2006-08-22 Kevin P. Fleming * Zaptel 1.2.8 released 2006-08-19 02:27 +0000 [r1327] Kevin P. Fleming * wct4xxp_base.c: don't report the VPM servicing more spans than the card actually has 2006-08-18 20:20 +0000 [r1326] Matt Frederickson * Makefile: Add b410p support into 1.2 Makefile. 2006-08-16 01:36 +0000 [r1317] Tilghman Lesher * zaptel.init: Bug 7624 - Debian lacks /var/lock/subsys 2006-08-15 22:06 +0000 [r1311-1315] Russell Bryant * fxotune.c: Ensure that fopen() is only called once for the debug output file to prevent excessive file descriptor leakage when this function is called many times in a loop. (issue #7203) * Makefile: fix erroneous check to see if PWD was set before setting it in the Zaptel Makefile. It should always be set. If not, it breaks the build when using recursive calls to make. (issue #7733, tzafrir) * zaptel.c: fix passing a 'w' to wait when using pulse dialing (issue #7738, hanabana) 2006-08-14 20:40 +0000 [r1306] Kevin P. Fleming * zaptel.c: revert this change until a version that compiles on 2.4 kernels and older 2.6 kernels is made available and tested 2006-08-14 04:07 +0000 [r1298-1304] Russell Bryant * zaptel.c: fix potential deadlock found by kernel's lock checker (issue #7620, reported by smurfix, fixed by Corydon) * wct4xxp_base.c: add a note that ENABLE_TASKLETS is not implemented in wct4xxp (issue #7688) * Makefile: the change from $(PWD) to $(SUBDIRS) breaks the build on some systems. So, just use them both ... (issue #7720) 2006-08-08 22:22 +0000 [r1262] Kevin P. Fleming * include/apilib/octapi_llman.h, include/oct6100api/oct6100_events_inst.h, include/oct6100api/oct6100_chip_open_inst.h, include/oct6100api/oct6100_tlv_inst.h, include/oct6100api/oct6100_phasing_tsst_inst.h, include/octtypewin.h, include/oct6100api/oct6100_channel_inst.h, include/oct6100api/oct6100_chip_stats_pub.h, include/octosdependant.h, include/oct6100api/oct6100_tone_detection_pub.h, include/octrpc/oct6100_rpc_protocol.h, include/oct6100api/oct6100_events_pub.h, include/oct6100api/oct6100_adpcm_chan_inst.h, include/oct6100api/oct6100_chip_open_pub.h, include/oct6100api/oct6100_phasing_tsst_pub.h, include/oct6100api/oct6100_errors.h, include/oct6100api/oct6100_channel_pub.h, include/apilib/octapi_bt0.h, include/oct6100api/oct6100_debug_inst.h, include/oct6100api/oct6100_interrupts_pub.h, include/oct6100api/oct6100_playout_buf_inst.h, include/oct6100api/oct6100_debug_pub.h, include/octrpc/rpc_protocol.h, include/oct6100api/oct6100_chip_stats_inst.h, include/oct6100api/oct6100_apimi.h, include/oct6100api/oct6100_tone_detection_inst.h, include/oct6100api/oct6100_apiud.h, include/octdef.h, include/oct6100api/oct6100_tsi_cnct_inst.h, include/octtypevx.h, include/octmac.h, include/oct6100api/oct6100_api_inst.h, include/oct6100api/oct6100_remote_debug_pub.h, include/oct6100api/oct6100_conf_bridge_pub.h, include/oct6100api/oct6100_api.h, include/oct6100api/oct6100_tsi_cnct_pub.h, include/oct6100api/oct6100_interrupts_inst.h, include/oct6100api/oct6100_defines.h, vpm450m.c, include/oct6100api/oct6100_mixer_inst.h, include/oct6100api/oct6100_adpcm_chan_pub.h, include/octtype.h, include/oct6100api/oct6100_mixer_pub.h, include/oct6100api/oct6100_tsst_inst.h, include/apilib/octapi_largmath.h, include/oct6100api/oct6100_remote_debug_inst.h, include/oct6100api/oct6100_conf_bridge_inst.h, include/oct6100api/oct6100_playout_buf_pub.h: update Octasic API headers (but not code yet) to PR43, and use version with GPL licenses instead of proprietary licenses 2006-08-05 05:53 +0000 [r1259] Russell Bryant * Makefile: Fix the zaptel build on SuSE 10.1 (issue #7536, hk) 2006-07-27 15:06 +0000 [r1248] Joshua Colp * Makefile: Use INSTALL_PREFIX when installing firmware (issue #7600 reported by jcollie) 2006-07-19 13:50 +0000 [r1243] Joshua Colp * wct4xxp_base.c, Makefile: Only use hotplug firmware loading if the kernel has support for it 2006-07-16 00:16 +0000 [r1236] Joshua Colp * Makefile: Minor Makefile adjustment for installing the firmware 2006-07-16 00:12 +0000 [r1235] Kevin P. Fleming * wct4xxp_base.c: eliminate compiler warning 2006-07-15 20:26 +0000 [r1233] Joshua Colp * wct4xxp_base.c, Makefile, vpm450m.h, vpm450m.c: Add support for loading the VPM450M firmware using hotplug from userspace. 2006-07-14 20:19 +0000 [r1230] Tzafrir Cohen * xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_fxs.c, xpp/xpp_usb.c, xpp/xpp_zap.c: NULLify pointers to /proc files after removing them (so anyone who tries to access them afterwards causes Oops instead of unknown behaviour). 2006-07-14 Kevin P. Fleming * Zaptel 1.2.7 released 2006-07-14 20:19 +0000 [r1226-1230] Tzafrir Cohen * xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_fxs.c, xpp/xpp_usb.c, xpp/xpp_zap.c: NULLify pointers to /proc files after removing them (so anyone who tries to access them afterwards causes Oops instead of unknown behaviour). * xpp/utils/genzaptelconf: genzaptelconf: Fix version strings * xpp/utils/genzaptelconf: genzaptelconf: fixed confusion between framing and coding for E1/{il/nl} * xpp/utils/genzaptelconf: genzaptelconf: use /proc/xpp/XBUS-*/wait_for_xpds rather than a timeout loop * xpp/card_fxs.c, xpp/init_data_3_20.cmd: FXS current fixes (init parameters and on runtime) 2006-07-08 00:43 +0000 [r1212] Tzafrir Cohen * xpp/utils/hexfile.c (added), xpp/xpp_fxloader.usermap (removed), xpp/utils/xpp_fxloader.usermap (added), xpp/xpp_zap.h, xpp/utils/hexfile.h (added), xpp/xpp_proto.c (removed), xpp/FPGA_XPD.hex (removed), xpp/slic.c, xpp/xproto.c, xpp/xpp_proto.h (removed), xpp/slic.h, xpp/utils/FPGA_FXS.hex (added), xpp/utils/USB_1130.hex (added), xpp/xproto.h, xpp/xpd.h, xpp/init_data_3_20.cmd (added), xpp/sync.sh (removed), xpp/xbus-core.c (added), xpp/utils/test_parse.c (added), xpp/init_data_4_19.cmd (added), xpp/utils/xpp_fxloader (added), xpp/xpp_fxloader (removed), xpp/xbus-core.h (added), xpp/utils/fpga_load.c (added), xpp/xdefs.h, xpp/utils (added), xpp/utils/genzaptelconf.8 (added), xpp/gen_slic_init (removed), xpp/card_fxo.c (added), xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/card_fxo.h (added), xpp/Makefile, xpp/cards.c (removed), xpp/utils/Makefile (added), xpp/card_fxs.h, xpp/card_global.h, xpp/zap_debug.c, xpp/cards.h (removed), xpp/init_data_4_20.cmd (added), xpp/utils/fpga_load.8 (added), xpp/slic_init.inc (removed), xpp/zap_debug.h, xpp/initialize_registers (added), xpp/init_data_3_19.cmd (added), xpp/LICENSE.firmware (added), xpp/utils/USB_8613.hex (added), xpp/xpp_modprobe (removed), xpp/utils/xpp_modprobe (added), xpp/utils/genzaptelconf (added), xpp/xpp_usb.c, xpp/xpp_zap.c: xpp Release 1.1.0 : * FPGA firmware now loaded from PC (for newer models) * Driver for the FXO module (xpd_fxo.ko) * Moved most userspace files to the subdirectory utils (see also next commit) * Explicit license for firmware files * Optionally avoid auto-registration * Registers initializations code is done by a userspace script. * Remove obsolete .inc initialization files (we use user-space init) * Added an install target to the utils dir. * Updated README.Astribank accordingly. * Using RBS signalling, as caller ID did not work well otherwise. * Better handling of USB protocol errors. * Fixed some procfs-related races. * per-card-module ioctls. * fxotune support. * opermode support (set through /etc/default/zaptel for now) * Userspace initialization script can also read registers. * Power calibration works (and implemented in perl) * some fine-tuning to the regster initialization parameters. * Leds turn on before registration and turn off after it. 2006-07-07 18:03 +0000 [r1206] Russell Bryant * include/oct6100api/oct6100_chip_open_inst.h (added), include/oct6100api/oct6100_chip_stats_priv.h (added), include/oct6100api/oct6100_events_inst.h (added), include/oct6100api/oct6100_tone_detection_priv.h (added), include/oct6100api/oct6100_phasing_tsst_inst.h (added), include/octtypewin.h (added), include/oct6100api/oct6100_channel_inst.h (added), include/octosdependant.h (added), include/oct6100api/oct6100_tone_detection_pub.h (added), include/oct6100api/oct6100_events_pub.h (added), include/oct6100api/oct6100_adpcm_chan_inst.h (added), include/oct6100api/oct6100_chip_open_pub.h (added), fw2h.c (added), include/oct6100api/oct6100_errors.h (added), include/oct6100api/oct6100_channel_pub.h (added), include/oct6100api/oct6100_interrupts_priv.h (added), include/oct6100api/oct6100_debug_inst.h (added), include/oct6100api/oct6100_mixer_priv.h (added), include/oct6100api/oct6100_interrupts_pub.h (added), include/oct6100api/oct6100_playout_buf_inst.h (added), wct4xxp.c (removed), include/octrpc/rpc_protocol.h (added), include/oct6100api/oct6100_tsst_priv.h (added), include/oct6100api/oct6100_apimi.h (added), include/oct6100api/oct6100_conf_bridge_priv.h (added), include/octdef.h (added), include/oct6100api/oct6100_tsi_cnct_inst.h (added), include/octtypevx.h (added), include/oct6100api/oct6100_chip_open_priv.h (added), include/oct6100api/oct6100_events_priv.h (added), include/oct6100api/oct6100_phasing_tsst_priv.h (added), include/oct6100api/oct6100_remote_debug_pub.h (added), include/oct6100api/oct6100_channel_priv.h (added), include/oct6100api/oct6100_memory_priv.h (added), include/oct6100api/oct6100_adpcm_chan_priv.h (added), wct4xxp_base.c (added), include/octtype.h (added), include/oct6100api/oct6100_debug_priv.h (added), octapi_bt0_private.h (added), include/oct6100api/oct6100_playout_buf_priv.h (added), include/oct6100api/oct6100_remote_debug_inst.h (added), include/apilib/octapi_llman.h (added), include/oct6100api/oct6100_tlv_inst.h (added), include/octrpc (added), include/oct6100api/oct6100_tsi_cnct_priv.h (added), include/oct6100api/oct6100_chip_stats_pub.h (added), include/octrpc/oct6100_rpc_protocol.h (added), include/oct6100api/oct6100_phasing_tsst_pub.h (added), include/apilib/octapi_bt0.h (added), octvpm.h (added), include/oct6100api/oct6100_version.h (added), include/oct6100api/oct6100_debug_pub.h (added), include/oct6100api (added), include/oct6100api/oct6100_chip_stats_inst.h (added), include/oct6100api/oct6100_tone_detection_inst.h (added), include/oct6100api/oct6100_remote_debug_priv.h (added), Makefile, include/oct6100api/oct6100_apiud.h (added), include/oct6100api/oct6100_miscellaneous_priv.h (added), include/octmac.h (added), include/oct6100api/oct6100_tlv_priv.h (added), include/oct6100api/oct6100_api_inst.h (added), include/oct6100api/oct6100_conf_bridge_pub.h (added), OCT6114-128D.ima (added), octapi_llman_private.h (added), include/apilib (added), include (added), include/oct6100api/oct6100_api.h (added), include/oct6100api/oct6100_tsi_cnct_pub.h (added), include/oct6100api/oct6100_interrupts_inst.h (added), include/oct6100api/oct6100_defines.h (added), vpm450m.c (added), include/oct6100api/oct6100_mixer_inst.h (added), vpm450m.h (added), include/oct6100api/oct6100_adpcm_chan_pub.h (added), include/oct6100api/oct6100_mixer_pub.h (added), include/oct6100api/oct6100_tsst_inst.h (added), include/apilib/octapi_largmath.h (added), include/oct6100api/oct6100_conf_bridge_inst.h (added), include/oct6100api/oct6100_playout_buf_pub.h (added): merge vpm450m support 2006-07-07 18:02 +0000 [r1205] Joshua Colp * wctdm.c: Add missing TDM400 PCI definition (issue #7502 reported by chozian) 2006-06-28 19:13 +0000 [r1185-1187] Joshua Colp * zaptel.sysconfig: Add Xorcom Astribank per tzafrir's request * zaptel.sysconfig: Add the TDM2400P to the sysconfig file (issue #7441 reported by mrobinson) 2006-06-21 19:27 +0000 [r1151] Joshua Colp * zonedata.c: Add Venezuelan tone information (issue #7402 reported by palillo) 2006-05-31 19:42 +0000 [r1101] Kevin P. Fleming * wctdm24xxp.c: minor typo in error message 2006-05-31 03:59 +0000 [r1097] Tilghman Lesher * tor2-hw.h: Bug 7248 - PCI IDs for a tor2 clone card 2006-05-30 Kevin P. Fleming * Zaptel 1.2.6 released 2006-05-23 17:51 +0000 [r1079-1081] Kevin P. Fleming * build_tools/genmodconf: handle distros that ship pre-releases of module-init-tools * Makefile, build_tools/genmodconf: make a backup even when modifying non-combined rules files generate a warning about editing non-combined rules files ensure that the warning is the last output from the 'make install' process 2006-05-20 12:55 +0000 [r1076] Kevin P. Fleming * pciradio.c: update module to work with kernels that don't include 2.4 module parameter compatibility macros (reported by tzafrir on asterisk-dev) 2006-05-18 15:40 +0000 [r1073] Joshua Colp * fxotune.c: Clear dialtone before running tests (issue #7136 reported and fixed by trumpetinc) 2006-05-17 22:26 +0000 [r1071] Kevin P. Fleming * Makefile: fix more buglets from my recent cleanups 2006-05-17 21:13 +0000 [r1068-1069] Joshua Colp * wctdm.c: Don't change the value of lasttxhook, instead do a comparison. (issue #7175 reported and fixed by Thomas Andrews) If this breaks things, you can yell at me. 2006-05-17 19:05 +0000 [r1064-1066] Kevin P. Fleming * Makefile: revert some 'grep -q' changes that were wrong (oops) * Makefile, build_tools/genmodconf (added): move module-rules building into a script, and remove some old unnecessary steps * Makefile, udev (removed), build_tools/genudevrules (added): move udev rules creating into a script, and generate it properly based on the installed udev version 2006-05-16 14:59 +0000 [r1060-1062] Kevin P. Fleming * Makefile: silly... only root needs write permission * udev/zaptel.rules, Makefile, udev/zaptel.rules-combined: ensure that PWD is set early enough for 'make install' to actually work use proper KERNEL matching syntax for udev rules don't install udev rules as mode 0444; there is no need to make them read-only 2006-05-09 11:46 +0000 [r1031-1033] Kevin P. Fleming * Makefile: preserve 'options' settings in the module configuration file during 'make install' * Makefile: use commmand-line parameter substitution for modprobe commands if the system's module-init-tools is new enough to support it don't backup and use the old configuration file for modules if we are using a zaptel-specific file in /etc/modprobe.d or similar 2006-04-30 16:24 +0000 [r1011-1017] Kevin P. Fleming * Makefile: build xpp by default, now that the Makefile can determine when an appropriate kernel version is being used for the build * Makefile: restore building of XPP modules * Makefile: optimize variable settings use the kernel Makefile for every step that it can be * Makefile: remove duplicate dependencies and unnecessary rules * Makefile, gendigits.c: allow the output of gendigits to be redirected to a different directory from the current working directory 2006-04-19 21:18 +0000 [r1004] Kevin P. Fleming * wctdm24xxp.c: this product is no longer a prototype :-) 2006-04-03 07:08 +0000 [r995] Tzafrir Cohen * xpp/card_fxs.c, xpp/xpp_usb.c, xpp/xpp_zap.c: by default don't debug 2006-04-02 06:51 +0000 [r994] Tzafrir Cohen * xpp/xpp_usb.c: fix build of xpp for kernel 2.6.14 2006-03-28 18:22 +0000 [r990] Russell Bryant * arith.h: suppress some warnings (issue #6814) 2006-03-06 Kevin P. Fleming * Zaptel 1.2.5 released 2006-03-04 21:50 +0000 [r974-976] Mark Spencer * wctdm24xxp.c: Increase default ring debounce slightly and use the value properly. * wct4xxp.c: Fix NMI issues with some IBM xSeries servers 2006-03-03 20:14 +0000 [r973] Tzafrir Cohen * xpp, xpp/xpd.h, xpp/xpp_usb.c: small compilation issues 2006-03-03 19:11 +0000 [r970] Russell Bryant * xpp/README.Astribank (added), README.Astribank: move the main Astribank readme into the xpp directory so they can manage it 2006-02-18 17:02 +0000 [r962] Tilghman Lesher * Makefile: Make sure version.h gets built properly 2006-02-16 17:56 +0000 [r958] Russell Bryant * xpp/xpp_usb.c: fix build for linux 2.6.16 (issue #6505) 2006-02-15 Russell Bryant * Zaptel 1.2.4 Released 2006-02-15 02:24 +0000 [r947-949] Kevin P. Fleming * xpp/xpp_fxloader.usermap (added), Makefile, xpp/gen_slic_init (added), xpp/xpp_zap.h (added), xpp/card_global.c (added), xpp/card_fxs.c (added), xpp/slic.c (added), xpp/FPGA_XPD.hex (added), xpp/xpp_proto.c (added), xpp/xproto.c (added), xpp/cards.c (added), xpp/Makefile (added), xpp/card_global.h (added), xpp/card_fxs.h (added), xpp/slic.h (added), xpp/xpp_proto.h (added), xpp/zap_debug.c (added), xpp/xproto.h (added), xpp/xpd.h (added), xpp/cards.h (added), xpp/sync.sh (added), xpp/slic_init.inc (added), xpp/zap_debug.h (added), xpp/xpp_fxloader (added), xpp/xpp_modprobe (added), xpp/xdefs.h (added), xpp (added), xpp/xpp_usb.c (added), xpp/xpp_zap.c (added), README.Astribank (added): initial import of Xorcom Astribank driver (issue #6452, with minor mods) * wctdm.c: automatically set operational paramters for Australia when that opermode is seleced (issue #6454) 2006-02-10 21:08 +0000 [r940] Mark Spencer * wctdm24xxp.c: More updates for Rev B VPM 2006-02-09 22:41 +0000 [r937] Tilghman Lesher * zaptel.init: Bug 6451 - Default to probe and remove newest Digium card 2006-02-01 02:33 +0000 [r930] Russell Bryant * ztcfg.c: fix a couple of typos in error messages 2006-01-31 06:38 +0000 [r927] Mark Spencer * wct4xxp.c, wctdm24xxp.c: Fix compile warning in tdm2400p and make sure dmactrl is updated if vpm detected. 2006-01-31 Russell Bryant * Zaptel 1.2.3 Released 2006-01-31 01:26 +0000 [r922] Mark Spencer * wctdm24xxp.c: Add support for VPM100M Rev B 2006-01-26 00:45 +0000 [r917] Russell Bryant * ztdummy.c: backport RTC support for x86_64 2006-01-19 04:40 +0000 [r907-911] Russell Bryant * wcusb.c: remove owner field for 2.6.16 (issue #6288) * ztdummy.c: fix symbol conflict with the kernel's rtc_interrupt function (issue #6287) * ChangeLog (removed): remove extremely old ChangeLog ... they will now only exist in tags 2006-01-18 Russell Bryant * Zaptel 1.2.2 Released 2006-01-12 16:07 +0000 [r892] Mark Spencer * wct4xxp.c: Fix loopup / loopdown code detection 2006-01-10 20:32 +0000 [r885] Matt Frederickson * Makefile, fxotune.c: Fix libtonezone naming scheme for minor numbers 2005-12-28 22:10 +0000 [r879] Kevin P. Fleming * Makefile, udev/zaptel.rules-combined (added): support newer udev rules+permissions format install udev rules by default, since it's so common on distros now 2005-12-22 22:51 +0000 [r874] Kevin P. Fleming * wctdm24xxp.c: adjust input/output signals from FXO modules that were too high 2005-12-17 02:04 +0000 [r865] Kevin P. Fleming * Makefile, build_tools (added), build_tools/make_svn_branch_name, /, zaptel.c, zaptel.h, build_tools/make_version_h: add version and echo canceller selection reporting when zaptel module is loaded make 'update' target work like the Asterisk one and report conflicts 2005-12-16 00:16 +0000 [r859] Kevin P. Fleming * wctdm24xxp.c: remove some debugging #if statements dont force cardflag on for modules that are not present (so applications can't try to open non-existent ports) 2005-12-13 19:08 +0000 [r855-857] Kevin P. Fleming * wctdm.c: ensure data is output to proper io port address (issue #5990) * Makefile: properly escape shell variable (from asterisk-users mailing list post) 2005-12-04 19:29 +0000 [r848-850] Kevin P. Fleming * Makefile: make Gentoo support actually work... * Makefile: add support for Gentoo modules.d directory * wctdm.c, wctdm24xxp.c: merge ringer changes from revs 845:847 in trunk 2005-12-02 00:03 +0000 [r843] Russell Bryant * zaptel.c: fix udev support for 2.6.15 (issue #5891) 2005-12-01 23:14 +0000 [r841] Kevin P. Fleming * Makefile: Makefile 'update' target now supports updating from Subversion repositories (issue #5875) 2005-11-29 18:42 +0000 [r831-837] Kevin P. Fleming * wct4xxp.c: merge rev 834 from trunk (2nd gen VPM400M support)