribank_hexload.8 (added),
	  xpp/twinstar_setup (added), xpp/xpp_fxloader,
	  xpp/astribank_tool.c (added), xpp/astribank_allow.c (added), xpp,
	  xpp/xpp_sync, xpp/dahdi_genconf, xpp/twinstar (added),
	  xpp/mpp_funcs.c (added), xpp/Makefile, xpp/mpp_funcs.h (added),
	  xpp/astribank_tool.8 (added), xpp/perl_modules/Dahdi/Xpp/Mpp.pm
	  (added), xpp/astribank_upgrade (added),
	  xpp/perl_modules/Dahdi/Xpp.pm,
	  xpp/perl_modules/Dahdi/Hardware/PCI.pm, xpp/dahdi_hardware,
	  xpp/twinstar_hook (added), xpp/xpp_order (added),
	  xpp/astribank_hexload.c (added), xpp/dahdi_registration,
	  xpp/perl_modules/Dahdi/Hardware/USB.pm,
	  xpp/perl_modules/Dahdi/Xpp/Xbus.pm, xpp/debug.c (added),
	  xpp/dahdi_drivers, xpp/lsdahdi, xpp/astribank_usb.c (added),
	  xpp/hexfile.h, xpp/perl_modules/Dahdi/Hardware.pm, xpp/debug.h
	  (added), xpp/astribank_usb.h (added),
	  xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/mpp.h (added),
	  xpp/pic_loader.c (added): Support for Astribanks 116x: tools part
	  * New USB firmware loading mechanism. - Incompatible with
	  previous one: upgrade using fxload or hard reset -
	  astribank_hexload is the new low-level loading tool - fpga_load
	  remains for backward compatibility. - xpp/astribank_upgrade:
	  automate upgrading using fxload * Much enhanced control protocol
	  ("MPP") - astribank_tool is the low-level tool for that. *
	  Support for the TwinStar (dual USB port) - Managed through
	  astribank_tool - Wrapper perl modules and scripts provided *
	  Allow explicit ordering of Astribanks - /etc/dahdi/xpp_order -
	  explicit order of Astribanks on the system - The default sorter
	  is now to use those and fall back to connectors (previous
	  default). - An option to dahdi_registration to change sorting.

	* hdlcstress.c: hdlcstress.c: add option -b not to stress BRI too
	  much Aparantly the HFC chip can't stand the heat of this test.
	  Let's give it an occasional rest. Also add getopts support.

	* Makefile: Install genconf_parameters on 'make install' as well

	* blacklist.sample: xpp_usb should not be blacklisted: it does not
	  register automatically anyway.

	* xpp/perl_modules/Dahdi/Config/Gen/Modules.pm (added): Implement
	  'dahdi_genconf modules' (generate /etc/dahdi/modules)

2009-03-29 18:53 +0000 [r6272]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen.pm: dahdi_genconf: Set the
	  context same as groups.

2009-03-26 18:28 +0000 [r6261]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* doc/dahdi_scan.8: s/zap/dahdi/ again in dahd_scan.8

2009-03-26 18:02 +0000 [r6259]  Kevin P. Fleming <kpfleming@digium.com>

	* dahdi_cfg.c: when /etc/dahdi/system.conf does not have an echo
	  canceller defined for a channel, but the channel previously had
	  one assigned, running dahdi_cfg does not remove the assigned echo
	  canceller from the channel as it should. this commit changes that
	  behavior, so that every channel with a defined signaling mode is
	  updated to have the proper (or no) echo canceller assigned.

2009-03-22 10:31 +0000 [r6215]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/Gen/Users.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/System.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/Unicall.pm: dahdi-perl: "allow"
	  hand-editing of generated files Rework the text added by
	  dahdi_genconf generators to say that you can hand-edit files. But
	  just don't complain if they get mysteriously overriden when it is
	  run again :-) (closes issue #14569) Reported by: jtodd

2009-03-17 17:07 +0000 [r6189]  Jason Parker <jparker@digium.com>

	* dahdi_monitor.c: Remove remnants of -p option, since it no longer
	  exists.

2009-03-17 13:52 +0000 [r6187]  Russell Bryant <russell@digium.com>

	* zonedata.c: Add tone definitions for Turkey. (closes issue
	  #10450) Reported by: msahinbas

2009-03-17 09:10 +0000 [r6167-6185]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Use LIBS instead of LDFLAGS directly in tools Makefile
	  The Makefile of dahdi-tools set the variable LDFLAGS directly,
	  rather than adding to LIBS. This does not allow placing LIBS
	  after all the linked objects. (closes issue #14638) Reported by:
	  Chainsaw Patches: dahdi-tools-2.1.0.2-asneeded.patch uploaded by
	  Chainsaw (license 723)

	* xpp/README.Astribank, xpp/xpp_sync, dahdi.init: dahdi.init: call
	  xpp_sync a bit later. xpp_sync needs to only be called after
	  dahdi_cfg was run, because the application of system.conf may
	  change the priority of a PRI module span (If it is a sync
	  provider, "NT", priority is lower). Also some documentation-only
	  changes for xpp_sync.

2009-03-09 16:30 +0000 [r6110]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Chans.pm: Fix detection of channels of
	  dynamic spans in Dahdi::Chans Fix the pattern detection of
	  channels belonging to dynamic (dahdi_dynamic) spans in perl
	  programs that use Dahdi::Chans (e.g.: lsdahdi) (closes issue
	  #14630) Reported by: tamiel Patches:
	  20090309-perl5-Dahdi-Chans.diff uploaded by tamiel (license 712)

2009-03-07 00:10 +0000 [r6107]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Chans.pm,
	  xpp/perl_modules/Dahdi/Hardware/USB.pm: Detect Sangoma USB FXO
	  device; fix detection of Sangoma DAHDI channels (By Alessandro
	  Zummo)

2009-03-05 21:10 +0000 [r6095]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi.init: Fix a typo in shutting down dynamic spans in
	  dahdi.init Fixes shutdown_dynamic() in the dahdi init.d script.
	  Not enabling it by default just yet (the second half of the
	  patch) until we get some further confirmation that such a
	  shutdown is always good. (from issue #14603) Reported by: tamiel
	  Patches: 20090304_dahdi.init.patch uploaded by tamiel (license
	  712)

2009-03-03 20:39 +0000 [r6071-6078]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, README, /: Include sample genconf_parameters in
	  dahdi-tools README.

	* xpp/perl_modules/Dahdi/Config/Params.pm,
	  xpp/perl_modules/Dahdi/Config/Gen.pm, xpp/genconf_parameters:
	  genconf_parameters: Add option fxo_default_start; Document
	  genconf_parameters * Add a dqahdi_genconf option
	  fxo_default_start, equivalent of fxs_default_start. * Set all
	  trunks in group 'group_lines' rather than hard-coded 0 (for TE)
	  and 6 (for NT). * Document all parameters in genconf_parameters.

	* xpp/perl_modules/Dahdi/Config/Params.pm (added),
	  xpp/dahdi_genconf, xpp/perl_modules/Dahdi/Config/Gen.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/Users.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/System.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/Unicall.pm: dahdi_genconf:
	  configuration handling cleanup. * Parsing genconf_parameters is
	  now in Dahdi::Config::Params All hard-coded defaults are there
	  too (in the item() method). * Dahdi::Config::Genconf is gone
	  (merged into Dahdi::Config::Gen) All semantic mapping is in the
	  constructor. * dahdi_genconf is now lean and mean. * Add some
	  implementation docs into these files.

	* xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi-perl: Do
	  generate 'echocanceller' in system.conf Fixed a regression from
	  r6013 .

	* xpp/perl_modules/Dahdi/Config/GenconfDefaults.pm (removed):
	  dahdi-perl: Remove an obsolete and unused module
	  GenconfDefaults.pm

	* xpp/README.Astribank: README.Astribank: Killed one remaining
	  /sys/devices/xpp

2009-03-01 14:29 +0000 [r6054-6058]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/README.Astribank: More README updates

	* xpp/perl_modules/Dahdi/Xpp/Xbus.pm, xpp/dahdi_genconf,
	  xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
	  xpp/perl_modules/Dahdi/Xpp/Xpd.pm: xpp-dahdi: freepbx code
	  generation; better procfs compatibility * dahdi_genconf -F will
	  generate chan_dahdi.conf for freepbx (like genzaptelconf -F) *
	  Better procfs compatibility for xpp modules.

	* xpp/dahdi_drivers,
	  xpp/perl_modules/Dahdi/Config/GenconfDefaults.pm,
	  xpp/perl_modules/Dahdi/Config/Gen.pm,
	  xpp/perl_modules/Dahdi/Config/Gen/Users.pm: dahdi-perl: more
	  defensive coding and some docs

	* xpp/perl_modules/Dahdi.pm: Dahdi.pm: the sample code should
	  actually work.

	* xpp/fpga_load.c: fpga_load.c: Flush USB device buffer on startup.
	  Fixes some firmware loading issues.

2009-02-26 15:41 +0000 [r6041-6043]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Add PCI IDs of another
	  HFC-S card that zaphfc can handle.

	* xpp/perl_modules/Dahdi/Chans.pm: Fix a typo for detecting zaphfc.

2009-02-18 21:20 +0000 [r6022]  Doug Bailey <dbailey@digium.com>

	* fxstest.c: Remove 8 bit restriction on setting indirect registers
	  (closes issue #14323) Reported by: alecdavis Patches:
	  fxstest_setindirect.diff.txt uploaded by alecdavis (license 585)
	  Tested by: alecdavis

2009-02-13 21:09 +0000 [r6013]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_genconf, xpp/perl_modules/Dahdi/Config/Gen.pm (added),
	  xpp/perl_modules/Dahdi/Config/Gen/Users.pm (added),
	  xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm (added),
	  xpp/perl_modules/Dahdi/Config/Gen/System.pm (added),
	  xpp/perl_modules/Dahdi/Config/Gen (added),
	  xpp/perl_modules/Dahdi/Config/Gen/Unicall.pm (added): Rework
	  dahdi_genconf to have separate configuration generation modules.
	  'dahdi_genconf foo bar' will use the modules
	  Dahdi::Config::Gen::Foo and Dahdi::Config::Gen::Bar to generate
	  configuraion files. Extra formats can thus be added without
	  modifying dahdi_genconf and independently of DAHDI.

2009-02-08 11:04 +0000 [r5984]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_genconf: dahdi_genconf: do reset default files list
	  when command-line has files This fixes a regression that was
	  added whwn handling of R2 was added. Originally: Xorcom rev 6683.

2009-01-28 18:49 +0000 [r5886]  Shaun Ruffell <sruffell@digium.com>

	* dahdi.init: Use the dahdihpec_enable tool instead of the
	  zaphpec_enable. Issue: DAHDI-233 patch by: cmoye

2009-01-27 15:14 +0000 [r5827]  Doug Bailey <dbailey@digium.com>

	* fxstest.c: Break VMWI ioctl calls into two separate calls to
	  maintain old revision compatibility (issue #14104) Reported by:
	  alecdavis Tested by: dbailey

2009-01-25 00:50 +0000 [r5808-5809]  Sean Bright <sean.bright@gmail.com>

	* dahdi.init: Use the debian commands on Gentoo. (closes issue
	  #14277) Reported by: darren1713 Patches: dahdi.init.txt uploaded
	  by darren1713 (license 116)

2009-01-22 15:45 +0000 [r5800]  Doug Bailey <dbailey@digium.com>

	* fxstest.c: Alec Davis change to modify vmwi test to use new ioctl
	  call structure and enhance functionality (issue #14104) Reported
	  by: alecdavis Patches: mwiioctl_structure_fxstest.diff.txt
	  uploaded by dbailey (license ) Tested by: alecdavis, dbailey

2009-01-20 18:54 +0000 [r5768]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_genconf: dahdi_genconf: Finally set $fxs_default_start
	  = 'ks' rather than 'ls'

2009-01-19 15:19 +0000 [r5728]  Doug Bailey <dbailey@digium.com>

	* fxstest.c: Add test to excercise VMWI Enhance polarity test by
	  making sure the line is in an active state before testing (issue
	  #14104) Reported by: alecdavis Patches: dahditools-14104.diff.txt
	  uploaded by dbailey (license ) Tested by: alecdavis

2009-01-19 12:46 +0000 [r5705-5707]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: dahdi-tools: Delete test binaries on 'make clean'

	* xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/xpp_sync: xpp_sync xpd
	  order fix.

	* xpp/perl_modules/Dahdi/Span.pm: Dahdi-perl: Do detect Astribank
	  PRI modules.

2009-01-18 10:22 +0000 [r5671]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Xpp/Xbus.pm,
	  xpp/perl_modules/Dahdi/Chans.pm,
	  xpp/perl_modules/Dahdi/Xpp/Line.pm,
	  xpp/perl_modules/Dahdi/Span.pm,
	  xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/xpp_sync,
	  xpp/perl_modules/Dahdi/Xpp.pm: XPP tool updates to match r5663:
	  sysfs migration.

2009-01-16 14:18 +0000 [r5662]  Sean Bright <sean.bright@gmail.com>

	* configure, configure.ac: Properly detect GENERIC_HDLC_VERSION on
	  various kernel versions. (closes issue #14150) Reported by:
	  ccesario Patches: 20090115__bug14150.diff.txt uploaded by
	  seanbright (license 71) Tested by: ccesario

2009-01-15 12:47 +0000 [r5661]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_genconf: Add an extra output format, 'asterisk': make
	  the configuration readable for an Asterisk configuration parser.

2009-01-14 20:06 +0000 [r5656-5660]  Sean Bright <sean.bright@gmail.com>

	* hdlctest.c: Whitespace and coding guidelines changes only.

	* hdlctest.c: Fix some uninitialized variable warnings that were
	  causing hdlctest to not compile. Tested the program as well and
	  it appears to work correctly. (closes issue #13906) Reported by:
	  tzafrir

	* dahdi_monitor.c: This commit deserves no comment.

	* dahdi_monitor.c: The problem with using dahdi_copy_string here is
	  that it is guaranteed to NULL terminate the destination string,
	  which in this case was not correct. So revert back to using
	  strncpy and also decrease the buffer by 1 since it was reserving
	  an extra byte behind NULL for some reason. Fix suggested by
	  reporter. (closes issue #14103) Reported by: gork

2009-01-06 08:09 +0000 [r5643]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: d00d must be in small
	  caps

2009-01-03 21:14 +0000 [r5626]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Span.pm: Dahdi::Span: Remove an
	  over-general span header "pri" pattern. Should fix #14061 .

2008-12-16 17:02 +0000 [r5555]  Doug Bailey <dbailey@digium.com>

	* fxotune.c: Add ability to use sine tables for systems that don't
	  have efficient floating point Add the ability to print out the
	  best results found during tuning Some format cleanup

2008-12-15 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.1.0.2 released.

2008-12-15 20:19 +0000 [r5533]  Shaun Ruffell <sruffell@digium.com>

	* Makefile: Overwrite the libtonezone.so.1.0 and libtonezone.so.1
	  links and libraries in order to maintain binary compatibility
	  with applications linked with dahdi-tools 2.0.0.

2008-12-15 11:19 +0000 [r5530-5532]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/README.Astribank: README.Astribank: minor formatting fix.

	* xpp/README.Astribank: Document patching the xpp BRI driver for
	  now.

	* dahdi_cfg.c: Allow the span timing to be up to 255. The test for
	  15 was ineffective anyway. Some drivers can use higher values.
	  See issue #13954 .

2008-12-11 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.1.0.1 released.

2008-12-11 22:45 +0000 [r5514]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi.init: Drop the "redhat" action at the 'stop' case for now:
	  RHEL4's 'action' only works with programs and not with functions.

2008-12-09 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.1.0 released.

2008-12-09 19:41 +0000 [r5461]  Shaun Ruffell <sruffell@digium.com>

	* modules.sample: Adding the wctc4xxp driver to the modules.sample.

2008-12-08 14:02 +0000 [r5452]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Span.pm: Fix detection of the B410P card.
	  All ports will be reported as TE. Tested by write_erase on
	  #asterisk-dev.

2008-12-05 00:24 +0000 [r5432-5440]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi_genconf: dahdi_genconf: add output type 'modules'
	  (/etc/dahdi/modules) Also improved documentation.

	* xpp/README.Astribank: A minor formatting fix.

2008-12-01 18:41 +0000 [r5409-5426]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/README.Astribank: Next README.Astribank revision: Devices are
	  not under the bun. (And various other fixes)

	* xpp/README.Astribank: README.Astribank catching up with sysfs,
	  dahdi and all. Many more entries in the table of contents. Most
	  of sysfs is documented.

2008-11-27 10:01 +0000 [r5402-5404]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, /: dahdi-tools: Re-add README.Astribank.html
	  generation.

	* xpp/README.Astribank (added): Moving README.Astribank to
	  dahdi-tools .

2008-11-25 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.1.0-rc5 released.

2008-11-24 20:42 +0000 [r5379-5381]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_cfg.c: dahdi_cfg: {} as per coding guidelines.

	* dahdi_cfg.c: dahdi_cfg: Make the message about echo canceller
	  selection verbose.

	* xpp/waitfor_xpds, xpp/test_parse.c, xpp/xpp_fxloader,
	  xpp/fpga_load.c: Add some missing copyright statements in the
	  xpp/ directory as well.

2008-11-21 23:26 +0000 [r5365-5366]  Kevin P. Fleming <kpfleming@digium.com>

	* dahdi_diag.c, hdlcstress.c, patgen.c, patlooptest.c,
	  hdlcverify.c, fxstest.c, timertest.c, hdlcgen.c, pattest.c,
	  dahdi_test.c, dahdi_speed.c, hdlctest.c: add copyright headers to
	  all the files that don't have them

	* dahdi_monitor.c, fxotune.c: minor fixes to accommodate compilers
	  who check return result usage

2008-11-19 21:16 +0000 [r5334]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi.init: LSB init script comments.

2008-11-17 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools version 2.1.0-rc4 released.

2008-11-16 17:55 +0000 [r5308-5309]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* hdlcverify.c: Fix a compilation warning about signedness

	* hdlcstress.c, patgen.c, patlooptest.c, pattest.c, hdlctest.c: Fix
	  usage strings and eliminate all traces of tor

2008-11-10 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools 2.1.0-rc3 released.

2008-11-06 22:38 +0000 [r5266]  Doug Bailey <dbailey@digium.com>

	* zonedata.c: set DTMF twist levels for listed EU countries to meet
	  TBR-21 standard of -9/-11 dB

2008-11-05 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools 2.1.0-rc2 released.

2008-11-05 19:17 +0000 [r5231]  Shaun Ruffell <sruffell@digium.com>

	* system.conf.sample: Update system.conf.sample to clarify BRI
	  configuration.

2008-11-04 15:58 +0000 [r5228]  Shaun Ruffell <sruffell@digium.com>

	* hdlcstress.c, hdlcverify.c, hdlcgen.c, hdlctest.c: Fix
	  compilation issues with the hdlc tests.

2008-11-03 20:14 +0000 [r5226]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Bump SONAME of libtonezone to 2.0: API and ABI have not
	  changed from Zaptel, but the library behaves differently.

2008-11-03 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools 2.1.0-rc1 released.

2008-10-28 20:42 +0000 [r5160]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Chans.pm: Get wcb4xxp listed in lsdahdi .

2008-10-28 18:34 +0000 [r5155]  Shaun Ruffell <sruffell@digium.com>

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm, blacklist.sample,
	  modules.sample: Adding support for the wcb4xxp module.

2008-10-27 16:07 +0000 [r5134]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Xpp/Line.pm,
	  xpp/perl_modules/Dahdi/Xpp.pm: perl xpp: Support for FXO batter
	  attribute from sysfs (from r5133). Still falls back to reading
	  the battery status from procfs. Also fixes error message.

2008-10-16 18:03 +0000 [r5098-5099]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/waitfor_xpds (added), xpp/perl_modules/Dahdi/Xpp/Line.pm,
	  xpp/Makefile, xpp/perl_modules/Dahdi/Xpp/Xpd.pm, dahdi.init,
	  xpp/perl_modules/Dahdi/Xpp.pm: xpp: userspace support for sysfx
	  migration. The userspace side of dahdi-linux r5097. * Perl
	  modules default to using xpp sysfs but will fallback (with
	  warning) to procfs interface. * An additional
	  /usr/share/dahdi/waitfor_xpds to replace the line in the init.d
	  script.

	* xpp/dahdi_genconf: dahdi_genconf: report channel number in case
	  of error.

2008-10-15 17:11 +0000 [r5094]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Chans.pm: Dahdi-perl: Fix detection of
	  empty slots in Rhino analog cards. Closes issue #13685

2008-10-12 23:09 +0000 [r5088]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/dahdi.cgi (added): A CGI script to give some information
	  about Zaptel through the Dahdi perl interface. A simple demo. Not
	  installed automatically.

2008-10-10 18:29 +0000 [r5079-5082]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Fix 'make config' for distros with no chkconfig and no
	  update-rc.d . This would cause the error on 'make config' for
	  "unknown command dahdi", and 'make -n config' would show that it
	  tries to run "dahdi defaults 15 30"

	* dahdi_test.c: revert r5077 as r5078 fixes this better: now we can
	  use 8 entries in a line.

	* dahdi_test.c: make dahdi_test's prints fit in one line. It makes
	  them slightly less "accurate", but we already use it in the
	  verbose messages, and dahdi_test is not really accurate.

2008-10-10 16:15 +0000 [r5072-5077]  Sean Bright <sean.bright@gmail.com>

	* dahdi_test.c: Wrap at 6 instead of 8 so we are sure to fit on an
	  80 column terminal.

	* dahdi.init: Return the appropriate values to indicate if the
	  modules are loaded or not.

	* dahdi.init: Add a status command to the DAHDI init script.
	  (closes issue #13655) Reported by: jcollie Patches:
	  0001-Add-a-trivial-status-command-to-the-init-script.patch
	  uploaded by jcollie (license 412) (Slight modification by me to
	  update the usage text)

2008-10-03 19:37 +0000 [r5044]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Config/GenconfDefaults.pm: When the config
	  file is not found: return "empty" data and don't die. Closes
	  issues #13615 .

2008-10-03 19:03 +0000 [r5038-5042]  Sean Bright <sean.bright@gmail.com>

	* dahdi_test.c: Whitespace and formatting only.

	* dahdi_test.c: The first line was getting wrapped after 7 instead
	  of 8.

	* xpp/genzaptelconf (removed), xpp/genzaptelconf.8 (removed):
	  Remove some leftovers.

	* dahdi_scan.c, doc/dahdi_scan.8: Fix the dahdi_scan manpage
	  (s/dahdi_span/dahdi_scan/) and make dahdi_scan do what it is
	  advertised to do. Namely take span numbers on the command line.
	  (closes issue #13614) Reported by: jfinstrom

2008-09-29 Shaun Ruffell <sruffell@digium.com>

	* dahdi-tools 2.0.0 released.

2008-09-25 15:47 +0000 [r4984]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi.init: dahdi_init: Fix a typo in xpp initialization (Stephen
	  Farrell)

2008-09-24 19:54 +0000 [r4977]  Sean Bright <sean.bright@gmail.com>

	* build_tools/menuselect-deps.in, configure, configure.ac,
	  dahdi.xml: Re-enable sethdlc by default in menuselect. Add
	  configure checks to properly discover the linux/hdlc.h
	  dependency.

2008-09-24 17:35 +0000 [r4975]  Jason Parker <jparker@digium.com>

	* dahdi.xml: Disable sethdlc in menuselect by default. This is how
	  it was in Zaptel, and it's causing issues. Ideally, this would
	  eventually be checked in the configure script.

2008-09-23 04:56 +0000 [r4969]  Shaun Ruffell <sruffell@digium.com>

	* README: Removing the note about running install_prereq since from
	  the README since that script is not present currently.

2008-09-16 18:26 +0000 [r4913-4915]  Shaun Ruffell <sruffell@digium.com>

	* dahdi.init: Remove the extra space printed after each line when a
	  module is loaded.

	* dahdi_cfg.c: Close the /dev/dahdi/channel file handle if we're
	  unable to associate it with a particular channel.

	* dahdi_cfg.c: Provide system error information if open on
	  /dev/dahdi/channel fails.

2008-09-12 18:06 +0000 [r4904]  Sean Bright <sean.bright@gmail.com>

	* Makefile, /, configure, configure.ac, makeopts.in: A few changes:
	  1) Start using menuselect trunk 2) Bring in changes similar to
	  those in asterisk trunk so that 'make menuselect' works as it
	  should from the dahdi-tools directory. 3) Stop looking for
	  curses/ncurses in the top level configure since nothing uses it
	  (except menuselect which will find it on it's own).

2008-09-11 20:52 +0000 [r4894]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/Makefile, xpp/xpp.rules (removed): Move udev rules xpp.rules
	  from dahdi-tools to dahdi-linux .

2008-09-11 15:45 +0000 [r4891-4893]  Jason Parker <jparker@digium.com>

	* Makefile: Fix installation of ifup-hdlc and init script when
	  using DESTDIR. (Step 2 of cleanup) (closes issue #13430) Reported
	  by: jcollie Patches:
	  0001-Fix-install-of-ifup-hdlc-when-installing-into-an-alt.patch
	  uploaded by jcollie (license 412) Tested by: qwell Note: Patch
	  from #13430 was extended to modify init script installation as
	  well.

	* build_tools/genmodconf (removed), dahdi.rules (removed),
	  build_tools/genudevrules (removed): Remove files that aren't used
	  or are duplicated from dahdi-linux. Step 1 of cleanup.

2008-09-09 18:21 +0000 [r4882-4883]  Jason Parker <jparker@digium.com>

	* Makefile: Fix a few typos

	* dahdi.init: Fix location of fxotune (closes issue #13428)
	  Reported by: eeman

2008-09-04 16:37 +0000 [r4860]  Shaun Ruffell <sruffell@digium.com>

	* Makefile, UPGRADE.txt: * Updates the instructions presented after
	  'make config' about where to set which modules are loaded. *
	  Update UPGRADE.txt to indicate where to set which modules are
	  loaded and where the module parameters are set. Issue# DAHDI-187

2008-09-03 19:38 +0000 [r4859]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, README, UPGRADE.txt: Slightly reformat UPDATES.txt for
	  asciidoc . Include it in README.html . See e.g.
	  http://docs.tzafrir.org.il/dahdi-tools/README.html#_upgrade_notes
	  Also fix some links in the README.

2008-08-28 21:40 +0000 [r4853-4855]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi.init: Simplify reading list of modules from
	  /etc/dahdi/modules .

	* doc, xpp: Ignore generated HTML files.

	* xpp/Makefile: Don't install genzaptelconf: deprecated, and
	  collides with Zaptel.

2008-08-27 17:13 +0000 [r4845-4850]  Kevin P. Fleming <kpfleming@digium.com>

	* modules.sample, dahdi.init: remove some silly echo statement
	  constructions in the init script clean up the modules.sample file
	  to have proper lists of cards supported by each module and remove
	  reference to dahdi_dummy since the init script takes care of
	  loading that module

	* makeopts.in, fxotune.c: actually implement the rest of
	  --enable-dev-mode, and fix up more problems it found

	* Makefile, configure, configure.ac, sethdlc.c, makeopts.in,
	  dahdi_cfg.c: add --enable-dev-mode support, and fix up a couple
	  of warnings found using it (only two, surprisingly)

2008-08-26 14:35 +0000 [r4833-4844]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, README, system.conf.sample: * Add a "docs" target to
	  generate documentation. * Demote/promote some headers. * Fix URL
	  for on-line copy of the README.

	* xpp/perl_modules/Dahdi/Chans.pm: Fix default path of dahdi_cfg
	  (used for probing type of wctdm channels)

2008-08-25 16:12 +0000 [r4826-4827]  Jason Parker <jparker@digium.com>

	* dahdi_cfg.c: Fix more crazy formatting

	* dahdi_cfg.c: Reverse some incorrect logic, and cleanup some very
	  ugly formatting in passing.

2008-08-24 10:53 +0000 [r4821-4822]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* dahdi_cfg.c: We've got a new "zap" string to zap.

	* dahdi_cfg.c: dahdi_cfg.c: Reduce nesting in main() .

2008-08-24 05:54 +0000 [r4818]  Matthew Fredrickson <creslin@digium.com>

	* dahdi_cfg.c: Add support for 56 KB HDLC as well as selectable
	  rate in system.conf

2008-08-20 Kevin P. Fleming <kpfleming@digium.com>

	* dahdi-tools version 2.0.0-rc2 released.

2008-08-17 15:50 +0000 [r4787]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Chans.pm: Dahdi::Chans: fix leftovers from
	  r4767 (handling of spaces) While r4767 solved some parsing
	  problems of channels with "strange" encoding names, it introduced
	  a new problem (e.g.: "RED" after "(In use)" which is fixed here.

2008-08-12 12:59 +0000 [r4764-4767]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/perl_modules/Dahdi/Chans.pm: Dahdi-perl: More robust parsing
	  of channel signalling types. Use a list of signalling types
	  rather than a regular experssion of a "word".

	* xpp/dahdi_genconf, xpp/genconf_parameters: MFC/R2 configuration
	  generation support If optional setting 'pri_connection_type' is
	  set to R2, configure E1 spans as CAS and generate a unicall.conf
	  snippet (unicall-channels.conf).

	* xpp/perl_modules/Dahdi/Hardware/PCI.pm, xpp/xpp_fxloader: *
	  xpp_fxloader: shows USB firmware version. * Update PCI IDs
	  database.

	* xpp/lsdahdi, xpp/perl_modules/Dahdi/Chans.pm: Dahdi-perl: Add
	  alarms() method for channels. Use it in lsdahdi. * Better paring
	  of the /proc/dahdi/N channel lines for alarms * Provide it as a
	  separate alarms() method.

2008-08-06 Kevin P. Fleming <kpfleming@digium.com>

	* dahdi-tools version 2.0.0-rc1 released.