2007-12-13 Kevin P. Fleming * Zaptel 1.4.7.1 released 2007-12-13 Kevin P. Fleming * wcte12xp.c: add new product support 2007-11-27 Matthew Fredrickson * Zaptel 1.4.7 released. 2007-11-22 00:29 +0000 [r3242-3245] Matthew Fredrickson * wct4xxp/base.c: Make sure that's disabled until I retest that * wctdm24xxp/wctdm24xxp.h, wctdm24xxp/base.c, /: Merged revisions 3243 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3243 | mattf | 2007-11-21 17:51:48 -0600 (Wed, 21 Nov 2007) | 1 line Add new product support ........ * wctc4xxp/base.c, /: Merged revisions 3241 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3241 | mattf | 2007-11-21 16:45:32 -0600 (Wed, 21 Nov 2007) | 1 line Transcoder driver updates. Fixes G.723 no audio issues with latest drivers ........ 2007-11-14 15:22 +0000 [r3233] Tzafrir Cohen * xpp/xpp_zap.c, xpp/.version, xpp/utils/print_modes.c, xpp/init_card_3_29, /, xpp/init_card_4_29, xpp/Changelog_xpp: xpp r5010: * Fix a deadlock spotted on some SMP installations. * Improve (reduce) signal attenuation on FXO ports. * Increase FXS ring detect debounce interval. Merged revisions 3229-3232 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-11-11 01:22 +0000 [r3223-3226] Tzafrir Cohen * Makefile, tor2ee.c (removed): tor2ee doesn't build. Remove it. Closes #10278. * /, ztmonitor.c: ztmonitor: Get rid of a pointless static buffer and strcpy. And also give a more useful conversion message. Merged revisions 3222 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-11-08 21:48 +0000 [r3221] Tilghman Lesher * zttool.c: Add dependency on newt Reported by: dimas Patch by: tilghman Closes issue #11199 2007-11-07 20:18 +0000 [r3218-3220] Tzafrir Cohen * Makefile: Don't try to generate bindir and mandir if there are no binaries to install (this causes an invalid install command). * build_tools: make_firmware_object is now generated. Ignore it. * xpp/utils/zconf/Zaptel/Chans.pm, /, xpp/utils/genzaptelconf, xpp/utils/zconf/Zaptel/Hardware/PCI.pm: * zaptel-perl, genzaptelconf: Detect and list Rhino cards. * zaptel-perl: Fix reporting of empty slots in analog Digium cards. * genzaptelconf: More readable case-s. Merged revisions 3217 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-11-06 21:14 +0000 [r3216] Matthew Fredrickson * wctdm24xxp/base.c, /: Merged revisions 3215 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3215 | mattf | 2007-11-06 15:13:09 -0600 (Tue, 06 Nov 2007) | 1 line Cross port fxo line voltage monitoring patch from wctdm to wctdm24xxp ........ 2007-11-03 16:23 +0000 [r3211] Matthew Fredrickson * firmware/Makefile, wctc4xxp/base.c: Major update for tc4xxp driver. Fixes many outstanding issues related to channel lockups, etc. It also raises the maximum channel count for g.729 to 120 channels. 2007-10-31 21:09 +0000 [r3206] Mark Michelson * sethdlc-new.c, /, sethdlc.c: Merged revisions 3205 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3205 | mmichelson | 2007-10-31 16:08:15 -0500 (Wed, 31 Oct 2007) | 5 lines Fixed potential buffer overflow. See AST-2007-024 for more details ........ 2007-10-31 13:10 +0000 [r3202] Tzafrir Cohen * /: Blocking merge of r3201 which is a backport from 1.4 . 2007-10-28 18:26 +0000 [r3198] Tzafrir Cohen * firmware/Makefile, build_tools/make_firmware_object (removed), configure, build_tools/make_firmware_object.in (added), configure.ac: Firmware object file building does not depend anymore on another object to be linked into the same module. That dependency existed solely for checking target binary properties in make_firmware_object . Those properties are now checked in autoconf. 2007-10-27 16:33 +0000 [r3195] Tzafrir Cohen * Makefile, configure, configure.ac, makeopts.in: Detect SELinux support (for install target) in autoconf. Can be manually overriden in configure or make. 2007-10-26 15:36 +0000 [r3190] Tzafrir Cohen * ztdummy.c, wct4xxp/base.c, wcte11xp.c, wcte12xp.c, wctdm.c, wctdm24xxp/base.c, tor2.c, zaptel-base.c: If you depend on anything that is not in /usr/include/zaptel , you must build with the local zaptel.h . Otherwise you may mix two versions of Zaptel . 2007-10-26 15:12 +0000 [r3189] Matthew Fredrickson * wctdm24xxp/base.c, /: Merged revisions 3188 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3188 | mattf | 2007-10-26 10:08:37 -0500 (Fri, 26 Oct 2007) | 1 line Another clock polarity update. To fix garbage audio on some systems with the wctdm24xxp driver and VPMADT032 ........ 2007-10-26 13:34 +0000 [r3185] Tzafrir Cohen * wcfxsusb.h (removed), Makefile, wcfxsusb.c (removed): Remove obsolete drivers (replaced by wcusb). 2007-10-18 22:56 +0000 [r3170] Jason Parker * wct4xxp/base.c, /: Merged revisions 3169 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3169 | qwell | 2007-10-18 17:56:14 -0500 (Thu, 18 Oct 2007) | 4 lines Correct the name of the wct4xxp driver. Issue 11030 ........ 2007-10-18 Matthew Fredrickson * Zaptel 1.4.6 released. 2007-10-18 20:53 +0000 [r3161] Matthew Fredrickson * wct4xxp/base.c: Make sure we only increment timingslips when there actually are timing slips, instead of everytime we service the framer 2007-10-18 20:32 +0000 [r3154-3158] Tzafrir Cohen * xpp/utils/zconf/Zaptel/Chans.pm, /: Fix zaptel_hardware's behaviour for unknown span types. Merged revisions 3157 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 * xpp/.version, /, xpp/init_card_4_29, xpp/Makefile, xpp/Changelog_xpp, xpp/utils/zconf/Zaptel/Hardware/USB.pm, xpp/utils/zconf/Zaptel/Xpp.pm: * zaptel-perl should not panic when there is no /proc/bus/usb (Closes #11020). * Don't build metering by default for now. * And this is xpp rev 4900. * Make opermode work again. Merged revisions 3152-3153 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-10-16 20:25 +0000 [r3143-3147] Tzafrir Cohen * README, /: Update README yet again. * xpp/xpp_zap.c, xpp/.version, xpp/card_pri.c, xpp/card_fxo.c, xpp/firmwares/USB_FW.hex (added), xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/zaptel_hardware, xpp/xproto.c, xpp/Changelog_xpp (added), xpp/firmwares/USB_1130.hex (removed), xpp/utils/zconf/Zaptel/Hardware/USB.pm, xpp/firmwares/USB_1140.hex (removed), xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/xpd.h, xpp/xproto.h, xpp/firmwares/USB_1150.hex (removed), xpp/utils/zconf/Zaptel/Hardware.pm, xpp/ChangeLog (removed), xpp/utils/zt_registration, xpp/xbus-core.c, /, xpp/utils/xpp_fxloader, xpp/utils/zaptel_drivers (added), xpp/utils/fpga_load.c, xpp/xdefs.h, xpp/utils/zconf/Zaptel/Xpp.pm, xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/xpp_usb.c: xpp r4892: * Zaptel/Hardware perl modules: - Use sysfs directly. Don't rely on lspci/lsusb. - Each device has a description and driver name. - Zaptel::Hardware::drivers() to show the list of required drivers for this system (see zaptel_drivers). - zaptel_hardware shows a description and a (suggested?) driver. * zt_registration sorts by Serial first and only then by connector. * USB_FW.hex replaces all the USB_11x0.hex . - Separate USB interface for the management processor. - Hence fpga_load can now work even with drivers loaded. * Fix firmware upgrading. * Fix manual firmware loading while auto-loading. Merged revisions 3142 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-10-16 16:40 +0000 [r3139] Kevin P. Fleming * /: use latest Octasic API release 2007-10-12 22:25 +0000 [r3133] Matthew Fredrickson * wctdm24xxp/base.c, /: Merged revisions 3132 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3132 | mattf | 2007-10-12 17:19:58 -0500 (Fri, 12 Oct 2007) | 1 line Fix for false power alarms, as well as a clock polarity issue ........ 2007-10-07 15:05 +0000 [r3121] Tzafrir Cohen * README: Update the links section (including an on-line HTML copy of the README). 2007-10-04 18:06 +0000 [r3113] Tzafrir Cohen * README, contrib (removed), /, build_tools/install_prereq (removed), install_prereq (added): * install_prereq is not a build script. Move it to main directory (which is our scripts directory). * Don't run/print install command when there's nothing to install. * Fix install_prereq command in README . Merged revisions 3109-3112 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-10-03 17:05 +0000 [r3106] Tzafrir Cohen * xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex, xpp/utils/hexfile.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h, xpp/xpd.h, xpp/ChangeLog, xpp/xbus-core.c, xpp/init_card_4_28 (removed), xpp/init_card_4_29 (added), xpp/init_card_6_28 (removed), xpp/init_card_6_29 (added), xpp/utils/fpga_load.c, xpp/xdefs.h, xpp/utils/zapconf, xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c, xpp/xbus-sysfs.c, xpp/utils/zaptel_hardware, xpp/utils/Makefile, xpp/init_card_3_28 (removed), xpp/utils/zt_registration, xpp/init_card_3_29 (added), /, xpp/init_card_7_28 (removed), xpp/init_card_7_29 (added), xpp/init_card_9_28 (removed), xpp/init_card_9_29 (added), xpp/utils/genzaptelconf, xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: New xpp release: r4786: * New firmware protocol version: 2.9 . * fpga_load: initial clean-ups before interface split. * genzaptelconf: Don't leave an empty directory behind (4784) * Increase xpp poll_timeout to 1000ms - useful for CentOS 4 (r4781). * Fix initialization anoyance: if AB don't answer to polls, don't waitfor_xpds, and show no waiting XPDs (r4725). * Disable dtmf_detect by default once again (r4712). * Don't check twice for asterisk to stop. The second test was done while Asterisk was still stopping (r4708). * Support building the kernel with M= instead of with SUBDIRS= , as used in some newer build systems (r4677). Merged revisions 3105 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-10-01 08:21 +0000 [r3100] Tzafrir Cohen * /: No need to met those to changes back into 1.4 . 2007-09-29 01:57 +0000 [r3097] Tzafrir Cohen * README: * Document the usage of ./configure . * spacing. 2007-09-26 20:11 +0000 [r3094] Tilghman Lesher * contrib/scripts/install_prereq (added), contrib (added), contrib/scripts (added): Add a script to load package prerequisites (closes issue #10523) 2007-09-23 00:53 +0000 [r3087-3090] Tzafrir Cohen * zaptel.init: Ignore errors from fxotune -s. The channel can be used e.g. if Asterisk is already running. * xpp/ChangeLog, /, xpp/card_fxs.c: Re-disable dtmf_detection of the FXS module (From xpp rev 4712). Merged revisions 3084 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-09-22 20:18 +0000 [r3079-3082] Matthew Fredrickson * wct4xxp/base.c: Make some improvements in how we do event retrieval * wct4xxp/base.c: Disable that for now (DTMF detection) 2007-09-22 08:07 +0000 [r3070-3076] Tzafrir Cohen * Makefile.kernel26: Makefile Automatically enabling Zaptel MMX support. Disabled by default for now. * To enable, build with ZAPTEL_MMX_AUTO=yes (or any other non-empty value) * There is a white list of configuration values (without the prefix CONFIG_). One of them needs to be set in order for CONFIG_ZAPTEL_MMX to be enabled. * Only adds support for kernel 2.6 . If anybody finds a simple way to do the same with 2.4 - patches are welcomes. * ztdummy.c: Sort out print messages in ztdummy: * Proper priority to every message. * Remove a useless global. * zaptel.init: fxotune must be run after ztcfg. 2007-09-20 18:42 +0000 [r3067] Jason Parker * Makefile: Remove DESTDIR from CONFIG_FILE, since we don't want DESTDIR passed in as part of the -DZAPTEL_CONFIG. Closes issue #10764, pointed out by cabal95 2007-09-20 16:52 +0000 [r3064] Matthew Fredrickson * wctdm24xxp/base.c: Disable native bridging pending resolving of some issues 2007-09-19 11:13 +0000 [r3061] Tzafrir Cohen * ztcfg.c: Clarify that ztcfg prints the channel map before actually configuring channels. 2007-09-18 10:21 +0000 [r3051-3056] Tzafrir Cohen * /, xpp/Makefile: Support building the kernel with M= instead of with SUBDIRS= , as used in some newer build systems. From xpp r4677. Merged revisions 3055 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 * zaptel-base.c: Give proper type for printk messages. * zaptel-base.c: Fix the ioctl ZT_CHANDIAG and enable it by default. (Backport changeset 2384 from trunk) 2007-09-17 19:32 +0000 [r3048] Tilghman Lesher * zaptel.h, zaptel-base.c: Revert previous change on spaninfo and institute an ABI compatible call, to avoid breaking zaptel ABI compatibility between releases (closes issue #10745) 2007-09-16 14:55 +0000 [r3044-3045] Tzafrir Cohen * fxotune.c, zaptel.init: * Run fxotune automatically on startup. * Make fxotune -s less verbose by default so it won't make noise for the init.d script. * ztdummy.c, README: * Document ztdummy changes. * It's a (ztdummy) clock source, not ztdummy type. 2007-09-15 20:40 +0000 [r3041] Matthew Fredrickson * ztcfg.c: Remove silly CAS signalling conflicts... patch 2007-09-15 20:21 +0000 [r3020-3038] Tzafrir Cohen * ztdummy.c: Include support for high-resolution timers for linux >= 2.6.22 (#10314). Changes from the patch: * Only support kernels >= 2.6.22, as hrtimer_forward is only exported as of that version. * Adapted to my recent changes in ztdummy.c . * Use ZAPTEL_TIME_NS instead of ZAPTEL_RATE * Simplified ticks debug statement. Will only be used if debug=2 or debug=3 . * ztdummy.c: Include the type of the ztdummy module in the desc (span description) filed. To check what type of module you built, use: strings ztdummy.ko | grep type tr '%' '\n' * zaptel.init: No need for a duplicate list of modules. * /, zaptel.init, zaptel.sysconfig: The order of modules load counts, if you have multiple cards. Merged revisions 3015 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-09-13 21:33 +0000 [r3014] Joshua Colp * /, zaptel.init, zaptel.sysconfig: Merged revisions 3013 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3013 | file | 2007-09-13 18:31:30 -0300 (Thu, 13 Sep 2007) | 2 lines Add TE120P to init script. ........ 2007-09-11 18:10 +0000 [r3011-3012] Russell Bryant * wctdm24xxp/wctdm24xxp.h, wctdm24xxp/base.c: After committing the patch to make ringdebounce a module parameter in wctdm, I went ahead and made the same change to wctdm24xxp. *** Note that there is a discrepancy here. wctdm uses 64 ms as the default ring debounce value while this module uses 128 ms. I'm not sure which one is more appropriate, but they should certainly default to the same thing. * wctdm.c: Make ringdebounce a module parameter (closes issue #10218, pnlarsson 2007-09-09 23:42 +0000 [r3006-3008] Tzafrir Cohen * zaptel.sysconfig: Also probe for wcte12xp by default (before wcte11xp). * xpp/.version, xpp/utils/xpp_sync, xpp/card_pri.c (added), xpp/firmwares/FPGA_1141.hex, xpp/firmwares/FPGA_1151.hex, xpp/README.metering, xpp/card_pri.h (added), xpp/README.Astribank, xpp/Makefile, xpp/utils/Makefile, xpp/utils/example_default_zaptel (added), xpp/firmwares/FPGA_FXS.hex, xpp/xpd.h, xpp/xproto.h, xpp/init_card_4_26, xpp/ChangeLog, /, xpp/init_card_9_26 (added), xpp/utils/genzaptelconf, xpp/utils/zapconf, xpp/utils: xpp.r4584: * New firmware to fix FXS leds irregularities. * Less noise at build time - don't echo version, test compile only once. * zapconf can generate users.conf snippets. * xpd_pri: initial version. * ignore perlcheck. Merged revisions 3004-3005 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-09-08 12:08 +0000 [r2995-2999] Tzafrir Cohen * Makefile, configure, configure.ac, makeopts.in: * Let autoconf figure out the switches for asciidoc. * Remove some leftover set -x from previous debug... * Makefile, /, xpp: Allow overriding the asciidoc command. This allows using asciidoc < 7. Merged revisions 2997 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 * zttest.c: * Improve accuracy of zttest by using floats (#10312). * Account only for the time of actually waiting for the clock. * Clarify message for zttest -v . * Don't print some digits that are not meaningful enough. 2007-09-04 16:16 +0000 [r2992] Tzafrir Cohen * zaptel-base.c: Fixing the ZAPTEL_SYNC_TICK patch for zaptel-base.c (#9645) 2007-09-04 14:09 +0000 [r2991] Joshua Colp * zaptel.h: (closes issue #10087) Reported by: Matti Remove comment that is no longer true. -1 will not cause the name to be used. 2007-09-01 03:32 +0000 [r2990] Tzafrir Cohen * ppp/Makefile, README, ppp, /, configure, configure.ac, makeopts.in: * Maintain the same meaning of DESTDIR and INSTALL_PREFIX as in main Makefile * Document ppp support to the best of my knowledge. * Err clearly if the VERSION was not found. * Add some basic/broken detection of ppp in autoconf. Merged revisions 2987 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 2007-08-31 15:56 +0000 [r2988] Jason Parker * Makefile: CONFIG_FILE already has DESTDIR prepend to it. It is not needed here. Issue 10619, patch by djflux 2007-08-30 22:47 +0000 [r2986] Tilghman Lesher * zaptel.h, zaptel-base.c: Add two fields to the spanconfig struct (at the bottom, as suggested by tzafrir), with a define to let modules know that it's there 2007-08-30 21:53 +0000 [r2984-2985] Kevin P. Fleming * ppp/Makefile, ppp (added), ppp/zaptel.c, /: Merged revisions 2983 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2983 | kpfleming | 2007-08-30 16:48:55 -0500 (Thu, 30 Aug 2007) | 2 lines add a proper plugin for Zaptel support in pppd, so that it can be used with any distro-supplied version of pppd instead of requiring a patched copy from the Digium download site ........ * wct4xxp/base.c: don't know how this was missed when i upgraded the interrupt flags before... 2007-08-30 17:18 +0000 [r2977-2980] Russell Bryant * wctdm24xxp/base.c: remove an unnecessary memset of the global ifaces array on module init * wctdm.c: Remove some code that could never be executed. Instead of fixing the if statement, I just removed it. The contents of this global array are guaranteed to be zeroed out for us on load. 2007-08-28 18:48 +0000 [r2971-2972] Matthew Fredrickson * patlooptest.c: Revert the patlooptest changes * Makefile, patlooptest.c: Make sure the target name is not the same as the directory name. Thanks Josh :-) 2007-08-28 17:53 +0000 [r2967-2969] Russell Bryant * zonedata.c: fix index for ru tones. Thanks to Malcolm for pointing this out. * zonedata.c: Add Russian tones. (issue #7953, hanabana) 2007-08-27 21:42 +0000 [r2963] Jason Parker * Makefile, /: Merged revisions 2962 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2962 | qwell | 2007-08-27 16:38:48 -0500 (Mon, 27 Aug 2007) | 3 lines Make sure we build the static version of libtonezone (and as a side-effect, all of the programs) with -fPIC ........ 2007-08-27 07:15 +0000 [r2952-2961] Tzafrir Cohen * Makefile, /: Enact the init.d script when not installing to a DESTDIR. Merged revisions 2960 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 * xpp/Makefile: Reduce the noise when building xpp/ . * Makefile: * Skip cleaning modules if KSRC is not defined: it is optional if you build userspace alone ("make programs"). * Pass HOTPLUG_FIRMWARE explicitly to kernel 2.6 makefile. This is to help eventually remove .EXPORT_ALL_VARIABLES from Makefile. * Makefile: What is -O4 anyway? * Makefile: Allow 'make clean' to work without a valid KSRC (for those building just 'programs'). * zaptel.sysconfig: In theory there should be no editing of the init.d script needed. So document how we can configure it without editing. * zaptel.init: zaptel.init: Allow passing extra arguments (e.g.: -c conffig) to ztcfg. * zconfig.h: Enable the sync tick patch. * Makefile: Do install the hdlc network interface script. 2007-08-24 20:47 +0000 [r2950] Jason Parker * /, Makefile.kernel26: Merged revisions 2949 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 (closes issue #10555) ........ r2949 | qwell | 2007-08-24 15:46:20 -0500 (Fri, 24 Aug 2007) | 4 lines Fix an issue that caused only MG2 and possibly HPEC to work. Issue 10555, patch by me. ........ 2007-08-24 19:41 +0000 [r2946-2948] Matthew Fredrickson * wct4xxp/base.c: Let's not exclusive framer interrupts by default * zaptel-base.c: More backport code * wct4xxp/base.c, zaptel.h, wct4xxp/wct4xxp.h: Beginning backport of trunk to 1.4 2007-08-23 16:42 +0000 [r2941] Matthew Fredrickson * wctdm.c, wctdm24xxp/base.c, /: Merged revisions 2940 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2940 | mattf | 2007-08-23 11:41:36 -0500 (Thu, 23 Aug 2007) | 1 line Increase CWCID reliability on analog modules significantly. (although if you have problems with pulse dialing on high REN loads, see the comment to revert the value back to its previous value). Thanks Kinsey and Rick. ........ 2007-08-22 21:02 +0000 [r2934-2937] Jason Parker * /, zaptel-base.c: Merged revisions 2936 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2936 | qwell | 2007-08-22 16:01:14 -0500 (Wed, 22 Aug 2007) | 6 lines Don't try to create devices 250 and above in udev. Closes issue 10522, fix found by me (but I'm not going to take credit for the code, since it already existed in trunk for some reason) ........ * Makefile: Reverse logic which checks for existing zaptel.conf Issue 10527, reported by arcivanov. 2007-08-21 Matthew Fredrickson * Zaptel 1.4.5.1 released. 2007-08-21 18:42 +0000 [r2922-2924] Matthew Fredrickson * wctdm24xxp/GpakCust.h, wctdm24xxp/wctdm24xxp.h, wctdm24xxp/base.c, /, wctdm24xxp/GpakCust.c: Merged revisions 2923 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2923 | mattf | 2007-08-21 13:40:23 -0500 (Tue, 21 Aug 2007) | 1 line Allow wctdm24xxp to compile on a 2.4 based kernel ........ * Makefile: Add some 2.4 Makefile trickery for wctdm24xxp 2007-08-21 16:49 +0000 [r2920] Tzafrir Cohen * xpp/xbus-core.c, /: Fix building on kernel 2.6.23rc1, from Axel Thimm (xpp r4523). Merged revisions 2919 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 2007-08-21 15:02 +0000 [r2917] Russell Bryant * firmware/Makefile: change ftp to downloads 2007-08-21 08:21 +0000 [r2911-2915] Tzafrir Cohen * fxotune.c, /: * Add an explicit mode to the callto open (the default one that is used anyway). * Clarify error message. closes #10505 on Zaptel 1.4. Merged revisions 2914 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 * /, zaptel.init: * Set maximal zaptel udev timeout to 20 seconds. * Allow overriding it from cwrcconfconfig file (and explain how). (From trunk r2909 - got accidentally commited there first). Merged revisions 2910 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 2007-08-19 12:12 +0000 [r2905-2907] Tzafrir Cohen * /, xpp/README.Astribank: Fix README.Astribank with asciidoc 8.2.2: make "underlining" more strict. (xpp r4519) Merged revisions 2906 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 * Makefile, /: * Fix Makefile typo in 'install-progrms:' (Thanks, Mark Purcell). * Rename the generated xpp/README.html to xpp/README.Astribank.html to provide a unique basename among docs (helps debian packaging). 2007-08-17 Matthew Fredrickson * Zaptel 1.4.5 released. 2007-08-17 18:13 +0000 [r2866-2881] Tzafrir Cohen * /, build_tools/install_prereq: install_prereq: Don't install packages twice. Merged revisions 2880 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 * /: An 1.2-specific fix. * Makefile, README, /: * programs and install-programs are now for all of userspace. Added the target 'utils' for what 'programs' used to be. * tonezone.h is installed with install-libs, not install-include . * Document this. * Document some other variations on 'make' and 'make install'. * Improve documentation of /proc/zaptel . * Ignoring some more utilities. * /: No need to merge those changes - the implementation in 1.4 is different. * Makefile, makeopts.in: Get LDFLAGS and CFLAGS from autoconf. Make sure that they get everywhere. * Makefile: Build menuselect with the HOSTCC. * xpp/xpp_zap.c, xpp/.version, xpp/utils/zconf/Zaptel/Config/Defaults.pm, xpp/card_fxo.c, xpp/xbus-sysfs.c, xpp/xpp_zap.h, xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/xproto.c, xpp/xpd.h, xpp/card_bri.c, xpp/zap_debug.h, xpp/ChangeLog, xpp/xbus-core.c, /, zaptel.sysconfig, xpp/utils/genzaptelconf, xpp/xpp_usb.c: xpp rev. 4515: * BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces a BRI_NT to retry a connection indefinitely (this is our default). When false it revert to the behaviour in changeset:4415 ("Bezeq like") * Improvement in DBG macros. The print_dbg parameter is now set of flags to debug. They are defined in zap_debug.h * Don't use Astribanks connected to USB1 interfaces Unless the user set the option usb1=1 for xpp_usb (r4504). * And some more documentation... * Include some of our variables in the default zaptel sample file. Merged revisions 2860 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 2007-08-16 20:48 +0000 [r2858-2865] Matthew Fredrickson * wcte12xp.c, /: Merged revisions 2864 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2864 | mattf | 2007-08-16 15:47:46 -0500 (Thu, 16 Aug 2007) | 1 line Make sure we enable MRM ........ * /, wctdm24xxp/GpakApi.c: Merged revisions 2861 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2861 | mattf | 2007-08-16 15:10:03 -0500 (Thu, 16 Aug 2007) | 1 line Remove some unused variables from compilation ........ * wcte12xp.c, wctdm24xxp/base.c, /: Merged revisions 2857 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2857 | mattf | 2007-08-16 15:02:58 -0500 (Thu, 16 Aug 2007) | 1 line Fix for when voicebus based cards stop taking interrupts on some systems ........ 2007-08-16 18:39 +0000 [r2855] Tzafrir Cohen * Makefile, /, xpp: * Add a rule for generating xpp/README.html (not used by default). * Ignore it, and clean it and README.html . Merged revisions 2850 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 2007-08-16 17:05 +0000 [r2853] Matthew Fredrickson * wctdm24xxp/base.c, /: Merged revisions 2852 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2852 | mattf | 2007-08-16 12:01:18 -0500 (Thu, 16 Aug 2007) | 1 line Make sure the gain adjustment is only done if the VPM100M is present ........ 2007-08-16 13:32 +0000 [r2849] Tzafrir Cohen * Makefile: Break install target, as in 1.2: * Provide separate programs and libs targets , and provide separate install-programs, install-libs , install-includes and install-modules. * DESTDIR should work. INSTALL_PREFIX was removed, as it was ambigious. Use the vaiable 'prefix' to override /usr . * Print a message at the end of the install target. * Convert shell logic in targets to make logic. * Still not sure install-libs and install-includes are really needed. * Use includedir, mandir and libdir (but not sbindir) from configure. * Install Man pages and utils according to those selected by the user. 2007-08-15 22:12 +0000 [r2842-2847] Matthew Fredrickson * ztdynamic.c: Fix for 8277. Inproper alarm handling on dynamic spans * Makefile: Make sure that the URL is REALLY up to date * Makefile: Make sure we use the new ftp.digium.com 2007-08-15 14:26 +0000 [r2833-2839] Tzafrir Cohen * Makefile, README, /, Makefile.kernel26, zconfig.h: * Allow setting the echo canceller from the Makefile or the environment (needed for overriding the default EC in Debian m-a builds) * Allow specifiying extra modules in the make command line: MODULES_EXTRA and SUBDIRS_EXTRA Merged revisions 2838 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 * /, Makefile.kernel26: Fix building on older CentOS 4 and Trixbox. Merged revisions 2836 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 * xpp/.version, xpp/ChangeLog, /, xpp/README.Astribank, xpp/card_fxs.c, xpp/xproto.c: Merging a few small changes Xorcom: * Marked with no. 4416, to note that major changes after 4415 were note merged yet. * Demote the messages about PCM in non-PCM from notice to debug (r4501). * Fix sample BRI zapata.conf: NT instead of TE (r4498). * Disable FXS hardware DTMF detection by default (r4492). Merged revisions 2832 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 2007-08-10 21:58 +0000 [r2830] Matthew Fredrickson * wctdm24xxp/base.c, /: Merged revisions 2829 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2829 | mattf | 2007-08-10 16:54:56 -0500 (Fri, 10 Aug 2007) | 1 line Make sure we permit MRM commands ........ 2007-08-06 20:31 +0000 [r2821-2824] Jason Parker * Makefile: Use host compiler to build gendigits Issue 10255, initial patch by mirabilos, modified by me to work with 1.4. * zaptel.h: Include some headers from the target system rather than the build system. Issue 10254, patch by mirabilos 2007-08-05 12:31 +0000 [r2819] Tzafrir Cohen * /, xpp/utils/zconf/Zaptel/Hardware/PCI.pm: Extra Zaptel PCI IDs (from Philipp Kempgen). From Xorcom r4466. Merged revisions 2818 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 2007-08-01 22:41 +0000 [r2812] Tzafrir Cohen * xpp/xpp_zap.c, xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h, xpp/xbus-sysfs.c (added), xpp/card_fxs.c, xpp/xproto.c, xpp/utils/Makefile, xpp/Makefile, xpp/firmwares/FPGA_FXS.hex, xpp/card_global.h, xpp/xpd.h, xpp/xproto.h, xpp/zap_debug.h, xpp/card_bri.c, xpp/ChangeLog, xpp/xbus-core.c, /, xpp/utils/xpp_fxloader, xpp/xbus-core.h, xpp/utils/astribank_hook (added), xpp/utils/xpp.rules, xpp/xpp_usb.c: xpp.r4415: * Show Astribank 6+2 as 6/2 channels and not 8/8 channels. - Added as a "subtype" to the device type (r4391). * Fixed a panic in BRI span shutdown method (r4393). * Changes to debug macros. * Add proper sysfs support (r4406) - A bus on whuch all of the Astribanks reside. - Replaces useless sysfs code that existed in the module. - Currently used to set the sync source automatically at device adition / removal. * BRI: We do need the T1 timer in NT. If it gets into G2 state (rr4407). Merged revisions 2811 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 2007-08-01 20:21 +0000 [r2809] Jason Parker * /, zaptel-base.c: Merged revisions 2808 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2808 | qwell | 2007-08-01 15:21:04 -0500 (Wed, 01 Aug 2007) | 2 lines Per Matt Fredrickson, we don't want to use GFP_KERNEL while holding a spinlock. ........ 2007-08-01 00:15 +0000 [r2806-2807] Jim Dixon * pciradio.c: Merged back in some changes I wasnt aware of * pciradio.c: Much newer and improved version of pciradio driver 2007-07-30 17:23 +0000 [r2802] Jason Parker * /, hpec/hpec_zaptel.h: Merged revisions 2251 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2251 | kpfleming | 2007-02-28 14:44:28 -0600 (Wed, 28 Feb 2007) | 2 lines allow the HPEC to work even if echotraining has been requested (the HPEC doesn't do echotraining, but it shouldn't fail just because the user asked for it) ........ 2007-07-29 00:39 +0000 [r2797] Tzafrir Cohen * /, wctdm24xxp, xpp/utils: * Ignore generated files on the new wctdm24xxp dir. (from 1.2 r2796) * Ignore two extra man pages on xpp/utils . 2007-07-27 21:56 +0000 [r2790] Jason Parker * /: Blocked revisions 2789 via svnmerge ........ r2789 | qwell | 2007-07-27 16:55:56 -0500 (Fri, 27 Jul 2007) | 3 lines Rearrange and add some Makefile targets to be in line with the original intentions of the addition of targets such as install-programs. ........ 2007-07-27 19:36 +0000 [r2782-2787] Matthew Fredrickson * fxotune.c: Quick fix for the could not fill input buffer problem * wctdm24xxp/base.c, /: Merged revisions 2781 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2781 | mattf | 2007-07-27 14:02:28 -0500 (Fri, 27 Jul 2007) | 1 line Minor message removal ........ 2007-07-24 18:02 +0000 [r2776] Joshua Colp * firmware/Makefile, wctdm24xxp/VPMADT032.bin (removed), wctdm24xxp/Makefile, wctdm24xxp/Makefile.kernel26: Add support for building the firmware for the wctdm24xxp driver as an object using the new firmware system. 2007-07-22 17:46 +0000 [r2772] Tzafrir Cohen * Makefile: Revert initd config file installation to the greeddy one of before zaptel 1.2.19/1.4.4 - install on both /etc/default/zaptel and /etc/sysconfig/zaptel . Closes 0010257 . (From branches/1.2 r2771) 2007-07-20 22:57 +0000 [r2762-2769] Matthew Fredrickson * firmware/Makefile, wctdm24xxp/base.c, firmware/firmware.xml: Make sure we use the new firmware interface * wctdm24xxp/base.c, /: Merged revisions 2765 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2765 | mattf | 2007-07-20 14:17:25 -0500 (Fri, 20 Jul 2007) | 1 line Add new 2.6.22 api updates ........ * Makefile, wctdm24xxp/base.c, wctdm24xxp/GpakApi.c, wctdm24xxp/gpakenum.h, wctdm24xxp (added), wctdm24xxp/GpakApi.h, wctdm24xxp/GpakCust.c, wctdm24xxp/Makefile.kernel26, wctdm24xxp/gpakErrs.h, zaptel-base.c, wctdm24xxp/GpakCust.h, wctdm24xxp/GpakHpi.h, wctdm24xxp/wctdm24xxp.h, /, wctdm24xxp/Makefile, wctdm24xxp.c (removed): Merged revisions 2761 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2761 | mattf | 2007-07-20 11:19:47 -0500 (Fri, 20 Jul 2007) | 1 line New product support, new echo canceler and new boards ........ 2007-07-19 09:16 +0000 [r2759] Tzafrir Cohen * xpp/utils/Makefile: * Generate list of Zaptel Modules directories automatically. * Evaluate PERLLIBDIR only once. Closes: #10223 (Xorcom changeset:4379, from 1.2 r2758) 2007-07-19 02:07 +0000 [r2753-2757] Kevin P. Fleming * ztdummy.c, pciradio.c, wct4xxp/base.c, wcte11xp.c, wcte12xp.c, wct1xxp.c, wctc4xxp/base.c, wctdm.c, /, torisa.c, wctdm24xxp.c, zaptel.h, tor2.c, wcfxo.c: Merged revisions 2756 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2756 | kpfleming | 2007-07-18 21:05:03 -0500 (Wed, 18 Jul 2007) | 2 lines update to 2.6.22 request_irq() flags ........ * wcte12xp.c, wctc4xxp/base.c, /, wctdm24xxp.c: Merged revisions 2754 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2754 | kpfleming | 2007-07-18 20:21:25 -0500 (Wed, 18 Jul 2007) | 2 lines convert a few drivers over to current PCI module registration function ........ * /, zaptel-base.c: Merged revisions 2752 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2752 | kpfleming | 2007-07-18 20:02:53 -0500 (Wed, 18 Jul 2007) | 2 lines don't try to timeslot-interchange channels that are being bridged (DACS) if either channel has a txgain or rxgain specified, since that gain won't be applied any longer if the DACS is put into effect ........ 2007-07-18 16:27 +0000 [r2751] Joshua Colp * /: Blocked revisions 2750 via svnmerge ........ r2750 | file | 2007-07-18 13:27:04 -0300 (Wed, 18 Jul 2007) | 2 lines A distribution may have multiple directories for firmware and without knowing the proper one we have to copy the firmware into each. We can't just copy it into the first one found. ........ 2007-07-16 Russell Bryant * Zaptel 1.4.4 released. 2007-07-16 13:14 +0000 [r2740] Tzafrir Cohen * zaptel.init: Simplify hpec_start and remove duplicates. 2007-07-13 08:22 +0000 [r2733-2736] Tzafrir Cohen * xpp/xpp_zap.c, xpp/utils/zconf/Zaptel/Config/Defaults.pm, xpp/firmwares/FPGA_1151.hex, xpp/README.metering (added), xpp/xpp_zap.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/firmwares/USB_1130.hex, xpp/xpd.h, xpp/firmwares/USB_1150.hex, xpp/xproto.h, xpp/utils/zconf/Zaptel/Config (added), xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/xpp_blink, xpp/card_bri.c, xpp/ChangeLog, xpp/xbus-core.c, xpp/utils/fpga_load.c, xpp/xbus-core.h, xpp/utils/lszaptel, xpp/xdefs.h, xpp/utils/xpp.rules, xpp/utils/zapconf, xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/utils/xpp_sync, xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c, xpp/card_global.c, xpp/README.Astribank, xpp/card_fxs.c, xpp/utils/zaptel_hardware, xpp/Makefile, xpp/utils/Makefile, xpp/card_global.h, xpp/firmwares/USB_1140.hex, xpp/init_card_3_26, xpp/utils/zconf/Zaptel/Hardware.pm, xpp/utils/zt_registration, xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf, xpp/xpp_usb.c: Merge xpp r4372: * Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward) * Fix a critical race with zaptel synchronization (r4362) * Added a /proc/xpp/cmds for statistics about command timing (r4360) * Fix a digit mapping bug with hardware dtmf detection (r4357) * In xpp/utils/Makefile add perl syntax checks to our scripts (r4337) * Better USB data error checking (r4336) * udev rules (xpp.rules) avoid false calls from wrong nodes (r4331) * Improve hardware detection and reporting in lszaptel, zaptel_hardware. zapconf is basically functional. * Leds are blinked synchronously on all Astribanks now (r4262) * Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258) (This feature was not yet accepted into official zaptel) * Removed compile warning about HZ != 1000 (r4218) * Firmware updates. * fpga_load now supports USB pathes without zeros (r4211) * XPD numbers have changed to '' (r4196) * Proper support for ZT_VMWI ioctl, if used in zaptel (r4092) * Fix FXO power denial detection (r4054) * FXO could accidentally go off-hook with some compilers (r4048) (From branches/1.2 r2732, r2735) * Makefile: * config target: Replace shell scriptary with makefile logic. * config target: Add a helpful text for the Zaptel installer. (From branches/1.2 r2729) * README, build_tools/install_prereq (added): Add a script to install build requirements. This was after the instructions on which kernel to install on CentOS became a manual script with if-s and case-s. Should work on Debian and CentOS. (From branches/1.2 r2728, r2730) 2007-07-11 19:04 +0000 [r2726] Tzafrir Cohen * build_tools/genmodconf: * Use shell, rather than shell-in-makefile syntax. * Supress ugly text when /lib/modules/`uname -r` doesn't exist (but we build for a different kernel) (From branches/1.2 r2724) 2007-07-11 18:14 +0000 [r2718-2722] Jason Parker * README, /: Merged revisions 2721 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2721 | qwell | 2007-07-11 13:14:11 -0500 (Wed, 11 Jul 2007) | 4 lines tzafrir pointed out that this was put in the wrong place. Move it so that asciidoc can properly parse it. ........ * README, /: Merged revisions 2717 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2717 | qwell | 2007-07-11 12:24:21 -0500 (Wed, 11 Jul 2007) | 7 lines On some systems, sudo does not automatically add the PATH for root, so things like /sbin may not be in there, which means chkconfig may not be found. Add a note stating this. Issue 10181. ........ 2007-07-11 13:08 +0000 [r2711-2714] Tzafrir Cohen * README: Fix the zaptel-perl install insturctions. * README.Linux26 (removed): Remove obsolete and inaccurate README.Linux26 . * README, /, zaptel.init, xpp/utils/Makefile: * Enable zaptel-perl and use perl utilities for Astribank init (from 1.2 r2710) * Update README accordingly. * Continue documenting Zaptel, while we're updating the README. * Ignore the generated README.html. 2007-07-08 19:22 +0000 [r2706-2707] Tzafrir Cohen * README: Moving specific commands to a distro-specific part. * Makefile, README: * README fixes. * Add makefile target to generate README.html from README with asciidoc. Note: At least for now the ability to generate a nice extra HTML copy of the text README is an extra feature. But the README file is meant to be primarily read as a text file and will still be readable as such till further notice. 2007-07-06 23:24 +0000 [r2703] Tzafrir Cohen * README: Two more sections to the README. Though I'm not quite happy with their style. 2007-07-05 18:10 +0000 [r2697] Jason Parker * /, zaptel-base.c: Merged revisions 2696 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2696 | qwell | 2007-07-05 13:08:53 -0500 (Thu, 05 Jul 2007) | 5 lines Do not report channels in ZT_STATE_KEWL or ZT_STATE_AFTERKEWL (ie; battery drop) states as available. This becomes more likely if ZT_KEWLTIME or ZT_AFTERKEWLTIME are set to higher values. Issue 7612, patch by rbraun. ........ 2007-07-04 19:06 +0000 [r2688-2690] Tzafrir Cohen * zaptel.init: Bourne shell scripts should not use >& . dash doesn't support it. And all of them simply supressed errors, so they were replaced with 2> /dev/null . (from branches/1.2 r2689) * zaptel.init: Set default value for XPP_SYNC. 2007-07-03 18:58 +0000 [r2684] Jason Parker * wctdm.c, /: Merged revisions 2683 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2683 | qwell | 2007-07-03 13:57:42 -0500 (Tue, 03 Jul 2007) | 4 lines Fix a potential issue with the reversepolarity module option in wctdm. Issue 7191, patch by Thomas Andrews. ........ 2007-07-03 16:46 +0000 [r2681] Matthew Fredrickson * wct4xxp/base.c, /: Merged revisions 2680 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2680 | mattf | 2007-07-03 11:39:34 -0500 (Tue, 03 Jul 2007) | 1 line Fix for span shutdown issue ........ 2007-07-02 15:58 +0000 [r2676] Joshua Colp * /, ztd-eth.c: Merged revisions 2675 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2675 | file | 2007-07-02 12:56:18 -0300 (Mon, 02 Jul 2007) | 2 lines Add support for the 2.6.22 kernel. (issue #10095 reported by Matti) ........ 2007-07-02 15:07 +0000 [r2674] Tzafrir Cohen * zaptel.init: * Fix unloading of xpp modules. * Add optional support for using the zaptel perl functions. (From branches/1.2 changesset:2670 and changeset:2673) 2007-07-02 13:46 +0000 [r2671] Joshua Colp * firmware/Makefile, wctc4xxp/tc400m-firmware.bin (removed), wctc4xxp/base.c, wctc4xxp/Makefile.kernel26: Nobody ever updated the wctc4xxp stuff to use the in-tree firmware management stuff... 'tsk 'tsk. (issue #10093 reported by snuffy) 2007-06-26 19:37 +0000 [r2669] Kevin P. Fleming * /: block fix that is not needed here (already present) 2007-06-23 15:55 +0000 [r2664] Tzafrir Cohen * README: * Correct names for Digium cards. * Further removed obsolete sections. * Section about the perl stuff added. 2007-06-21 13:37 +0000 [r2657-2662] Tzafrir Cohen * README: A README that will actually help users a bit. * zaptel.init: * Remove ztcfg -s from shutdown. * Someone with a dynamic span, please test the suggested replacement (remmed-out). * Reduced nesting in wait_for_xpp . * zaptel.init: Reduce nesting in hpec startup by moving it to a function. * zaptel.init: Fix a syntax error in hpec startup. * xpp/utils: Ignore some generated man pages. 2007-06-12 14:50 +0000 [r2643-2645] John Sloan * wctc4xxp/base.c, /: Merged revisions 2644 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2644 | jsloan | 2007-06-12 09:07:18 -0500 (Tue, 12 Jun 2007) | 1 line Corrected test code ........ * wctc4xxp/base.c, /: Merged revisions 2642 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2642 | jsloan | 2007-06-12 08:34:42 -0500 (Tue, 12 Jun 2007) | 1 line Added new PCI device ID ........ 2007-06-11 22:18 +0000 [r2639] Matthew Fredrickson * wct4xxp/base.c, /: Merged revisions 2638 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2638 | mattf | 2007-06-11 17:17:14 -0500 (Mon, 11 Jun 2007) | 1 line Add a couple of PCI ids ........ 2007-06-11 22:12 +0000 [r2635] Jason Parker * genconst.c (removed): Remove a file from the tree that hasn't been used in a very long time. The last time this file changed was in revision 79. It is also not referenced anywhere in the tree, and doesn't even compile... Issue 9923, reported by tzafrir. 2007-06-11 22:12 +0000 [r2634] Matthew Fredrickson * wct4xxp/base.c, /: Merged revisions 2633 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2633 | mattf | 2007-06-11 17:10:59 -0500 (Mon, 11 Jun 2007) | 1 line Make the version check optional ........ 2007-06-11 15:55 +0000 [r2622] John Sloan * wctc4xxp/base.c, /: Merged revisions 2621 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2621 | jsloan | 2007-06-11 10:47:37 -0500 (Mon, 11 Jun 2007) | 1 line Fixed SMP bugs on quad processor machines. Reduced memory usage ........ 2007-06-09 23:55 +0000 [r2611-2612] Tzafrir Cohen * doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: รณ is non-printable on non-UTF-8 locales. Replaced with \['o] to make lintian happy. * doc/fxstest.8 (added), doc/fxotune.8: * fxotune man page is up-to-date for 1.4. * fxtest man page. 2007-06-08 Russell Bryant * Zaptel 1.4.3 released. 2007-06-08 15:58 +0000 [r2601] Russell Bryant * wct4xxp/base.c, /: Merged revisions 2599 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2599 | russell | 2007-06-08 10:57:18 -0500 (Fri, 08 Jun 2007) | 1 line Make sure the name is right ........ 2007-06-08 15:37 +0000 [r2591-2597] Tzafrir Cohen * Makefile: Make the checkstack target basically work for kernel 2.6. * xpp/card_fxo.c, xpp/utils/xpp_fxloader: Some XPP bugfixes: * Fix FXO power denial detection (changeset:4054) * Incorrect data type could cause FXO module to go off-hook (changeset:4048) * xpp_fxloader: fix the error message when you want to disable * automatic firmware loading... (changeset:4060) Merged from branches/1.2 r2589 2007-06-07 17:02 +0000 [r2584] Russell Bryant * /: Blocked revisions 2583 via svnmerge ........ r2583 | russell | 2007-06-07 12:01:04 -0500 (Thu, 07 Jun 2007) | 4 lines The -quit option to find is not supported on the version of find installed on Centos 4. Lame! Just remove it, as it isn't really necessary. (issue #9800, noahisaac) ........ 2007-06-06 13:47 +0000 [r2574] Matthew Fredrickson * wct4xxp/base.c: Add 220/420 support 2007-06-01 17:06 +0000 [r2551] Matthew Fredrickson * wct4xxp/vpm450m.c, /: Merged revisions 2550 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2550 | mattf | 2007-06-01 11:56:09 -0500 (Fri, 01 Jun 2007) | 2 lines Fix for stack overflow on FC6 and VPM450M. ........ 2007-05-18 15:50 +0000 [r2540] Matthew Fredrickson * /, zaptel-base.c: Merged revisions 2539 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2539 | mattf | 2007-05-18 10:48:55 -0500 (Fri, 18 May 2007) | 2 lines Remove silly got signal message ........ 2007-05-17 21:47 +0000 [r2536] Tzafrir Cohen * xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex, xpp/utils/zconf/Zaptel/Hardware (added), xpp/firmwares/FPGA_FXS.hex, xpp/xpd.h, xpp/utils/zconf/Zaptel/Chans.pm, xpp/card_bri.c, xpp/ChangeLog, xpp/xbus-core.c, xpp/init_card_6_26, xpp/utils/zconf/Zaptel.pm, xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/utils/lszaptel, xpp/utils/xpp.rules, xpp/utils/zapconf (added), xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/utils/xpp_sync, xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/README.Astribank, xpp/card_global.c, xpp/utils/zaptel_hardware (added), xpp/Makefile, xpp/utils/Makefile, xpp/parport_debug.c (added), xpp/utils/zconf/Zaptel/Hardware/USB.pm, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/parport_debug.h (added), xpp/utils/zconf/Zaptel/Hardware.pm (added), xpp/utils/zt_registration, xpp/init_card_7_26, xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf, xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: XPP revision 3965: * Tested with zaptel-1.2.17.1 * Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info * Adjust output of xpp_sync script. Pad for 8 port BRI. * Added a debugging module parport_debug (not compiled by default). * Added an optional patch to zaptel: - compiles only if ZAPTEL_SYNC_TICK is defined - Allow interested driver to register for "sync" notification. - Does not affect drivers that do not use this feature. * Added external synchronization feature: - Only if ZAPTEL_SYNC_TICK feature is compiled in - Than XPP may be synchronized by another card (e.g: an Astribank with FXS can be synchronized by a Digium PRI card). - May be enabled/disabled in runtime via the 'sync_tick_active' module parameter to the xpp.ko module. * Fixed a potential bug in D-Channel hexdump printing. * New visual indications in BRI leds: - Constant ON RED/GREEN: Shows the port type -- NT/TE. - Very fast "double blink": Layer1 work, no D-Channel yet. - Steady blinking (1/2 sec): D-Channel trafic detected. * xpp_fxloader moved to /usr/share/zaptel . * adj_clock removed: never really used. * Now we have Zaptel::Hardware and a sample zaptel_hardware script (not (installed by default). * We also have a sample perl zapconf (not installed by default) which aims at replacing genzaptelconf (sans the modules detection). 2007-05-17 20:35 +0000 [r2532] Matthew Fredrickson * wct4xxp/vpm450m.c: Reduce stack usage of VPM450M. Fix for FC6 module load problems 2007-05-17 18:46 +0000 [r2527] Jason Parker * Makefile: Fix problem with chan_misdn not being built in Asterisk, due to missing suppserv. Update to new tarballs from misdn.org and allow versioning in Makefile. Issue 9064. 2007-05-17 16:49 +0000 [r2524] Joshua Colp * fxotune.c: Allow the fxotune config file to be specified instead of hardcoded. (issue #8444 reported by pupeno, patch by tzafrir) 2007-05-17 14:27 +0000 [r2522] Tzafrir Cohen * xpp/Makefile: The debugfs code seems to have some bad sideeffects when badly used. So don't enable it by default. (From chabgeset 2520) 2007-05-04 22:37 +0000 [r2495] Tzafrir Cohen * zaptel.init: zaptel.init: use automative modules unloading (as in trunk and 1.2). 2007-05-01 16:22 +0000 [r2483] Russell Bryant * /, zonedata.c: Merged revisions 2482 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2482 | russell | 2007-05-01 11:20:50 -0500 (Tue, 01 May 2007) | 3 lines Add zonedata information for the Philippines. (issue #9525, reported and patched by loloski) ........ 2007-04-30 23:07 +0000 [r2480] Kevin P. Fleming * zaptel.init: eliminate bogus warning message during script startup with no HPEC licenses 2007-04-29 22:12 +0000 [r2477] Tzafrir Cohen * xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h, xpp/utils/hexfile.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/firmwares/USB_1130.hex, xpp/xproto.h, xpp/firmwares/USB_1150.hex, xpp/xpd.h, xpp/calibrate_slics, xpp/init_card_4_24 (removed), xpp/utils/zconf/Zaptel/Chans.pm, xpp/init_card_6_24 (removed), xpp/utils/xpp_blink (added), xpp/init_card_4_26 (added), xpp/card_bri.c, xpp/ChangeLog (added), xpp/xbus-core.c, xpp/init_card_6_26 (added), xpp/utils/zconf/Zaptel.pm, xpp/utils/adj_clock.c (removed), xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/utils/xpp_fxloader, xpp/utils/fpga_load.c, xpp/utils/lszaptel, xpp/utils/xpp_sync, xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/README.Astribank, xpp/card_fxs.c, xpp/card_global.c, xpp/utils/Makefile, xpp/utils/adj_clock.8 (removed), xpp/card_global.h, xpp/firmwares/USB_1140.hex, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/utils/fpga_load.8, xpp/init_card_3_24 (removed), xpp/init_card_3_26 (added), xpp/utils/zt_registration, xpp/init_card_7_24 (removed), xpp/init_card_7_26 (added), xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf, xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: xpp rev. 3814: * Protocol no. 2.6: syncing improvements. * Support for 8-port Astribank BRI. * Firmware unloading now works: rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset * Defaults of kernel parameters are now part of parameter description. * World-readable kernel parameters. * No need for extra patch beyond bristuff for Astribank BRI. * Default poll intervals changed: 500 in BRI and FXO. * Allow changing FXS polls interval at run time. * BRI initalization fixed on SUSE (path to logger). * When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in /etc/sysconfig/zaptel . * zt_registration not verbose by default. * xpp_sync warns if FXO is sync slave. * Fixed genzaptelconf -z (zapscan output emulation). * PCM fixes. * Solves "multiple ticks" bug. No need for pcm_tasklets workaround. 2007-04-28 21:29 +0000 [r2465-2470] Matthew Fredrickson * wct4xxp/base.c, /: Merged revisions 2469 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2469 | mattf | 2007-04-28 16:07:35 -0500 (Sat, 28 Apr 2007) | 1 line Fix for potential deadlock in wct4xxp driver ........ * wcte11xp.c, /: Merged revisions 2464 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2464 | mattf | 2007-04-28 14:04:50 -0500 (Sat, 28 Apr 2007) | 2 lines Fix for potential deadlock in drivers ........ 2007-04-27 19:06 +0000 [r2460] Jason Parker * /, ztmonitor.c: Merged revisions 2459 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2459 | qwell | 2007-04-27 14:05:25 -0500 (Fri, 27 Apr 2007) | 2 lines Correct and remove (one of each) broken syntax examples. ........ 2007-04-25 16:32 +0000 [r2452] Matthew Fredrickson * wct1xxp.c, /: Merged revisions 2451 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2451 | mattf | 2007-04-25 11:26:18 -0500 (Wed, 25 Apr 2007) | 1 line Start fixing potential deadlock between device driver and zaptel ........ 2007-04-25 Russell Bryant * Zaptel 1.4.2.1 released. 2007-04-25 15:36 +0000 [r2444] Jason Parker * /, zaptel-base.c: Merged revisions 2443 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2443 | qwell | 2007-04-25 10:35:34 -0500 (Wed, 25 Apr 2007) | 2 lines Don't try to reference a variable on a channel that may not exist. ........ 2007-04-24 Russell Bryant * Zaptel 1.4.2 released. 2007-04-24 18:34 +0000 [r2433-2435] Jason Parker * /: Blocked revisions 2434 via svnmerge ........ r2434 | qwell | 2007-04-24 13:33:29 -0500 (Tue, 24 Apr 2007) | 1 line Backport pre-echocan debugging for ztmonitor ........ * zaptel.h, zconfig.h, ztmonitor.c, jpah.h (added), zaptel-base.c: Merge in pre-echocan debugging for ztmonitor. 2007-04-13 23:14 +0000 [r2423] Jason Parker * /, zaptel-base.c: Merged revisions 2422 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2422 | qwell | 2007-04-13 18:12:23 -0500 (Fri, 13 Apr 2007) | 14 lines Fix several places where we treat confmode as a bitmask. It is a bitmask...sort of.. I'll explain.. confmode is used for 2 different things. It defines both the "mode" and the "flags" of the conference. The "mode" part is in 0x00FF and is NOT bitwise. The "flag" part is in 0xFF00 and *IS* bitwise. Confused yet? Good. So, when we want to check the "mode" of the conference, we need to check only within 0xFF. There were several places where this was not happening - but due to luck, it worked (...sort of). That's what this patch fixes. ........ 2007-04-11 19:03 +0000 [r2406] Matt Frederickson * /, zaptel-base.c: Merged revisions 2405 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2405 | mattf | 2007-04-11 14:01:21 -0500 (Wed, 11 Apr 2007) | 4 lines Fix buglet in memory corruption fix. ........ 2007-04-07 16:47 +0000 [r2397] Matt Frederickson * zaptel-base.c: Fix for #9208. Memory corruption within zaptel data. 2007-03-30 21:03 +0000 [r2359] Matt Frederickson * zaptel-base.c: Fix potential spinlock recursion issue. 2007-03-30 18:57 +0000 [r2354] Jason Parker * /, zaptel-base.c: Merged revisions 2353 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2353 | qwell | 2007-03-30 13:56:46 -0500 (Fri, 30 Mar 2007) | 4 lines Fix an issue where an echo can was freed incorrectly in certain circumstances. Issue 9292, fix suggested by ddv2005. ........ 2007-03-29 16:36 +0000 [r2348-2351] Russell Bryant * README.hpec, /, zaptel.init: Merged revisions 2350 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2350 | russell | 2007-03-29 11:35:37 -0500 (Thu, 29 Mar 2007) | 4 lines Trim the HPEC readme that is included in zaptel to only include basic information as the one on the FTP site will always be the one that contains the full up to date information. Also, tweak some grammar in the additions to the init script. ........ * README.hpec (added), /, zaptel.init: Merged revisions 2347 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2347 | russell | 2007-03-29 11:05:32 -0500 (Thu, 29 Mar 2007) | 3 lines Add a README for HPEC, and add support for HPEC in the init script. (issue #9413, chozian) ........ 2007-03-27 18:49 +0000 [r2343] Russell Bryant * /, zaptel.init: Merged revisions 2342 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2342 | russell | 2007-03-27 13:48:23 -0500 (Tue, 27 Mar 2007) | 5 lines When debug is enabled, ensure that "debug=1" gets passed to the zaptel module, and not just the hardware modules. Also, run "ztcfg -s" at the beginning of the "stop" action of the script. (issue #7409, PCadach and tzafrir) ........ 2007-03-23 02:11 +0000 [r2336] Kevin P. Fleming * Makefile: fix builds for 2.4 kernels 2007-03-22 Kevin P. Fleming * Zaptel 1.4.1 released. 2007-03-23 02:11 +0000 [r2333-2336] Kevin P. Fleming * Makefile: fix builds for 2.4 kernels * mec.h, kb1ec.h, mec2.h, mec3.h, sec-2.h, sec.h, hpec/hpec_zaptel.h, mg2ec.h, zaptel.h, zaptel-base.c: bring in the rest of the support needed for HPEC 2007-03-19 16:30 +0000 [r2323] Joshua Colp * /, README.Linux26: Merged revisions 2322 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2322 | file | 2007-03-19 12:28:58 -0400 (Mon, 19 Mar 2007) | 2 lines Update documentation to match current Makefile. linux26 is no longer a valid target. (issue #9296 reported by valley) ........ 2007-03-14 16:08 +0000 [r2308] Matt Frederickson * wct4xxp/base.c, /: Merged revisions 2307 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2307 | mattf | 2007-03-14 10:03:18 -0600 (Wed, 14 Mar 2007) | 2 lines Fix bug in J1 mode configuration. ........ 2007-03-09 20:04 +0000 [r2302] Matt Frederickson * wct4xxp/vpm450m.c, /: Merged revisions 2301 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2301 | mattf | 2007-03-09 13:59:43 -0600 (Fri, 09 Mar 2007) | 2 lines Make sure we don't allocate as GFP_KERNEL in atomic context ........ 2007-03-08 15:58 +0000 [r2297] Joshua Colp * /, hpec/hpec_zaptel.h: Merged revisions 2296 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2296 | file | 2007-03-08 10:56:05 -0500 (Thu, 08 Mar 2007) | 2 lines vprintk is only available on 2.6.9+ (issue #9232 reported by baconbuttie) ........ 2007-03-08 00:48 +0000 [r2294] Russell Bryant * zaptel.h: Add a constant for ZT_EVENT_REMOVED to allow a driver to hint to userspace that a channel has been removed. (issue #7256, tzafrir) 2007-03-07 19:36 +0000 [r2292] Tzafrir Cohen * Makefile: Don't die when there is no udev rules dir (on an installtion with INSTALL_PREFIX explicitly set). r2290 | tzafrir | 2007-03-07 21:14:30 +0200 (Wed, 07 Mar 2007) | 3 lines 2007-03-05 17:02 +0000 [r2288] Tzafrir Cohen * /, xpp/xpd.h: Found a proper "marker" for the gfp_t typedef. Now every 2.6.9 is supported. r2286 | tzafrir | 2007-03-05 18:14:11 +0200 (Mon, 05 Mar 2007) | 2 lines 2007-03-05 05:42 +0000 [r2283] Kevin P. Fleming * build_tools/make_firmware_object, wcte12xp.c, /: Merged revisions 2280-2282 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2280 | kpfleming | 2007-03-04 23:34:43 -0600 (Sun, 04 Mar 2007) | 2 lines ensure that we run objdump in the most generic language possible to avoid complications on non-English systems (issue #9196) ........ r2281 | kpfleming | 2007-03-04 23:40:37 -0600 (Sun, 04 Mar 2007) | 2 lines remove stray character that my editor decided to add ........ r2282 | kpfleming | 2007-03-04 23:41:30 -0600 (Sun, 04 Mar 2007) | 2 lines this driver does not use workqueues, so does not need this header (issue #9196) ........ 2007-03-02 22:20 +0000 [r2267-2273] Tzafrir Cohen * zaptel.init: Support proper loading of the Astribank (xpp) with proper initialization. * Makefile: Don't "fail" a modprobe of ztdummy just because zaptel.conf is bad. * /, xpp/Makefile: Clarify a cyptic build message. r2266 | tzafrir | 2007-03-02 22:40:06 +0200 (Fri, 02 Mar 2007) | 2 lines 2007-03-01 19:50 +0000 [r2244-2259] Tzafrir Cohen * xpp/xbus-core.c, /: r2257 | tzafrir | 2007-03-01 21:29:12 +0200 (Thu, 01 Mar 2007) | 2 lines SLAB_KERNEL is an obsolete alias of GFP_KERNEL. Fix build on Vanilla 2.6.20 . * /, xpp/utils/Makefile: r2252 | tzafrir | 2007-02-28 22:57:52 +0200 (Wed, 28 Feb 2007) | 3 lines Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 (and actually work, this tine). * /: Forgot to update properties * xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h, xpp/utils/hexfile.h, xpp/xproto.c, xpp/utils/zconf/Zaptel, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h, xpp/xpd.h, xpp/firmwares/USB_1150.hex, xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/zconf/Zaptel/Xpp, xpp/card_bri.c (added), xpp/xbus-core.c, xpp/utils/zconf/Zaptel.pm, xpp/utils/test_parse.c, xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/card_bri.h (added), xpp/utils/xpp_fxloader, xpp/utils/fpga_load.c, xpp/xbus-core.h, xpp/utils/lszaptel (added), xpp/utils/xpp_sync (added), xpp/.version (added), xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c, xpp/card_fxs.c, xpp/card_global.c, xpp/Makefile, xpp/utils/Makefile, xpp/utils/zconf (added), xpp/firmwares/USB_1140.hex, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/utils/zt_registration (added), xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf, xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: xpp rev. 3495: ------------------------------------------------------------------------ r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) | 4 lines * xpp rev. 3495: fix a race in the FXO driver of recent weeks. * Add the Astribank BRI driver (though still needs bristuffed zaptel to build and thus will not build by default) ------------------------------------------------------------------------ r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) | 18 lines Xorcom rev. 3491: * Version of xpp modules is set from xpp/.version, rather than "unknown". * Astribank devices are now initialized in parallel: faster startup when there are multiple Astribanks. * Re-added support for the old format of /proc/xpp/sync write: (echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered. * Firmware update to fix a PCM issue. * Fixed a build issue with kernel 2.6.8 . * Fixed missing initialization in Zaptel::Xpp::Xbus . * genzaptelconf will now set FXS ports as LS by default. To set them as KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel (Also a workaround for #7755 ). * Groundwork for sync from zaptel master span: if zaptel is built with ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its drift from the zaptel sync master. * USB firmware update: had bad lines checksums (and fxload did not report). * fpga_load can now better report bad hex file checksum ;-) . ------------------------------------------------------------------------ r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) | 3 lines Add the Zaptel and Zaptel::Xpp perl modules, and some simple utilities that use them. disabled by default for now. ------------------------------------------------------------------------ r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) | 2 lines Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 . 2007-02-26 18:20 +0000 [r2230-2233] Joshua Colp * Makefile, /: Merged revisions 2232 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2232 | file | 2007-02-26 13:18:13 -0500 (Mon, 26 Feb 2007) | 2 lines Just in case... set hotplug firmware loading option to no if on a 2.4 kernel. (issue #9140 reported by velter) ........ * Makefile: Move menuselect build options inclusion to before it is initially used otherwise the needed variables may not be present at time of use. (issue #9145 reported by jmls) 2007-02-26 10:13 +0000 [r2229] Tzafrir Cohen * doc/fxotune.8: The fxotune man page was misleading. Dumping some content into it. Still needs work. 2007-02-24 00:13 +0000 [r2215-2220] Kevin P. Fleming * datamods/Makefile, wct4xxp/Kbuild (removed), Makefile, wcte12xp.c (added), wct4xxp/Makefile, zaptel.xml, hpec (added), zaptel.c (removed), zttranscode.c, wctc4xxp (added), Makefile.kernel26 (added), wct4xxp/Makefile.kernel26 (added), zaptel.h, firmware/firmware.xml, zaptel-base.c (added): partial update to support all the stuff that went into Zaptel 1.2 recently... this definitely still broken for 2.4 kernels, and maybe for 2.6 as well :-) includes: Makefile split and reorganize TE120P driver TC400B driver HPEC support (not yet complete) 2007-02-21 17:27 +0000 [r2200-2209] Matt Frederickson * wct4xxp/base.c, /: Merged revisions 2208 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2208 | mattf | 2007-02-21 11:26:05 -0600 (Wed, 21 Feb 2007) | 2 lines Make sure we do the IRQ fix in the gen1 interrupt handler as well. ........ * wct4xxp/vpm450m.c, /: Merged revisions 2199 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2199 | mattf | 2007-02-21 09:57:20 -0600 (Wed, 21 Feb 2007) | 2 lines Make sure we do the check for memory allocation failure. ........ * wct4xxp/vpm450m.c, /: Merged revisions 2198 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2198 | mattf | 2007-02-21 09:49:50 -0600 (Wed, 21 Feb 2007) | 2 lines Reduce our stack usage when using the vpm450m ........ 2007-02-21 14:00 +0000 [r2195] Kevin P. Fleming * build_tools/make_svn_branch_name, /: Merged revisions 2194 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2194 | kpfleming | 2007-02-21 08:00:20 -0600 (Wed, 21 Feb 2007) | 2 lines use new tag version numbering script ........ 2007-02-20 20:17 +0000 [r2180] Russell Bryant * Makefile: Fix the check that ran the install for xpp/utils. Also, add a target to build them, and clean the directory in the clean target. (issue #8894, tzafrir) 2007-02-17 17:15 +0000 [r2170] Tzafrir Cohen * xpp/utils/Makefile: xpp/utils: Use autoconf's test for libusb. 2007-02-16 22:18 +0000 [r2167] Matt Frederickson * /, wctdm24xxp.c: Merged revisions 2166 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2166 | mattf | 2007-02-16 16:14:48 -0600 (Fri, 16 Feb 2007) | 2 lines Fix detection of second single port modules so it actually works now. ........ 2007-02-12 23:42 +0000 [r2158-2160] Joshua Colp * firmware/Makefile, Makefile: Add hotplug-uninstall target to main Makefile and make the firmware Makefile keep a record of the installed firmware in the hotplug directory. This means that as long as you have the latest version of firmware installed your checkout will never install it again, and all new checkouts will not either. This might also help those building packages for distros. 2007-02-11 15:48 +0000 [r2151] Tzafrir Cohen * xpp/xbus-core.c: struct inode and debugfs: break some Fedoras rather than all others. (from changeset 2150) 2007-02-10 20:43 +0000 [r2147] Joshua Colp * firmware/Makefile: Only attempt to install firmware to the hotplug directories if any was selected. 2007-02-10 00:22 +0000 [r2142-2146] Kevin P. Fleming * zaptel.xml: add some inter-module dependencies and add wctc4xxp to menuselect list * zaptel.xml: clean up module naming there is no need to enable the user to skip building zaptel or ztdynamic (probably zttranscode too... menuselect needs an upgrade) 2007-02-09 18:39 +0000 [r2136-2140] Joshua Colp * firmware/Makefile: It's probably a good idea to make the tarballs a requirement to make the object files. * firmware/Makefile, wct4xxp/base.c, Makefile: Drop the need for header files by using non-versioned binary files. 2007-02-09 15:06 +0000 [r2123-2135] Tzafrir Cohen * Makefile: Fix 'make clean' on kernel 2.4: datamods is only made on 2.6. * Makefile: Build xpp/ for kernel >= 2.6.8, not >=2.6.9. * xpp/xpp_zap.c: Now 'chans' is used after all. * xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h, xpp/xpd.h, xpp/init_card_4_23 (removed), xpp/init_card_4_24 (added), xpp/init_card_6_24 (added), xpp/xbus-core.c, xpp/utils/adj_clock.c, xpp/utils/xpp_fxloader, xpp/xbus-core.h, xpp/utils/fpga_load.c, xpp/xdefs.h, xpp, xpp/utils/xpp.rules (added), xpp/firmwares/FPGA_1141.hex (added), xpp/card_fxo.c, xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/zaptel-helper (added), xpp/zaptel-helper (removed), xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8, xpp/firmwares/USB_1140.hex (added), xpp/zap_debug.c, xpp/utils/fpga_load.8, xpp/init_card_3_23 (removed), xpp/init_card_3_24 (added), xpp/zap_debug.h, xpp/init_card_7_24 (added), xpp/xpp_log.h (added), xpp/utils/genzaptelconf, xpp/xpp_usb.c: Branch 1.4 is back in sync (currently: xorcom rev. 3332): * Performance improvements for multi-XPD (span) devices. * Astribank BRI driver (in next commit). * Changes under /proc: - XBUS and XPD numbers have two digits. - Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]* - Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop. * Several countries (South Africa, UAE, anybody else) require a shorter ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011. * Use tasklets to move most of the interrupt PCM copying out of the interrupt. * Debugfs-based code to dump data to userspace (used to debug BRI D channel). * Pretend every 2.6.9 actually has later RHEL's typedefs. * fpga_load supports /dev/bus/usb . * Fixed physical order sorting in genzaptelconf. * Reverse polarity and power denial detection. * A short led flash at registration time. * Add a real version of the xpp modules to them (independent of the Zaptel version). * Update our line status even when not registered. * Fixed a false SIG_CHANGED when inserting or removing cable to FXO. * Fixed compilation fixes for 2.6.20 (Bug #8982) * A cleaner fix for the bool changes of 2.6.19 . * Automatically detect echo_can_state_t at debug time. * Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile time. * Bug-fixes to zaptel-helper. Moved to xpp/utils . * Xbus protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3). XPS Init scripts renamed accordingly. 2007-02-07 21:25 +0000 [r2111-2120] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 2119 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2119 | kpfleming | 2007-02-07 15:22:44 -0600 (Wed, 07 Feb 2007) | 2 lines don't allow wct4xxp workqueue support to be built against kernel 2.6.20... it's not going to work ........ * Makefile, xpp/xbus-core.c, /: Merged revisions 2110 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2110 | kpfleming | 2007-02-07 14:29:22 -0600 (Wed, 07 Feb 2007) | 3 lines build XPP on the kernels that Xorcom says are OK to build on update workqueue usage to conform to kernel 2.6.20 API ........ 2007-02-07 20:01 +0000 [r2107] Joshua Colp * wct4xxp/vpm450m.c, build_tools/make_tree (added), firmware (added), wct4xxp/base.c, Makefile, configure, wct4xxp/OCT6114-64D.ima (removed), firmware/firmware.xml, makeopts.in, firmware/Makefile, wct4xxp/Kbuild, zaptel.xml (added), wct4xxp/Makefile, menuselect-tree (removed), wct4xxp/OCT6114-128D.ima (removed), configure.ac: Merge in zaptel-firmware branch. This basically downloads the firmware from the FTP site and builds the appropriate headers based on the current version. Drivers just know they need a certain firmware and get fed the current version. If this prevents your zaptel from building do a make distclean and start fresh or make sure the firmware is checked in make menuselect. 2007-02-07 19:55 +0000 [r2105] Kevin P. Fleming * /, zttranscode.c: Merged revisions 2103 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2103 | kpfleming | 2007-02-07 13:52:29 -0600 (Wed, 07 Feb 2007) | 2 lines include headers we need... new kernel releases won't do it for us ........ 2007-02-07 16:51 +0000 [r2099] Russell Bryant * ztcfg.c: In case the ZT_GETVERSION ioctl fails, ensure that the buffers are initialized to "Unknown" so that we don't try to print uninitialized string buffers. (issue #8992, Oron Peled, tzafrir) 2007-02-05 21:55 +0000 [r2087] Kevin P. Fleming * Makefile, /: Merged revisions 2086 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2086 | kpfleming | 2007-02-05 15:54:40 -0600 (Mon, 05 Feb 2007) | 2 lines fix version-numbering logic ........ 2007-01-31 20:19 +0000 [r2065-2066] Tzafrir Cohen * xpp/zaptel-helper (added): r2064: tzafrir | 2007-01-31 21:48:39 +0200 zaptel-helper deserves wider exposure. Note: it is not getting installed. However it will probably help preven the braking of Astribank drivers loading for those who do care. * xpp/utils/genzaptelconf: Merging 1.2 changes of genzaptelconf: * -l (list) now works reliebly. * Cleared some leftover writes to standard output. * Fixed xpp spans sort order. 2007-01-31 14:12 +0000 [r2039-2044] Kevin P. Fleming * pciradio.c, zttool.c, wct4xxp/base.c, ztcfg-dude.c, Makefile, zaptel.c, torisatool.c, torisa.c, tonezone.c, ztdynamic.c, wcfxsusb.c, ztmonitor.c, makefw.c, build_tools/genmodconf, ztcfg.c, wct1xxp.c, wctdm.c, ztd-eth.c, /, wcusb.c, wctdm24xxp.c, wcfxo.c, tor2.c: Merged revisions 2043 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2043 | kpfleming | 2007-01-31 08:06:34 -0600 (Wed, 31 Jan 2007) | 4 lines fix up author email addresses use the kernel's built-in support for module aliases instead of manually doing it in modprobe.conf or equivalent add wctdm8xxp alias for wctdm24xxp ........ * wct4xxp/base.c, /: Merged revisions 2038 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2038 | kpfleming | 2007-01-30 19:33:25 -0600 (Tue, 30 Jan 2007) | 2 lines final fix for non-hotplug firmware loading ........ 2007-01-30 18:11 +0000 [r2019] Russell Bryant * /: Blocked revisions 2018 via svnmerge ........ r2018 | russell | 2007-01-30 12:11:11 -0600 (Tue, 30 Jan 2007) | 5 lines - Make the build of xpp occur with 2.6.8 or above, instead of 2.6.10 - remove the installation of the userspace tools - remove the architecture check (issue #8894, tzafrir) ........ 2007-01-29 19:21 +0000 [r1998] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1996 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1996 | kpfleming | 2007-01-29 13:20:32 -0600 (Mon, 29 Jan 2007) | 2 lines _really_ fix the non-hotplug firmware case ........ 2007-01-27 16:16 +0000 [r1988] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1987 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1987 | kpfleming | 2007-01-27 10:14:54 -0600 (Sat, 27 Jan 2007) | 2 lines properly reference the size symbol produced by objcopy ........ 2007-01-26 15:27 +0000 [r1969-1982] Matt Frederickson * wctdm24xxp.c: Add additional product support. 2007-01-24 13:11 +0000 [r1954] Kevin P. Fleming * /, wcfxo.c: Merged revisions 1953 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1953 | kpfleming | 2007-01-24 07:01:36 -0600 (Wed, 24 Jan 2007) | 2 lines might as well fix this driver too :-) ........ 2007-01-24 00:38 +0000 [r1944] Russell Bryant * Makefile, /: Merged revisions 1943 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1943 | russell | 2007-01-23 18:35:48 -0600 (Tue, 23 Jan 2007) | 3 lines If the xpp pieces get built, install the userspace utilities as well. (issue #8894) ........ 2007-01-23 21:49 +0000 [r1937] Matt Frederickson * wcte11xp.c, wct1xxp.c, wctdm.c, /, wctdm24xxp.c: Merged revisions 1936 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1936 | mattf | 2007-01-23 15:28:14 -0600 (Tue, 23 Jan 2007) | 3 lines Make sure we don't clear the interrupt before we might have received it in shared interrupt line scenarios. ........ 2007-01-23 15:39 +0000 [r1921-1924] Kevin P. Fleming * /, ztd-eth.c: Merged revisions 1923 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1923 | kpfleming | 2007-01-23 09:39:12 -0600 (Tue, 23 Jan 2007) | 2 lines use the proper function prototype for 2.6 kernels ........ * xpp/xpp_zap.c, pciradio.c, wctdm.c, /, zaptel.c, torisa.c, wctdm24xxp.c: Merged revisions 1920 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1920 | kpfleming | 2007-01-23 09:25:42 -0600 (Tue, 23 Jan 2007) | 2 lines clean up various compiler warnings ........ 2007-01-23 01:58 +0000 [r1913] Joshua Colp * /, zonedata.c: Merged revisions 1912 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1912 | file | 2007-01-22 20:57:00 -0500 (Mon, 22 Jan 2007) | 2 lines Fix Congestion tone for Australia. (issue #8891 reported by JT) ........ 2007-01-22 22:43 +0000 [r1892-1899] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1898 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1898 | kpfleming | 2007-01-22 16:43:06 -0600 (Mon, 22 Jan 2007) | 3 lines use better definition for linked-in firmware data ensure that hotplug-loaded firmware is released when we are finished with it ........ * wct4xxp/base.c, /: Merged revisions 1891 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1891 | kpfleming | 2007-01-22 15:12:35 -0600 (Mon, 22 Jan 2007) | 2 lines make the non-hotplug firmware case actually compile again ........ 2007-01-22 21:04 +0000 [r1889] Jason Parker * Makefile: Fix typo in Makefile Issue 8885, patch by James 2007-01-22 20:59 +0000 [r1878-1887] Kevin P. Fleming * wct4xxp/base.c, /: Merged revisions 1886 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1886 | kpfleming | 2007-01-22 14:58:30 -0600 (Mon, 22 Jan 2007) | 2 lines might be good if i committed the working version of this code... ........ * wct4xxp/vpm450m.c, wct4xxp/base.c, wct4xxp/vpm450m.h, /: Merged revisions 1877 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1877 | kpfleming | 2007-01-22 12:58:34 -0600 (Mon, 22 Jan 2007) | 2 lines update to PR47 Octasic API kit, and use new GetCapacityPins API call to only attempt downloading the correct firmware for the modules we find ........ 2007-01-18 23:50 +0000 [r1855] Matt Frederickson * wct4xxp/base.c: Backporting revs 1812 and 1854 into 1.4. 2007-01-16 23:45 +0000 [r1836] Jason Parker * /, fxsdump.c (removed): Merged revisions 1835 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1835 | qwell | 2007-01-16 17:44:28 -0600 (Tue, 16 Jan 2007) | 6 lines Remove file that was never (literally) able to compile - dates all the way back to zaptel 0.8.0 If we can figure out where this coeffs.h comes from, I suppose it would be easy to add this back in the future. Issue 8493 ........ 2007-01-16 04:38 +0000 [r1820-1828] Kevin P. Fleming * wct4xxp/vpm450m.c, build_tools/make_firmware_object, /: Merged revisions 1826-1827 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1826 | kpfleming | 2007-01-15 22:30:00 -0600 (Mon, 15 Jan 2007) | 3 lines make the 'firmware object' files load the firmware blobs as read-only data simplify the code that uses the firmware objects a bit ........ r1827 | kpfleming | 2007-01-15 22:37:06 -0600 (Mon, 15 Jan 2007) | 2 lines use latest Octasic API tag ........ * wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c, Makefile, build_tools/make_firmware_object (added), wct4xxp/Makefile, wct4xxp/vpm450m.h, /, wct4xxp, wct4xxp/fw2h.c (removed): Merged revisions 1818 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1818 | kpfleming | 2007-01-15 19:28:54 -0600 (Mon, 15 Jan 2007) | 3 lines eliminate the fw2h tool, and instead use objcopy to directly make object files from the firmware binary files pass HOTPLUG_FIRMWARE down to the module build so that we can avoid various compiler warnings ........ 2006-12-30 19:11 +0000 [r1774] Joshua Colp * Makefile, /: Merged revisions 1773 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1773 | file | 2006-12-30 14:09:50 -0500 (Sat, 30 Dec 2006) | 2 lines Specify full path to restorecon instead of assuming it will be available from what is in $PATH. (issue #8671 reported by djflux) ........ 2006-12-27 22:49 +0000 [r1767] Kevin P. Fleming * xpp/xpp_zap.c, xpp/card_fxo.c, /, xpp/card_fxs.c, xpp/xpp_usb.c: Merged revisions 1766 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1766 | kpfleming | 2006-12-27 16:47:19 -0600 (Wed, 27 Dec 2006) | 2 lines remove pointless duplication of ZAPTEL_VERSION that causes these modules to be rebuilt every time a commit is made to any part of Zaptel ........ 2006-12-23 Kevin P. Fleming * Zaptel 1.4.0 released. 2006-12-18 14:01 +0000 [r1726-1729] Tzafrir Cohen * xpp/xdefs.h, xpp: r1724@boole: tzafrir | 2006-12-18 15:55:59 +0200 Code is 2.6-specific anyway, no need for an explicit test. * xpp, xpp/xpp_usb.c: r1723@boole: tzafrir | 2006-12-18 15:54:04 +0200 Use the internal version (without locking) of usb_reset_device. Intended for kernel 2.6.9 and earlier. Finally full support of 2.6.8 and 2.6.9. r2937: diego | 2006-12-17 14:20:36 +0200 r2940: tzafrir | 2006-12-17 16:32:51 +0200 * xpp/xpp_zap.c, xpp: r1722@boole: tzafrir | 2006-12-18 15:50:36 +0200 xpp_zap.c: Better error hanlding during module init. orig r2948: oron | 2006-12-17 18:54:00 +0200 * xpp, xpp/xpd.h: r1721@boole: tzafrir | 2006-12-18 15:46:42 +0200 Assume every 2.6.9 kernel is a later RHEL4 kernel, which backported the gfp_t typedef. Either way we break some systems). r2938: diego | 2006-12-17 14:22:16 +0200 2006-12-15 13:50 +0000 [r1716-1719] Tzafrir Cohen * xpp/xpp_zap.c, xpp/card_fxo.c, xpp/README.Astribank, xpp/utils/xpp_fxloader, xpp/utils/genzaptelconf, xpp: Sync to xpp RELEASE-1.2.0 2933. r2847@boole: diego | 2006-12-03 10:33:00 +0200 added documentation which explains which packages are needed to build the drivers on different distributions. r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200 README.Astribank: A typo in the sample config (changeset:2861). r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200 Re-accept changeset:2832 after all. r2892@boole: tzafrir | 2006-12-08 02:46:07 +0200 Merge genzaptelconf changeset:2866 from trunk: * Zapata comment on unidentified channel goes to $zapata_file * Correct pattern for Sangoma A200 card's channels. r2893@boole: tzafrir | 2006-12-08 03:11:37 +0200 genzaptelconf: * Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel. * Do print the original line for every channel. r2909@boole: tzafrir | 2006-12-10 20:03:59 +0200 Add some sleeps in older kernels in the firmware loading script. r2932@boole: tzafrir | 2006-12-14 17:30:12 +0200 Make the warning about a call to off-hook FXO debug. At least if we cannot suppress it at module load time. r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200 Don't redefine 'bool' on newer kerenls to fix building with kernel 2.6.19. Taken from Digium tree. (from changeset:2930) * xpp/firmwares/FPGA_1151.hex, xpp/firmwares/FPGA_FXS.hex, xpp: r1715@boole: tzafrir | 2006-12-15 14:35:26 +0200 Firmwares to fix caller ID detection timing issue. 2006-12-12 Kevin P. Fleming * Zaptel 1.4.0-beta3 released. 2006-12-11 19:07 +0000 [r1698-1701] Kevin P. Fleming * /, xpp/xdefs.h: Merged revisions 1700 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1700 | kpfleming | 2006-12-11 13:05:43 -0600 (Mon, 11 Dec 2006) | 2 lines kernel 2.6.19 now has a type called 'bool', although it's not completely implemented so there will still be some warnings when building xpp against 2.6.19 kernel headers ........ * pciradio.c, wct4xxp/base.c, wcte11xp.c, wct1xxp.c, wctdm.c, /, torisa.c, wcusb.c, wctdm24xxp.c, zaptel.h, tor2.c, wcfxo.c: Merged revisions 1697 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1697 | kpfleming | 2006-12-11 12:27:15 -0600 (Mon, 11 Dec 2006) | 2 lines kernel 2.6.19 API changes compatibility ........ 2006-12-06 23:25 +0000 [r1687] Joshua Colp * Makefile, ztcfg-dude.c, /: Merged revisions 1686 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1686 | file | 2006-12-06 18:22:11 -0500 (Wed, 06 Dec 2006) | 2 lines Link ztcfg-dude against stdc++ so we get needed functions. (issue #8494 reported by Romik) ........ 2006-12-01 00:13 +0000 [r1673-1678] Tzafrir Cohen * xpp/card_fxo.c, xpp: r1671@boole: tzafrir | 2006-12-01 01:30:24 +0200 r2806@boole: oron | 2006-11-27 16:54:06 +0200 Fixed panic in ticket:147 merged code from changeset:2802 changeset:2804 * xpp/card_fxo.c, xpp: r1670@boole: tzafrir | 2006-12-01 01:29:57 +0200 r2794@boole: oron | 2006-11-26 14:24:15 +0200 Remove all SOFT_RING code (unused for a long time). * xpp/xpp_zap.c, xpp, xpp/xpd.h: r1668@boole: tzafrir | 2006-11-30 23:48:25 +0200 r2832@boole: tzafrir | 2006-11-29 11:06:06 +0200 Add parameter xpp_ec to the module xpp (xpp_zap.c). Defaults to 1. If 0, module will use Zaptel echo canceller even with XPP_EC_CHUNK. Parameter is read-only for now: cannot be set through /sys/modules. (Merge of changeset:2830) * xpp/utils/genzaptelconf, xpp: r1667@boole: tzafrir | 2006-11-30 23:46:46 +0200 r2831@boole: tzafrir | 2006-11-29 11:05:08 +0200 genzaptelconf: A list of countries for which to use busydetect. (backport of changeset:2829) * xpp/init_card_3_23, xpp/init_card_4_23, xpp/calibrate_slics, xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/Makefile, xpp/Makefile, xpp/utils/genzaptelconf, xpp: r1666@boole: tzafrir | 2006-11-30 23:46:11 +0200 r2817@boole: oron | 2006-11-28 13:39:47 +0200 Maintenance branch for asterisk-1.2.x 2006-11-30 00:24 +0000 [r1664] Jason Parker * build_tools/genmodconf, /: Merged revisions 1663 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1663 | qwell | 2006-11-29 18:23:33 -0600 (Wed, 29 Nov 2006) | 2 lines Fix issue that was discovered by using dash as /bin/sh instead of bash. ........ 2006-11-29 22:27 +0000 [r1661] Kevin P. Fleming * /, zconfig.h: Merged revisions 1660 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1660 | kpfleming | 2006-11-29 16:24:07 -0600 (Wed, 29 Nov 2006) | 2 lines clarify the BOOST_RINGER compile-time option ........ 2006-11-29 17:31 +0000 [r1656-1658] Matt Frederickson * ztcfg.c: Fix for #7860. Make sure we don't allow channel 16 to be clear if it's in E1/CAS mode. * zttool.c: Fix for (#8300) 2006-11-26 08:12 +0000 [r1642] Russell Bryant * wcte11xp.c, /: Merged revisions 1641 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1641 | russell | 2006-11-26 03:10:22 -0500 (Sun, 26 Nov 2006) | 3 lines Remove a misplaced semicolon which caused some debug output to be printed regardless of the debug setting. (issue #8414, gknispel_proformatique) ........ 2006-11-22 23:30 +0000 [r1637] Matt Frederickson * zaptel.c: Update for #8403 2006-11-21 15:19 +0000 [r1623] Tzafrir Cohen * xpp/utils/Makefile: Typo: SBINDIR -> BINDIR . 2006-11-17 17:47 +0000 [r1614-1615] Jason Parker * Makefile: Fix an issue (8071) where wct4xxp wasn't being put into /etc/modprobe.d/zaptel (or similar). There should be no reason that adding wct4xxp to the MODULES variable at this point in the Makefile, would cause any harm. Somebody please correct me if I'm wrong... (Fix is slightly different from 1.2) * /: Blocked revisions 1613 via svnmerge ........ r1613 | qwell | 2006-11-17 11:43:12 -0600 (Fri, 17 Nov 2006) | 5 lines Fix an issue (8071) where wct4xxp wasn't being put into /etc/modprobe.d/zaptel (or similar). There should be no reason that adding wct4xxp to the MODULES variable at this point in the Makefile, would cause any harm. Somebody please correct me if I'm wrong... ........ 2006-11-17 04:12 +0000 [r1611] BJ Weschke * /, zaptel.c: Merged revisions 1610 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1610 | bweschke | 2006-11-16 23:06:05 -0500 (Thu, 16 Nov 2006) | 4 lines mattf - I'm not sure if this is where you wanted the definitions placed. If not, please fix, but this gets the compiles working again for now. ........ 2006-11-17 00:52 +0000 [r1606-1609] Matt Frederickson * zaptel.c: Fix for 7991. * zaptel.c: Fix for 7769 2006-11-11 14:34 +0000 [r1590] Tzafrir Cohen * xpp/init_card_3_23, xpp/init_card_4_23: init_card[34]_23: merge from 2654,2655. * Redirect stderr to /dev/null. Without any redirection, it may fail with exitval=4 . Probably, fd 2 is closed and the shell (or sed which is used in the scripts) tries to write to it (or do some other I/O related syscall) which fails. * make XPP_BASE handling identical in the two scripts. 2006-11-09 15:58 +0000 [r1576] Russell Bryant * Makefile: fix an expression in the install target (issue #8321, tzafrir) 2006-11-08 23:06 +0000 [r1574] Kevin P. Fleming * wct4xxp/vpm450m.c, wct4xxp/base.c, wcte11xp.c, wct4xxp/vpm450m.h, /: Merged revisions 1573 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1573 | kpfleming | 2006-11-08 17:04:33 -0600 (Wed, 08 Nov 2006) | 3 lines clean up recent VPMOCT changes add support for Infineon FALC rev 2.2 ........ 2006-11-08 16:01 +0000 [r1571] Tzafrir Cohen * xpp/utils/print_modes.c: Fixed a typo in the "wctdm reimplementation". 2006-11-08 03:44 +0000 [r1566-1568] Kevin P. Fleming * wct4xxp, configure, configure.ac, makeopts.in: update configure script to add searching for libusb update svn:ignore for new firmware header file names 2006-11-06 22:48 +0000 [r1565] Matt Frederickson * wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c, wct4xxp/Makefile, wct4xxp/vpm450m.h, wct4xxp/OCT6114-64D.ima (added): Add support into 1.4 branch for new VPMOCT64 as well 2006-11-06 19:07 +0000 [r1557-1558] Tzafrir Cohen * xpp/init_card_3_23, xpp/init_card_4_23: Fixes for card init scripts from rev 2633: * Don't log card init scripts to /tmp/results . * Document how to trace, though. * init_card_4_23: don't re-open the slics file. * xpp/xpp_zap.c, xpp/utils/print_modes.c, xpp/utils/xpp_fxloader.usermap, xpp/firmwares/FPGA_1151.hex (added), xpp/xpp_zap.h, xpp/slic.c (removed), xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex (added), xpp/firmwares/USB_1130.hex (added), xpp/utils/USB_1130.hex (removed), xpp/utils/FPGA_FXS.hex (removed), xpp/slic.h (removed), xpp/init_data_3_20.cmd (removed), xpp/xpd.h, xpp/xproto.h, xpp/firmwares/USB_1150.hex (added), xpp/init_card_4_23 (added), xpp/calibrate_slics, xpp/xbus-core.c, xpp/init_data_4_19.cmd (removed), xpp/utils/adj_clock.c (added), xpp/utils/xpp_fxloader, xpp/xbus-core.h, xpp/xdefs.h, xpp, xpp/utils, xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank, xpp/card_fxo.h, xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8 (added), xpp/card_fxs.h, xpp/card_global.h, xpp/init_data_4_20.cmd (removed), xpp/init_card_3_23 (added), xpp/initialize_registers (removed), xpp/init_data_3_19.cmd (removed), xpp/firmwares/LICENSE.firmware (added), xpp/firmwares/README (added), xpp/utils/USB_8613.hex (removed), xpp/LICENSE.firmware (removed), xpp/utils/genzaptelconf, xpp/firmwares (added), xpp/xpp_usb.c: Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2 * Should build well. Almost final. * genzaptelconf: Also work when zap_autoreg=0 * README.Astribank updated for rev. 1.2. * xpp/utils/Makefile: Use $< with cc -c * Get xpp/utils configuration from autoconf (without changesin top dir) 2006-11-01 19:04 +0000 [r1547] Russell Bryant * Makefile, wct4xxp/Makefile, configure, configure.ac, xpp/utils/Makefile, makeopts.in: instead of setting HOSTCC and CC directly in the Makefile, use the information provided by the configure script (issue #8055, tzafrir) 2006-10-31 06:26 +0000 [r1543] Russell Bryant * Makefile, /: Merged revisions 1542 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1542 | russell | 2006-10-31 01:25:16 -0500 (Tue, 31 Oct 2006) | 3 lines fix the installation of wct4xxp for 2.4 kernels (issue #7964, fixed by gkloepfer, but the committed fix is slightly modified) ........ 2006-10-26 00:03 +0000 [r1536] Kevin P. Fleming * wctdm.c, /, wctdm24xxp.c: Merged revisions 1534-1535 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1534 | kpfleming | 2006-10-25 18:54:41 -0500 (Wed, 25 Oct 2006) | 2 lines do ProSLIC 3215 check properly ........ r1535 | kpfleming | 2006-10-25 19:00:31 -0500 (Wed, 25 Oct 2006) | 2 lines do ProSLIC 3215 check properly in this driver too ........ 2006-10-24 01:33 +0000 [r1528-1530] Russell Bryant * pciradio_vhdl.tar.gz (removed), raddiag.tar.gz (removed): Both of these files are corrupted and can not be decompressed, so they need to be re-added. (issue #8134) * /, doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: Merged revisions 1527 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1527 | russell | 2006-10-23 21:08:27 -0400 (Mon, 23 Oct 2006) | 3 lines convert some characters of ISO8859-1 encoding to be UTF-8 (issue #8200, jcollie) ........ 2006-10-20 01:26 +0000 [r1520] Joshua Colp * /, torisa.c, zaptel.h, zconfig.h: Merged revisions 1519 via svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1519 | file | 2006-10-19 21:23:26 -0400 (Thu, 19 Oct 2006) | 2 lines Later distros have now taken to removing this file as it has been deprecated for awhile now... so on kernels 2.6.18 or higher we can safely not include it. (props to jsmith) ........ 2006-10-18 02:15 +0000 [r1518] Russell Bryant * /: Blocked revisions 1517 via svnmerge ........ r1517 | russell | 2006-10-17 22:14:43 -0400 (Tue, 17 Oct 2006) | 3 lines remove ROOT_PREFIX, and move INSTALL_PREFIX to before the first time it is used (issue #7913, darren1713) ........ 2006-10-17 Kevin P. Fleming * Zaptel 1.4.0-beta2 released. 2006-10-17 16:40 +0000 [r1507] Russell Bryant * wct4xxp/base.c: Set the readbuf size to be the same size of the variable, readsize. This buffer was 31 bytes, while the readsize could be 32 bytes, causing a read into invalid memory. (issue #8155, araasch) 2006-10-11 17:25 +0000 [r1500] Joshua Colp * Makefile: Copy to both directories, not just the first one. 2006-10-02 23:50 +0000 [r1490] Matt O'Gorman * wctdm.c, wctdm24xxp.c: add support for setting gain registers on the fxo and fxs modules. 2006-09-20 Kevin P. Fleming * Zaptel 1.4.0-beta1 released.