2007-04-24 Russell Bryant * Zaptel 1.4.2 released. 2007-04-24 18:34 +0000 [r2433-2435] Jason Parker * /: Blocked revisions 2434 via svnmerge ........ r2434 | qwell | 2007-04-24 13:33:29 -0500 (Tue, 24 Apr 2007) | 1 line Backport pre-echocan debugging for ztmonitor ........ * zaptel.h, zconfig.h, ztmonitor.c, jpah.h (added), zaptel-base.c: Merge in pre-echocan debugging for ztmonitor. 2007-04-13 23:14 +0000 [r2423] Jason Parker * /, zaptel-base.c: Merged revisions 2422 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2422 | qwell | 2007-04-13 18:12:23 -0500 (Fri, 13 Apr 2007) | 14 lines Fix several places where we treat confmode as a bitmask. It is a bitmask...sort of.. I'll explain.. confmode is used for 2 different things. It defines both the "mode" and the "flags" of the conference. The "mode" part is in 0x00FF and is NOT bitwise. The "flag" part is in 0xFF00 and *IS* bitwise. Confused yet? Good. So, when we want to check the "mode" of the conference, we need to check only within 0xFF. There were several places where this was not happening - but due to luck, it worked (...sort of). That's what this patch fixes. ........ 2007-04-11 19:03 +0000 [r2406] Matt Frederickson * /, zaptel-base.c: Merged revisions 2405 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2405 | mattf | 2007-04-11 14:01:21 -0500 (Wed, 11 Apr 2007) | 4 lines Fix buglet in memory corruption fix. ........ 2007-04-07 16:47 +0000 [r2397] Matt Frederickson * zaptel-base.c: Fix for #9208. Memory corruption within zaptel data. 2007-03-30 21:03 +0000 [r2359] Matt Frederickson * zaptel-base.c: Fix potential spinlock recursion issue. 2007-03-30 18:57 +0000 [r2354] Jason Parker * /, zaptel-base.c: Merged revisions 2353 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2353 | qwell | 2007-03-30 13:56:46 -0500 (Fri, 30 Mar 2007) | 4 lines Fix an issue where an echo can was freed incorrectly in certain circumstances. Issue 9292, fix suggested by ddv2005. ........ 2007-03-29 16:36 +0000 [r2348-2351] Russell Bryant * README.hpec, /, zaptel.init: Merged revisions 2350 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2350 | russell | 2007-03-29 11:35:37 -0500 (Thu, 29 Mar 2007) | 4 lines Trim the HPEC readme that is included in zaptel to only include basic information as the one on the FTP site will always be the one that contains the full up to date information. Also, tweak some grammar in the additions to the init script. ........ * README.hpec (added), /, zaptel.init: Merged revisions 2347 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2347 | russell | 2007-03-29 11:05:32 -0500 (Thu, 29 Mar 2007) | 3 lines Add a README for HPEC, and add support for HPEC in the init script. (issue #9413, chozian) ........ 2007-03-27 18:49 +0000 [r2343] Russell Bryant * /, zaptel.init: Merged revisions 2342 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2342 | russell | 2007-03-27 13:48:23 -0500 (Tue, 27 Mar 2007) | 5 lines When debug is enabled, ensure that "debug=1" gets passed to the zaptel module, and not just the hardware modules. Also, run "ztcfg -s" at the beginning of the "stop" action of the script. (issue #7409, PCadach and tzafrir) ........ 2007-03-23 02:11 +0000 [r2336] Kevin P. Fleming * Makefile: fix builds for 2.4 kernels 2007-03-22 Kevin P. Fleming * Zaptel 1.4.1 released. 2007-03-23 02:11 +0000 [r2333-2336] Kevin P. Fleming * Makefile: fix builds for 2.4 kernels * mec.h, kb1ec.h, mec2.h, mec3.h, sec-2.h, sec.h, hpec/hpec_zaptel.h, mg2ec.h, zaptel.h, zaptel-base.c: bring in the rest of the support needed for HPEC 2007-03-19 16:30 +0000 [r2323] Joshua Colp * /, README.Linux26: Merged revisions 2322 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2322 | file | 2007-03-19 12:28:58 -0400 (Mon, 19 Mar 2007) | 2 lines Update documentation to match current Makefile. linux26 is no longer a valid target. (issue #9296 reported by valley) ........ 2007-03-14 16:08 +0000 [r2308] Matt Frederickson * wct4xxp/base.c, /: Merged revisions 2307 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2307 | mattf | 2007-03-14 10:03:18 -0600 (Wed, 14 Mar 2007) | 2 lines Fix bug in J1 mode configuration. ........ 2007-03-09 20:04 +0000 [r2302] Matt Frederickson * wct4xxp/vpm450m.c, /: Merged revisions 2301 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2301 | mattf | 2007-03-09 13:59:43 -0600 (Fri, 09 Mar 2007) | 2 lines Make sure we don't allocate as GFP_KERNEL in atomic context ........ 2007-03-08 15:58 +0000 [r2297] Joshua Colp * /, hpec/hpec_zaptel.h: Merged revisions 2296 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2296 | file | 2007-03-08 10:56:05 -0500 (Thu, 08 Mar 2007) | 2 lines vprintk is only available on 2.6.9+ (issue #9232 reported by baconbuttie) ........ 2007-03-08 00:48 +0000 [r2294] Russell Bryant * zaptel.h: Add a constant for ZT_EVENT_REMOVED to allow a driver to hint to userspace that a channel has been removed. (issue #7256, tzafrir) 2007-03-07 19:36 +0000 [r2292] Tzafrir Cohen * Makefile: Don't die when there is no udev rules dir (on an installtion with INSTALL_PREFIX explicitly set). r2290 | tzafrir | 2007-03-07 21:14:30 +0200 (Wed, 07 Mar 2007) | 3 lines 2007-03-05 17:02 +0000 [r2288] Tzafrir Cohen * /, xpp/xpd.h: Found a proper "marker" for the gfp_t typedef. Now every 2.6.9 is supported. r2286 | tzafrir | 2007-03-05 18:14:11 +0200 (Mon, 05 Mar 2007) | 2 lines 2007-03-05 05:42 +0000 [r2283] Kevin P. Fleming * build_tools/make_firmware_object, wcte12xp.c, /: Merged revisions 2280-2282 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2280 | kpfleming | 2007-03-04 23:34:43 -0600 (Sun, 04 Mar 2007) | 2 lines ensure that we run objdump in the most generic language possible to avoid complications on non-English systems (issue #9196) ........ r2281 | kpfleming | 2007-03-04 23:40:37 -0600 (Sun, 04 Mar 2007) | 2 lines remove stray character that my editor decided to add ........ r2282 | kpfleming | 2007-03-04 23:41:30 -0600 (Sun, 04 Mar 2007) | 2 lines this driver does not use workqueues, so does not need this header (issue #9196) ........ 2007-03-02 22:20 +0000 [r2267-2273] Tzafrir Cohen * zaptel.init: Support proper loading of the Astribank (xpp) with proper initialization. * Makefile: Don't "fail" a modprobe of ztdummy just because zaptel.conf is bad. * /, xpp/Makefile: Clarify a cyptic build message. r2266 | tzafrir | 2007-03-02 22:40:06 +0200 (Fri, 02 Mar 2007) | 2 lines 2007-03-01 19:50 +0000 [r2244-2259] Tzafrir Cohen * xpp/xbus-core.c, /: r2257 | tzafrir | 2007-03-01 21:29:12 +0200 (Thu, 01 Mar 2007) | 2 lines SLAB_KERNEL is an obsolete alias of GFP_KERNEL. Fix build on Vanilla 2.6.20 . * /, xpp/utils/Makefile: r2252 | tzafrir | 2007-02-28 22:57:52 +0200 (Wed, 28 Feb 2007) | 3 lines Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 (and actually work, this tine). * /: Forgot to update properties * xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h, xpp/utils/hexfile.h, xpp/xproto.c, xpp/utils/zconf/Zaptel, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h, xpp/xpd.h, xpp/firmwares/USB_1150.hex, xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/zconf/Zaptel/Xpp, xpp/card_bri.c (added), xpp/xbus-core.c, xpp/utils/zconf/Zaptel.pm, xpp/utils/test_parse.c, xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/card_bri.h (added), xpp/utils/xpp_fxloader, xpp/utils/fpga_load.c, xpp/xbus-core.h, xpp/utils/lszaptel (added), xpp/utils/xpp_sync (added), xpp/.version (added), xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c, xpp/card_fxs.c, xpp/card_global.c, xpp/Makefile, xpp/utils/Makefile, xpp/utils/zconf (added), xpp/firmwares/USB_1140.hex, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/utils/zt_registration (added), xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf, xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: xpp rev. 3495: ------------------------------------------------------------------------ r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) | 4 lines * xpp rev. 3495: fix a race in the FXO driver of recent weeks. * Add the Astribank BRI driver (though still needs bristuffed zaptel to build and thus will not build by default) ------------------------------------------------------------------------ r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) | 18 lines Xorcom rev. 3491: * Version of xpp modules is set from xpp/.version, rather than "unknown". * Astribank devices are now initialized in parallel: faster startup when there are multiple Astribanks. * Re-added support for the old format of /proc/xpp/sync write: (echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered. * Firmware update to fix a PCM issue. * Fixed a build issue with kernel 2.6.8 . * Fixed missing initialization in Zaptel::Xpp::Xbus . * genzaptelconf will now set FXS ports as LS by default. To set them as KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel (Also a workaround for #7755 ). * Groundwork for sync from zaptel master span: if zaptel is built with ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its drift from the zaptel sync master. * USB firmware update: had bad lines checksums (and fxload did not report). * fpga_load can now better report bad hex file checksum ;-) . ------------------------------------------------------------------------ r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) | 3 lines Add the Zaptel and Zaptel::Xpp perl modules, and some simple utilities that use them. disabled by default for now. ------------------------------------------------------------------------ r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) | 2 lines Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 . 2007-02-26 18:20 +0000 [r2230-2233] Joshua Colp * Makefile, /: Merged revisions 2232 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2232 | file | 2007-02-26 13:18:13 -0500 (Mon, 26 Feb 2007) | 2 lines Just in case... set hotplug firmware loading option to no if on a 2.4 kernel. (issue #9140 reported by velter) ........ * Makefile: Move menuselect build options inclusion to before it is initially used otherwise the needed variables may not be present at time of use. (issue #9145 reported by jmls) 2007-02-26 10:13 +0000 [r2229] Tzafrir Cohen * doc/fxotune.8: The fxotune man page was misleading. Dumping some content into it. Still needs work. 2007-02-24 00:13 +0000 [r2215-2220] Kevin P. Fleming * datamods/Makefile, wct4xxp/Kbuild (removed), Makefile, wcte12xp.c (added), wct4xxp/Makefile, zaptel.xml, hpec (added), zaptel.c (removed), zttranscode.c, wctc4xxp (added), Makefile.kernel26 (added), wct4xxp/Makefile.kernel26 (added), zaptel.h, firmware/firmware.xml, zaptel-base.c (added): partial update to support all the stuff that went into Zaptel 1.2 recently... this definitely still broken for 2.4 kernels, and maybe for 2.6 as well :-) includes: Makefile split and reorganize TE120P driver TC400B driver HPEC support (not yet complete) 2007-02-21 17:27 +0000 [r2200-2209] Matt Frederickson * wct4xxp/base.c, /: Merged revisions 2208 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2208 | mattf | 2007-02-21 11:26:05 -0600 (Wed, 21 Feb 2007) | 2 lines Make sure we do the IRQ fix in the gen1 interrupt handler as well. ........ * wct4xxp/vpm450m.c, /: Merged revisions 2199 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2199 | mattf | 2007-02-21 09:57:20 -0600 (Wed, 21 Feb 2007) | 2 lines Make sure we do the check for memory allocation failure. ........ * wct4xxp/vpm450m.c, /: Merged revisions 2198 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2198 | mattf | 2007-02-21 09:49:50 -0600 (Wed, 21 Feb 2007) | 2 lines Reduce our stack usage when using the vpm450m ........ 2007-02-21 14:00 +0000 [r2195] Kevin P. Fleming * build_tools/make_svn_branch_name, /: Merged revisions 2194 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2194 | kpfleming | 2007-02-21 08:00:20 -0600 (Wed, 21 Feb 2007) | 2 lines use new tag version numbering script ........ 2007-02-20 20:17 +0000 [r2180] Russell Bryant * Makefile: Fix the check that ran the install for xpp/utils. Also, add a target to build them, and clean the directory in the clean target. (issue #8894, tzafrir) 2007-02-17 17:15 +0000 [r2170] Tzafrir Cohen * xpp/utils/Makefile: xpp/utils: Use autoconf's test for libusb. 2007-02-16 22:18 +0000 [r2167] Matt Frederickson * /, wctdm24xxp.c: Merged revisions 2166 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2166 | mattf | 2007-02-16 16:14:48 -0600 (Fri, 16 Feb 2007) | 2 lines Fix detection of second single port modules so it actually works now. ........ 2007-02-12 23:42 +0000 [r2158-2160] Joshua Colp * firmware/Makefile, Makefile: Add hotplug-uninstall target to main Makefile and make the firmware Makefile keep a record of the installed firmware in the hotplug directory. This means that as long as you have the latest version of firmware installed your checkout will never install it again, and all new checkouts will not either. This might also help those building packages for distros. 2007-02-11 15:48 +0000 [r2151] Tzafrir Cohen * xpp/xbus-core.c: struct inode and debugfs: break some Fedoras rather than all others. (from changeset 2150) 2007-02-10 20:43 +0000 [r2147] Joshua Colp * firmware/Makefile: Only attempt to install firmware to the hotplug directories if any was selected. 2007-02-10 00:22 +0000 [r2142-2146] Kevin P. Fleming * zaptel.xml: add some inter-module dependencies and add wctc4xxp to menuselect list * zaptel.xml: clean up module naming there is no need to enable the user to skip building zaptel or ztdynamic (probably zttranscode too... menuselect needs an upgrade) 2007-02-09 18:39 +0000 [r2136-2140] Joshua Colp * firmware/Makefile: It's probably a good idea to make the tarballs a requirement to make the object files. * firmware/Makefile, wct4xxp/base.c, Makefile: Drop the need for header files by using non-versioned binary files. 2007-02-09 15:06 +0000 [r2123-2135] Tzafrir Cohen * Makefile: Fix 'make clean' on kernel 2.4: datamods is only made on 2.6. * Makefile: Build xpp/ for kernel >= 2.6.8, not >=2.6.9. * xpp/xpp_zap.c: Now 'chans' is used after all. * xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h, xpp/xpd.h, xpp/init_card_4_23 (removed), xpp/init_card_4_24 (added), xpp/init_card_6_24 (added), xpp/xbus-core.c, xpp/utils/adj_clock.c, xpp/utils/xpp_fxloader, xpp/xbus-core.h, xpp/utils/fpga_load.c, xpp/xdefs.h, xpp, xpp/utils/xpp.rules (added), xpp/firmwares/FPGA_1141.hex (added), xpp/card_fxo.c, xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/zaptel-helper (added), xpp/zaptel-helper (removed), xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8, xpp/firmwares/USB_1140.hex (added), xpp/zap_debug.c, xpp/utils/fpga_load.8, xpp/init_card_3_23 (removed), xpp/init_card_3_24 (added), xpp/zap_debug.h, xpp/init_card_7_24 (added), xpp/xpp_log.h (added), xpp/utils/genzaptelconf, xpp/xpp_usb.c: Branch 1.4 is back in sync (currently: xorcom rev. 3332): * Performance improvements for multi-XPD (span) devices. * Astribank BRI driver (in next commit). * Changes under /proc: - XBUS and XPD numbers have two digits. - Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]* - Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop. * Several countries (South Africa, UAE, anybody else) require a shorter ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011. * Use tasklets to move most of the interrupt PCM copying out of the interrupt. * Debugfs-based code to dump data to userspace (used to debug BRI D channel). * Pretend every 2.6.9 actually has later RHEL's typedefs. * fpga_load supports /dev/bus/usb . * Fixed physical order sorting in genzaptelconf. * Reverse polarity and power denial detection. * A short led flash at registration time. * Add a real version of the xpp modules to them (independent of the Zaptel version). * Update our line status even when not registered. * Fixed a false SIG_CHANGED when inserting or removing cable to FXO. * Fixed compilation fixes for 2.6.20 (Bug #8982) * A cleaner fix for the bool changes of 2.6.19 . * Automatically detect echo_can_state_t at debug time. * Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile time. * Bug-fixes to zaptel-helper. Moved to xpp/utils . * Xbus protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3). XPS Init scripts renamed accordingly. 2007-02-07 21:25 +0000 [r2111-2120] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 2119 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2119 | kpfleming | 2007-02-07 15:22:44 -0600 (Wed, 07 Feb 2007) | 2 lines don't allow wct4xxp workqueue support to be built against kernel 2.6.20... it's not going to work ........ * Makefile, xpp/xbus-core.c, /: Merged revisions 2110 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2110 | kpfleming | 2007-02-07 14:29:22 -0600 (Wed, 07 Feb 2007) | 3 lines build XPP on the kernels that Xorcom says are OK to build on update workqueue usage to conform to kernel 2.6.20 API ........ 2007-02-07 20:01 +0000 [r2107] Joshua Colp * wct4xxp/vpm450m.c, build_tools/make_tree (added), firmware (added), wct4xxp/base.c, Makefile, configure, wct4xxp/OCT6114-64D.ima (removed), firmware/firmware.xml, makeopts.in, firmware/Makefile, wct4xxp/Kbuild, zaptel.xml (added), wct4xxp/Makefile, menuselect-tree (removed), wct4xxp/OCT6114-128D.ima (removed), configure.ac: Merge in zaptel-firmware branch. This basically downloads the firmware from the FTP site and builds the appropriate headers based on the current version. Drivers just know they need a certain firmware and get fed the current version. If this prevents your zaptel from building do a make distclean and start fresh or make sure the firmware is checked in make menuselect. 2007-02-07 19:55 +0000 [r2105] Kevin P. Fleming * /, zttranscode.c: Merged revisions 2103 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2103 | kpfleming | 2007-02-07 13:52:29 -0600 (Wed, 07 Feb 2007) | 2 lines include headers we need... new kernel releases won't do it for us ........ 2007-02-07 16:51 +0000 [r2099] Russell Bryant * ztcfg.c: In case the ZT_GETVERSION ioctl fails, ensure that the buffers are initialized to "Unknown" so that we don't try to print uninitialized string buffers. (issue #8992, Oron Peled, tzafrir) 2007-02-05 21:55 +0000 [r2087] Kevin P. Fleming * Makefile, /: Merged revisions 2086 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2086 | kpfleming | 2007-02-05 15:54:40 -0600 (Mon, 05 Feb 2007) | 2 lines fix version-numbering logic ........ 2007-01-31 20:19 +0000 [r2065-2066] Tzafrir Cohen * xpp/zaptel-helper (added): r2064: tzafrir | 2007-01-31 21:48:39 +0200 zaptel-helper deserves wider exposure. Note: it is not getting installed. However it will probably help preven the braking of Astribank drivers loading for those who do care. * xpp/utils/genzaptelconf: Merging 1.2 changes of genzaptelconf: * -l (list) now works reliebly. * Cleared some leftover writes to standard output. * Fixed xpp spans sort order. 2007-01-31 14:12 +0000 [r2039-2044] Kevin P. Fleming * pciradio.c, zttool.c, wct4xxp/base.c, ztcfg-dude.c, Makefile, zaptel.c, torisatool.c, torisa.c, tonezone.c, ztdynamic.c, wcfxsusb.c, ztmonitor.c, makefw.c, build_tools/genmodconf, ztcfg.c, wct1xxp.c, wctdm.c, ztd-eth.c, /, wcusb.c, wctdm24xxp.c, wcfxo.c, tor2.c: Merged revisions 2043 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2043 | kpfleming | 2007-01-31 08:06:34 -0600 (Wed, 31 Jan 2007) | 4 lines fix up author email addresses use the kernel's built-in support for module aliases instead of manually doing it in modprobe.conf or equivalent add wctdm8xxp alias for wctdm24xxp ........ * wct4xxp/base.c, /: Merged revisions 2038 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2038 | kpfleming | 2007-01-30 19:33:25 -0600 (Tue, 30 Jan 2007) | 2 lines final fix for non-hotplug firmware loading ........ 2007-01-30 18:11 +0000 [r2019] Russell Bryant * /: Blocked revisions 2018 via svnmerge ........ r2018 | russell | 2007-01-30 12:11:11 -0600 (Tue, 30 Jan 2007) | 5 lines - Make the build of xpp occur with 2.6.8 or above, instead of 2.6.10 - remove the installation of the userspace tools - remove the architecture check (issue #8894, tzafrir) ........ 2007-01-29 19:21 +0000 [r1998] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1996 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1996 | kpfleming | 2007-01-29 13:20:32 -0600 (Mon, 29 Jan 2007) | 2 lines _really_ fix the non-hotplug firmware case ........ 2007-01-27 16:16 +0000 [r1988] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1987 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1987 | kpfleming | 2007-01-27 10:14:54 -0600 (Sat, 27 Jan 2007) | 2 lines properly reference the size symbol produced by objcopy ........ 2007-01-26 15:27 +0000 [r1969-1982] Matt Frederickson * wctdm24xxp.c: Add additional product support. 2007-01-24 13:11 +0000 [r1954] Kevin P. Fleming * /, wcfxo.c: Merged revisions 1953 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1953 | kpfleming | 2007-01-24 07:01:36 -0600 (Wed, 24 Jan 2007) | 2 lines might as well fix this driver too :-) ........ 2007-01-24 00:38 +0000 [r1944] Russell Bryant * Makefile, /: Merged revisions 1943 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1943 | russell | 2007-01-23 18:35:48 -0600 (Tue, 23 Jan 2007) | 3 lines If the xpp pieces get built, install the userspace utilities as well. (issue #8894) ........ 2007-01-23 21:49 +0000 [r1937] Matt Frederickson * wcte11xp.c, wct1xxp.c, wctdm.c, /, wctdm24xxp.c: Merged revisions 1936 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1936 | mattf | 2007-01-23 15:28:14 -0600 (Tue, 23 Jan 2007) | 3 lines Make sure we don't clear the interrupt before we might have received it in shared interrupt line scenarios. ........ 2007-01-23 15:39 +0000 [r1921-1924] Kevin P. Fleming * /, ztd-eth.c: Merged revisions 1923 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1923 | kpfleming | 2007-01-23 09:39:12 -0600 (Tue, 23 Jan 2007) | 2 lines use the proper function prototype for 2.6 kernels ........ * xpp/xpp_zap.c, pciradio.c, wctdm.c, /, zaptel.c, torisa.c, wctdm24xxp.c: Merged revisions 1920 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1920 | kpfleming | 2007-01-23 09:25:42 -0600 (Tue, 23 Jan 2007) | 2 lines clean up various compiler warnings ........ 2007-01-23 01:58 +0000 [r1913] Joshua Colp * /, zonedata.c: Merged revisions 1912 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1912 | file | 2007-01-22 20:57:00 -0500 (Mon, 22 Jan 2007) | 2 lines Fix Congestion tone for Australia. (issue #8891 reported by JT) ........ 2007-01-22 22:43 +0000 [r1892-1899] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1898 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1898 | kpfleming | 2007-01-22 16:43:06 -0600 (Mon, 22 Jan 2007) | 3 lines use better definition for linked-in firmware data ensure that hotplug-loaded firmware is released when we are finished with it ........ * wct4xxp/base.c, /: Merged revisions 1891 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1891 | kpfleming | 2007-01-22 15:12:35 -0600 (Mon, 22 Jan 2007) | 2 lines make the non-hotplug firmware case actually compile again ........ 2007-01-22 21:04 +0000 [r1889] Jason Parker * Makefile: Fix typo in Makefile Issue 8885, patch by James 2007-01-22 20:59 +0000 [r1878-1887] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1886 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1886 | kpfleming | 2007-01-22 14:58:30 -0600 (Mon, 22 Jan 2007) | 2 lines might be good if i committed the working version of this code... ........ * wct4xxp/vpm450m.c, wct4xxp/base.c, wct4xxp/vpm450m.h, /: Merged revisions 1877 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1877 | kpfleming | 2007-01-22 12:58:34 -0600 (Mon, 22 Jan 2007) | 2 lines update to PR47 Octasic API kit, and use new GetCapacityPins API call to only attempt downloading the correct firmware for the modules we find ........ 2007-01-18 23:50 +0000 [r1855] Matt Frederickson * wct4xxp/base.c: Backporting revs 1812 and 1854 into 1.4. 2007-01-16 23:45 +0000 [r1836] Jason Parker * /, fxsdump.c (removed): Merged revisions 1835 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1835 | qwell | 2007-01-16 17:44:28 -0600 (Tue, 16 Jan 2007) | 6 lines Remove file that was never (literally) able to compile - dates all the way back to zaptel 0.8.0 If we can figure out where this coeffs.h comes from, I suppose it would be easy to add this back in the future. Issue 8493 ........ 2007-01-16 04:38 +0000 [r1820-1828] Kevin P. Fleming * wct4xxp/vpm450m.c, build_tools/make_firmware_object, /: Merged revisions 1826-1827 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1826 | kpfleming | 2007-01-15 22:30:00 -0600 (Mon, 15 Jan 2007) | 3 lines make the 'firmware object' files load the firmware blobs as read-only data simplify the code that uses the firmware objects a bit ........ r1827 | kpfleming | 2007-01-15 22:37:06 -0600 (Mon, 15 Jan 2007) | 2 lines use latest Octasic API tag ........ * wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c, Makefile, build_tools/make_firmware_object (added), wct4xxp/Makefile, wct4xxp/vpm450m.h, /, wct4xxp, wct4xxp/fw2h.c (removed): Merged revisions 1818 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1818 | kpfleming | 2007-01-15 19:28:54 -0600 (Mon, 15 Jan 2007) | 3 lines eliminate the fw2h tool, and instead use objcopy to directly make object files from the firmware binary files pass HOTPLUG_FIRMWARE down to the module build so that we can avoid various compiler warnings ........ 2006-12-30 19:11 +0000 [r1774] Joshua Colp * Makefile, /: Merged revisions 1773 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1773 | file | 2006-12-30 14:09:50 -0500 (Sat, 30 Dec 2006) | 2 lines Specify full path to restorecon instead of assuming it will be available from what is in $PATH. (issue #8671 reported by djflux) ........ 2006-12-27 22:49 +0000 [r1767] Kevin P. Fleming * xpp/xpp_zap.c, xpp/card_fxo.c, /, xpp/card_fxs.c, xpp/xpp_usb.c: Merged revisions 1766 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1766 | kpfleming | 2006-12-27 16:47:19 -0600 (Wed, 27 Dec 2006) | 2 lines remove pointless duplication of ZAPTEL_VERSION that causes these modules to be rebuilt every time a commit is made to any part of Zaptel ........ 2006-12-23 Kevin P. Fleming * Zaptel 1.4.0 released. 2006-12-18 14:01 +0000 [r1726-1729] Tzafrir Cohen * xpp/xdefs.h, xpp: r1724@boole: tzafrir | 2006-12-18 15:55:59 +0200 Code is 2.6-specific anyway, no need for an explicit test. * xpp, xpp/xpp_usb.c: r1723@boole: tzafrir | 2006-12-18 15:54:04 +0200 Use the internal version (without locking) of usb_reset_device. Intended for kernel 2.6.9 and earlier. Finally full support of 2.6.8 and 2.6.9. r2937: diego | 2006-12-17 14:20:36 +0200 r2940: tzafrir | 2006-12-17 16:32:51 +0200 * xpp/xpp_zap.c, xpp: r1722@boole: tzafrir | 2006-12-18 15:50:36 +0200 xpp_zap.c: Better error hanlding during module init. orig r2948: oron | 2006-12-17 18:54:00 +0200 * xpp, xpp/xpd.h: r1721@boole: tzafrir | 2006-12-18 15:46:42 +0200 Assume every 2.6.9 kernel is a later RHEL4 kernel, which backported the gfp_t typedef. Either way we break some systems). r2938: diego | 2006-12-17 14:22:16 +0200 2006-12-15 13:50 +0000 [r1716-1719] Tzafrir Cohen * xpp/xpp_zap.c, xpp/card_fxo.c, xpp/README.Astribank, xpp/utils/xpp_fxloader, xpp/utils/genzaptelconf, xpp: Sync to xpp RELEASE-1.2.0 2933. r2847@boole: diego | 2006-12-03 10:33:00 +0200 added documentation which explains which packages are needed to build the drivers on different distributions. r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200 README.Astribank: A typo in the sample config (changeset:2861). r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200 Re-accept changeset:2832 after all. r2892@boole: tzafrir | 2006-12-08 02:46:07 +0200 Merge genzaptelconf changeset:2866 from trunk: * Zapata comment on unidentified channel goes to $zapata_file * Correct pattern for Sangoma A200 card's channels. r2893@boole: tzafrir | 2006-12-08 03:11:37 +0200 genzaptelconf: * Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel. * Do print the original line for every channel. r2909@boole: tzafrir | 2006-12-10 20:03:59 +0200 Add some sleeps in older kernels in the firmware loading script. r2932@boole: tzafrir | 2006-12-14 17:30:12 +0200 Make the warning about a call to off-hook FXO debug. At least if we cannot suppress it at module load time. r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200 Don't redefine 'bool' on newer kerenls to fix building with kernel 2.6.19. Taken from Digium tree. (from changeset:2930) * xpp/firmwares/FPGA_1151.hex, xpp/firmwares/FPGA_FXS.hex, xpp: r1715@boole: tzafrir | 2006-12-15 14:35:26 +0200 Firmwares to fix caller ID detection timing issue. 2006-12-12 Kevin P. Fleming * Zaptel 1.4.0-beta3 released. 2006-12-11 19:07 +0000 [r1698-1701] Kevin P. Fleming * /, xpp/xdefs.h: Merged revisions 1700 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1700 | kpfleming | 2006-12-11 13:05:43 -0600 (Mon, 11 Dec 2006) | 2 lines kernel 2.6.19 now has a type called 'bool', although it's not completely implemented so there will still be some warnings when building xpp against 2.6.19 kernel headers ........ * pciradio.c, wct4xxp/base.c, wcte11xp.c, wct1xxp.c, wctdm.c, /, torisa.c, wcusb.c, wctdm24xxp.c, zaptel.h, tor2.c, wcfxo.c: Merged revisions 1697 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1697 | kpfleming | 2006-12-11 12:27:15 -0600 (Mon, 11 Dec 2006) | 2 lines kernel 2.6.19 API changes compatibility ........ 2006-12-06 23:25 +0000 [r1687] Joshua Colp * Makefile, ztcfg-dude.c, /: Merged revisions 1686 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1686 | file | 2006-12-06 18:22:11 -0500 (Wed, 06 Dec 2006) | 2 lines Link ztcfg-dude against stdc++ so we get needed functions. (issue #8494 reported by Romik) ........ 2006-12-01 00:13 +0000 [r1673-1678] Tzafrir Cohen * xpp/card_fxo.c, xpp: r1671@boole: tzafrir | 2006-12-01 01:30:24 +0200 r2806@boole: oron | 2006-11-27 16:54:06 +0200 Fixed panic in ticket:147 merged code from changeset:2802 changeset:2804 * xpp/card_fxo.c, xpp: r1670@boole: tzafrir | 2006-12-01 01:29:57 +0200 r2794@boole: oron | 2006-11-26 14:24:15 +0200 Remove all SOFT_RING code (unused for a long time). * xpp/xpp_zap.c, xpp, xpp/xpd.h: r1668@boole: tzafrir | 2006-11-30 23:48:25 +0200 r2832@boole: tzafrir | 2006-11-29 11:06:06 +0200 Add parameter xpp_ec to the module xpp (xpp_zap.c). Defaults to 1. If 0, module will use Zaptel echo canceller even with XPP_EC_CHUNK. Parameter is read-only for now: cannot be set through /sys/modules. (Merge of changeset:2830) * xpp/utils/genzaptelconf, xpp: r1667@boole: tzafrir | 2006-11-30 23:46:46 +0200 r2831@boole: tzafrir | 2006-11-29 11:05:08 +0200 genzaptelconf: A list of countries for which to use busydetect. (backport of changeset:2829) * xpp/init_card_3_23, xpp/init_card_4_23, xpp/calibrate_slics, xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/Makefile, xpp/Makefile, xpp/utils/genzaptelconf, xpp: r1666@boole: tzafrir | 2006-11-30 23:46:11 +0200 r2817@boole: oron | 2006-11-28 13:39:47 +0200 Maintenance branch for asterisk-1.2.x 2006-11-30 00:24 +0000 [r1664] Jason Parker * build_tools/genmodconf, /: Merged revisions 1663 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1663 | qwell | 2006-11-29 18:23:33 -0600 (Wed, 29 Nov 2006) | 2 lines Fix issue that was discovered by using dash as /bin/sh instead of bash. ........ 2006-11-29 22:27 +0000 [r1661] Kevin P. Fleming * /, zconfig.h: Merged revisions 1660 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1660 | kpfleming | 2006-11-29 16:24:07 -0600 (Wed, 29 Nov 2006) | 2 lines clarify the BOOST_RINGER compile-time option ........ 2006-11-29 17:31 +0000 [r1656-1658] Matt Frederickson * ztcfg.c: Fix for #7860. Make sure we don't allow channel 16 to be clear if it's in E1/CAS mode. * zttool.c: Fix for (#8300) 2006-11-26 08:12 +0000 [r1642] Russell Bryant * wcte11xp.c, /: Merged revisions 1641 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1641 | russell | 2006-11-26 03:10:22 -0500 (Sun, 26 Nov 2006) | 3 lines Remove a misplaced semicolon which caused some debug output to be printed regardless of the debug setting. (issue #8414, gknispel_proformatique) ........ 2006-11-22 23:30 +0000 [r1637] Matt Frederickson * zaptel.c: Update for #8403 2006-11-21 15:19 +0000 [r1623] Tzafrir Cohen * xpp/utils/Makefile: Typo: SBINDIR -> BINDIR . 2006-11-17 17:47 +0000 [r1614-1615] Jason Parker * Makefile: Fix an issue (8071) where wct4xxp wasn't being put into /etc/modprobe.d/zaptel (or similar). There should be no reason that adding wct4xxp to the MODULES variable at this point in the Makefile, would cause any harm. Somebody please correct me if I'm wrong... (Fix is slightly different from 1.2) * /: Blocked revisions 1613 via svnmerge ........ r1613 | qwell | 2006-11-17 11:43:12 -0600 (Fri, 17 Nov 2006) | 5 lines Fix an issue (8071) where wct4xxp wasn't being put into /etc/modprobe.d/zaptel (or similar). There should be no reason that adding wct4xxp to the MODULES variable at this point in the Makefile, would cause any harm. Somebody please correct me if I'm wrong... ........ 2006-11-17 04:12 +0000 [r1611] BJ Weschke * /, zaptel.c: Merged revisions 1610 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1610 | bweschke | 2006-11-16 23:06:05 -0500 (Thu, 16 Nov 2006) | 4 lines mattf - I'm not sure if this is where you wanted the definitions placed. If not, please fix, but this gets the compiles working again for now. ........ 2006-11-17 00:52 +0000 [r1606-1609] Matt Frederickson * zaptel.c: Fix for 7991. * zaptel.c: Fix for 7769 2006-11-11 14:34 +0000 [r1590] Tzafrir Cohen * xpp/init_card_3_23, xpp/init_card_4_23: init_card[34]_23: merge from 2654,2655. * Redirect stderr to /dev/null. Without any redirection, it may fail with exitval=4 . Probably, fd 2 is closed and the shell (or sed which is used in the scripts) tries to write to it (or do some other I/O related syscall) which fails. * make XPP_BASE handling identical in the two scripts. 2006-11-09 15:58 +0000 [r1576] Russell Bryant * Makefile: fix an expression in the install target (issue #8321, tzafrir) 2006-11-08 23:06 +0000 [r1574] Kevin P. Fleming * wct4xxp/vpm450m.c, wct4xxp/base.c, wcte11xp.c, wct4xxp/vpm450m.h, /: Merged revisions 1573 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1573 | kpfleming | 2006-11-08 17:04:33 -0600 (Wed, 08 Nov 2006) | 3 lines clean up recent VPMOCT changes add support for Infineon FALC rev 2.2 ........ 2006-11-08 16:01 +0000 [r1571] Tzafrir Cohen * xpp/utils/print_modes.c: Fixed a typo in the "wctdm reimplementation". 2006-11-08 03:44 +0000 [r1566-1568] Kevin P. Fleming * wct4xxp, configure, configure.ac, makeopts.in: update configure script to add searching for libusb update svn:ignore for new firmware header file names 2006-11-06 22:48 +0000 [r1565] Matt Frederickson * wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c, wct4xxp/Makefile, wct4xxp/vpm450m.h, wct4xxp/OCT6114-64D.ima (added): Add support into 1.4 branch for new VPMOCT64 as well 2006-11-06 19:07 +0000 [r1557-1558] Tzafrir Cohen * xpp/init_card_3_23, xpp/init_card_4_23: Fixes for card init scripts from rev 2633: * Don't log card init scripts to /tmp/results . * Document how to trace, though. * init_card_4_23: don't re-open the slics file. * xpp/xpp_zap.c, xpp/utils/print_modes.c, xpp/utils/xpp_fxloader.usermap, xpp/firmwares/FPGA_1151.hex (added), xpp/xpp_zap.h, xpp/slic.c (removed), xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex (added), xpp/firmwares/USB_1130.hex (added), xpp/utils/USB_1130.hex (removed), xpp/utils/FPGA_FXS.hex (removed), xpp/slic.h (removed), xpp/init_data_3_20.cmd (removed), xpp/xpd.h, xpp/xproto.h, xpp/firmwares/USB_1150.hex (added), xpp/init_card_4_23 (added), xpp/calibrate_slics, xpp/xbus-core.c, xpp/init_data_4_19.cmd (removed), xpp/utils/adj_clock.c (added), xpp/utils/xpp_fxloader, xpp/xbus-core.h, xpp/xdefs.h, xpp, xpp/utils, xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/card_fxo.h, xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8 (added), xpp/card_fxs.h, xpp/card_global.h, xpp/init_data_4_20.cmd (removed), xpp/init_card_3_23 (added), xpp/initialize_registers (removed), xpp/init_data_3_19.cmd (removed), xpp/firmwares/LICENSE.firmware (added), xpp/firmwares/README (added), xpp/utils/USB_8613.hex (removed), xpp/LICENSE.firmware (removed), xpp/utils/genzaptelconf, xpp/firmwares (added), xpp/xpp_usb.c: Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2 * Should build well. Almost final. * genzaptelconf: Also work when zap_autoreg=0 * README.Astribank updated for rev. 1.2. * xpp/utils/Makefile: Use $< with cc -c * Get xpp/utils configuration from autoconf (without changesin top dir) 2006-11-01 19:04 +0000 [r1547] Russell Bryant * Makefile, wct4xxp/Makefile, configure, configure.ac, xpp/utils/Makefile, makeopts.in: instead of setting HOSTCC and CC directly in the Makefile, use the information provided by the configure script (issue #8055, tzafrir) 2006-10-31 06:26 +0000 [r1543] Russell Bryant * Makefile, /: Merged revisions 1542 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1542 | russell | 2006-10-31 01:25:16 -0500 (Tue, 31 Oct 2006) | 3 lines fix the installation of wct4xxp for 2.4 kernels (issue #7964, fixed by gkloepfer, but the committed fix is slightly modified) ........ 2006-10-26 00:03 +0000 [r1536] Kevin P. Fleming * wctdm.c, /, wctdm24xxp.c: Merged revisions 1534-1535 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1534 | kpfleming | 2006-10-25 18:54:41 -0500 (Wed, 25 Oct 2006) | 2 lines do ProSLIC 3215 check properly ........ r1535 | kpfleming | 2006-10-25 19:00:31 -0500 (Wed, 25 Oct 2006) | 2 lines do ProSLIC 3215 check properly in this driver too ........ 2006-10-24 01:33 +0000 [r1528-1530] Russell Bryant * pciradio_vhdl.tar.gz (removed), raddiag.tar.gz (removed): Both of these files are corrupted and can not be decompressed, so they need to be re-added. (issue #8134) * /, doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: Merged revisions 1527 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1527 | russell | 2006-10-23 21:08:27 -0400 (Mon, 23 Oct 2006) | 3 lines convert some characters of ISO8859-1 encoding to be UTF-8 (issue #8200, jcollie) ........ 2006-10-20 01:26 +0000 [r1520] Joshua Colp * /, torisa.c, zaptel.h, zconfig.h: Merged revisions 1519 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1519 | file | 2006-10-19 21:23:26 -0400 (Thu, 19 Oct 2006) | 2 lines Later distros have now taken to removing this file as it has been deprecated for awhile now... so on kernels 2.6.18 or higher we can safely not include it. (props to jsmith) ........ 2006-10-18 02:15 +0000 [r1518] Russell Bryant * /: Blocked revisions 1517 via svnmerge ........ r1517 | russell | 2006-10-17 22:14:43 -0400 (Tue, 17 Oct 2006) | 3 lines remove ROOT_PREFIX, and move INSTALL_PREFIX to before the first time it is used (issue #7913, darren1713) ........ 2006-10-17 Kevin P. Fleming * Zaptel 1.4.0-beta2 released. 2006-10-17 16:40 +0000 [r1507] Russell Bryant * wct4xxp/base.c: Set the readbuf size to be the same size of the variable, readsize. This buffer was 31 bytes, while the readsize could be 32 bytes, causing a read into invalid memory. (issue #8155, araasch) 2006-10-11 17:25 +0000 [r1500] Joshua Colp * Makefile: Copy to both directories, not just the first one. 2006-10-02 23:50 +0000 [r1490] Matt O'Gorman * wctdm.c, wctdm24xxp.c: add support for setting gain registers on the fxo and fxs modules. 2006-09-20 Kevin P. Fleming * Zaptel 1.4.0-beta1 released.